here my robbe smaragd in heavy wind conditions !
sails like a beauty 😁 for an old big lady !

my first graupner carina named "juliette" under attack by crabs 😁

refitted Robbe Sirius IRC 88 (by stock maritime) completely new electronics and fittings, resprayed in 2k polyurethane topcoat

I bought the Moorcock from a fellow boater and decided to rebuild her as the Moorcock. The hull was stripped bare and the prop-shaft tube removed and completely remade with a new prop. The hull was then repainted and the life boat and davits added The superstructure was cleaned up and remade with a Robbe spring loaded grappling iron added to the rear deck.She is powered by a 24v scooted motor salvaged from a garbage bin and has 4 x 12v 7amh SLA's to provide power. She is a good strong vesel to sail and is often used as a recovery tug.

This is a 1:100 scratch build of an (unnamed) Fort/Park class freighter, based on Jim Pottinger's drawings of a North Sands design. I'm building this as a DEMS ship. it has smoke and an overboard water discharge (if it works!).

These ships were built in many Canadian shipyards during WW2. Some went to British Admiralty - with Fort XXX names - and some went to Canadian government - named for Can. parks.

I haven't yet decided on the name for this model.

total scratch built on fibreglass hull 127cm x24 cm,11 months to build 6volt system brushed motor,3blade 35mm brass prop.

Here's my Robbe smaragd, its about 30 years old and recently I have refitted some electronics. sailwinch replaced for the genua fore sail. it just did not function very well.
It sails like a beauty and very steady on coarse.

here is my Robbe Sirius, the Stock maritime tuned version.
I traded an iphone 5c for this model.
it was in a used state without any working electronics.
Completely removed all electronics, stickers and rigg and started with sanding.
resprayed the hull in oyster 'pearl metalic' and started building up with new fittings , electronics etc
Sails like a beauty !

here is my 2nd Graupner Carina ( after the 1st one I just wanted to built another one and Ebay supplied - again- a 'barely started' set.
Taking apart the glued wooden parts was a bit of a challenge. However, the previous owner used cheap glue and all the parts could be dismounted without any damage.
(will post more pictures of the rebuilt )

Here's my "juliette' my 1st Graupner Carina from the old days !
|I bought her in a 'barely started condition' and took everything apart. Built her up step by step> (will post more pictures later)

Scratch Built patrol boat of BN. Cruises pretty smooth and nice. A bit heavy I guess, put a lot stuff there.

just picked this one up and it might sit there for a few weeks / months 😡 as other projects on the go now 👍 will need motor rudder and lots of work 😊