See the build blog on this site

I have video now to show you.

to put a bit of fun back on the water for young and old. These bumper boats come as a kit in 4 great colours and take action men size figures

Purchased on well known auction site. Boat very dusty/dirty but sound. it is from a Robbe kit that was around about 10 years ago and has timber decking, built-in auxiliary motor, navigation lights, etc. A deep clean followed by a re-paint of the superstructure, rub the decking down and varnish, followed by a complete rub down and re-paint of the hull brought her back to a fine yacht. She is about 40 inches in length and sails beautifully and has great presence on the water.

I like Douglas Adams books. ..(and Terry Pratchett too)
But I was most attracted to Gusty Cat ...
So.. Model of thames barge , build according to modified plans of sb Lady Daphne in scale 1:28 (length cca 1 meter ).
it will be again a model with an auxiliary motor, staysail class.
I am currently grinding the laminate hull with several layers of putty.
It is an ungrateful job.

In contrast to all that amazing power stuff below here is a very tranquil and sedate picture of my A class yacht in light breeze at Ilfracombe pond recently. Les Breame

In this follow-up video, Richard, a member of the Offshore Model Racing Association (OMRA) gives me some insight into racing and his boat.

Have to admit that this is not something I was aware of until very recently...but in my quest to broaden my YouTube channel to all things RC I found the Offshore Model Racing Association (OMRA). I contacted them and they invited me down to their most recent racing event in Southampton. Despite the bumpy conditions there was some close racing and I think I captured the flavour of what it was all about.

By way of a contrast I found some video from 2014 at the St Helens Open Day.
Beautiful scale model Crash tender operating at some speed.
Nostalgic or wot.
Great model Paul and well sailed
Dave

Nice sunny Sunday Sail at Boundary Park so took the Crash Tender for a spin
28XX brushless 11.1v 2200 Lipo 35mm three blade brass prop.
Uses 30 amp cars ESC with small fan.
Tx set to 55% on throttle otherwise it takes off. Rudder throw at 50% for same reason. Switchable to 100% for slow speed manouvers.
Great fun.
Dave

Tony Birds TANWEN paddle steamer at Tilford this year. Les Breame

She is a 50" 26 cc petrol engine boat. She runs very well and sits on the water on the turns as if she is stuck to it. Like an idiot I run her up the side of the pond and she now needs both a new propshaft and prop.