Ribs one through seven in place

Rib 8 with rib install jig

Framing completed. Planking started.

Soaked 3mm x 9mm plank stock for a day

Pinned wet plank stock into position

Trimmed stock to its position

Allowed to dry for a day in place

Removed, glued up and repinned into final place

The first 5 rows of planking at ribs 20 & 21. The horizontal numbers are the thickness of the keel at each station. I got better with the alignment of the nails as the planking progressed🙄Here you can see the layering of the 3mm strips of the keel

The nails.I think I have used around 900 on the hull

Removed from the PLANKING JIG. Planking is about half way up

Planking progressing back in the build jig

The rough completed hull on its carrier

Internal view, along with masts, booms and gaffs

The JIBS WINCH under construction. 12V. Size on calipers in mm's. One side will take up as the other side lets out