I waited as long as I could then taped the cockpits for a couple hours and this is where I'm at... final clear is on clean, well a couple nubs 🙄 I have a 12 x 12 room with ventilation in my garage to paint. I wear an approved mask, turn the furnace on bake it at about 80 F Happy with final result. Now I can take a day off 😔 Thanks RR

Good day, I got all the equipment installed and bench tested. It's a 36-70 brushless system running on 2S but capable up to 6S (I will never go there) 35kg steering servo and engine sound. No problems with installation or running and pleasantly no vibration 😁 Playing around with 12 cylinder sound downloads for the ESS one. Moving on to finish work with fittings etc.
RR

Another little project, I tried casting with resin for the first time last evening. The metal lenses didn't look good so I pushed them into dense clay. Then I mixed up some Total boat resin and tinted it with enamel paint and filled the molds. Today I removed them from the clay, cleaned them with sticker removing solvent and applied a clear coat. I think they will look much better. I will also use bare metal foil for the chrome trim. You could also add a small led with this process if you wanted. Thanks, RR

My question is...how do you all attach your deck fittings? I would like to hear different ways. I placed them all out and then said to myself...🤔 Thanks in advance for any proper ways.
RR

It's been a couple good days work, The pics can tell most of the story. Still working on the windshields. 😔 I hope to have a video soon...
RR

I can call this one finished. It took about 2 months start to finish. I will have a video of the maiden voyage as soon as I can. Hopefully the pond is in decent shape. Thinking about the next project.....
RR

I finally got the Typhoon in the pond... plenty of rain cleaned it right up. All the Canada geese are gone. 😉 Everything worked well, I had to set the steering rate down as it was very "touchy" I ran it for about 20 minutes, no overheating problems. So I call it a success! It is faster than scale speed for sure but I am pleased with that. Sorry for the poor quality video RR

I found a couple figures for the Typhoon. They are 6" tall and fit nicely. I think they add a realistic look especially on the water. I also got a 1/8 Chris Craft Cobra kit from my loving wife for Christmas. I will start a build log on soon. RR