On last modeler meeting my brother please me if I can built him some RC Boat.
He was excited by my Fisher boat Naxos.
So it was on me to find some plans for fisher boat.
I remember on plans of old Norwegian fisher boat model called ARTUR.
It's cult model in Czech and Slovak republic 😀 .
Standard length of this model is around 65 cm.
For better manipulation and transporting I mus make shorter version.
So I remake the plans and now I start built model with 41 cm length.
I hope you will enjoy the build with me.
MinI version of cult model In SK CZ -Fisher Boat ARTUR
On last modeler meeting my brother please me if I can built him some RC Boat.
He was excited by my Fisher boat Naxos.
So it was on me to find some plans for fisher boat.
I remember on plans of old Norwegian fisher boat model called ARTUR.
It's cult model in Czech and Slovak republic 😀 .
Standard length of this model is around 65 cm.
For better manipulation and transporting I mus make shorter version.
So I remake the plans and now I start built model with 41 cm length.
I hope you will enjoy the build with me.
Her is the first sheet of plans for this build.
[{"id":"1379336219","name":"1379336219.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379336219\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379336219\/s","isImage":true,"ext":"jpg"}]
Keel - 4 mm hard ply wood
Ribs - 3 mm Birch ply wood
Hull cover - 4x2 mm spruce planks covered with one layer of fibreglass 80g/cm2.
Cabins - 1.5mm hard ply wood
Keel - 4 mm hard ply wood
Ribs - 3 mm Birch ply wood
Hull cover - 4x2 mm spruce planks covered with one layer of fibreglass 80g/cm2.
Cabins - 1.5mm hard ply wood
Today I buy 155 mm shaft, coupling and 3 blade propeller with 30 mm of diameter.
Next update about start of build.
[{"id":"1379431263","name":"1379431263.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379431263\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379431263\/s","isImage":true,"ext":"jpg"}]
So today I find some free time and start work on hull for ARTUR.
Work goes well so from morning to lunch I prepare complete frame for covering with planks.
[{"id":"1379596545","name":"1379596545.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379596545\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379596545\/s","isImage":true,"ext":"jpg"}]
So today I find some free time and start work on hull for ARTUR.
Work goes well so from morning to lunch I prepare complete frame for covering with planks.
Today I cover the hull with planks. I fix it with fast glue.
When the hull will be done I coat inner side with epoxy.
[{"id":"1379683856","name":"1379683856.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379683856\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379683856\/s","isImage":true,"ext":"jpg"},{"id":"1379683846","name":"1379683846.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379683846\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379683846\/s","isImage":true,"ext":"jpg"},{"id":"1379683839","name":"1379683839.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379683839\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379683839\/s","isImage":true,"ext":"jpg"},{"id":"1379683832","name":"1379683832.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379683832\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379683832\/s","isImage":true,"ext":"jpg"}]
So the hull is ready for Impregnating with epoxy. Then will be covered with deck.
[{"id":"1379785193","name":"1379785193.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379785193\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379785193\/s","isImage":true,"ext":"jpg"},{"id":"1379785107","name":"1379785107.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1379785107\/l","thumbUrl":"https:\/\/hobby.land\/media\/1379785107\/s","isImage":true,"ext":"jpg"}]
from last update I make some progress in build.
After coating inner side with epoxy, I cover the deck with planks. Then I sand the deck and cut the holes for superstructures and service access. Then I finish the sides planking and start with superstructures. On last photo you can see the wires for position light on front mast. I cut two grooves on sides of mast and then I stick in two wires with glue and putty. After sanding its almost invisible.
(guys sorry for my English 😁 , if you see some errors just let me know 😛 )
[{"id":"1381233334","name":"1381233334.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1381233334\/l","thumbUrl":"https:\/\/hobby.land\/media\/1381233334\/s","isImage":true,"ext":"jpg"},{"id":"1381233353","name":"1381233353.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1381233353\/l","thumbUrl":"https:\/\/hobby.land\/media\/1381233353\/s","isImage":true,"ext":"jpg"},{"id":"1381233376","name":"1381233376.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1381233376\/l","thumbUrl":"https:\/\/hobby.land\/media\/1381233376\/s","isImage":true,"ext":"jpg"},{"id":"1381233396","name":"1381233396.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1381233396\/l","thumbUrl":"https:\/\/hobby.land\/media\/1381233396\/s","isImage":true,"ext":"jpg"}]
from last update I make some progress in build.
After coating inner side with epoxy, I cover the deck with planks. Then I sand the deck and cut the holes for superstructures and service access. Then I finish the sides planking and start with superstructures. On last photo you can see the wires for position light on front mast. I cut two grooves on sides of mast and then I stick in two wires with glue and putty. After sanding its almost invisible.
(guys sorry for my English 😁 , if you see some errors just let me know 😛 )
Never mind your English - that's not a problem. The boat is coming along very nicely and your skill is apparent from the photo's. it looks as if it will make a great boat for your brother!
Flack thanks, you tickle my ego 😁
I hope my brother will like it.
Any way, all work will go slower because I work on another project in same time.
I build "J" Class sail boat CHEVEYO in 1:25 scale.
I put here soon some photos.
So the hull is covered with one layer of 80g fibreglass.
and I make some littleness on board.
[{"id":"1381845695","name":"1381845695.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1381845695\/l","thumbUrl":"https:\/\/hobby.land\/media\/1381845695\/s","isImage":true,"ext":"jpg"},{"id":"1381845682","name":"1381845682.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1381845682\/l","thumbUrl":"https:\/\/hobby.land\/media\/1381845682\/s","isImage":true,"ext":"jpg"},{"id":"1381845674","name":"1381845674.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1381845674\/l","thumbUrl":"https:\/\/hobby.land\/media\/1381845674\/s","isImage":true,"ext":"jpg"}]
Hello peoples, after long time I attached the update of progress on ARTUR.
Job on hull is almost done. Now I work on super structures and lights and some deck details. I hope Brother will like it 😁
[{"id":"1399127235","name":"1399127235.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1399127235\/l","thumbUrl":"https:\/\/hobby.land\/media\/1399127235\/s","isImage":true,"ext":"jpg"},{"id":"1399127258","name":"1399127258.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1399127258\/l","thumbUrl":"https:\/\/hobby.land\/media\/1399127258\/s","isImage":true,"ext":"jpg"}]
Hello peoples, after long time I attached the update of progress on ARTUR.
Job on hull is almost done. Now I work on super structures and lights and some deck details. I hope Brother will like it 😁
thanks, but the work on ARTUR goes realy slow.
As you can read in first post original model is 65 cm (25,59 inch) long but I build it in 41 cm (16,14 inch) version.
