Many of you guys know that this is an old model that has been in the market for a long time and reproduced by many model companies like Dummas 1259 SC-1, ITC Model class craft 1:74 (plastic), Ringo Toy Corporation NC. C-5820200 1:74, Glenco model 1:74 (plastic) and a few others.
I don’t know if I have mentioned this before but I receive many request to build models for a local well know model company that is Model Expo owned by Marc Mosko, also owner of Model Shipways, Model Trailways, Model Airways and Guns of History.
This Subchaser is R/C but I never added all of the radios and servos since it was going to be shown on the Model Expo showcase.
So here is what I build with many scratch build items.
I hope you guys like it.
It’s a very nice and slick looking model, thank you for sharing that picture with us.
My kit is a Nauticurso from Brazil but Model Expo distributes it. There are so many things you could add to the model to make it look as real as possible.
“The Sub Chaser Archives” is the website I used for all of the reference need it.
At the club pond today I have completed the Orca to my satisfaction. the crew figures are complete and fitted in situ, Matt Hooper at the helm, captain Quint up front with the harpoon gun, chief Brody serving out the smelly chum at the stern. The battery ran for at least 1 hour, it’s a 3s lipo 2200,100c when coupled to the charger it had 70 % left in
Many thanks for the photos - a really impressive model!!
Each to his own, but I much prefer small water craft modelled to 1\24, 1\16 or even 1\12 scale - rather than far larger ships unavoidably modelled on a tiny scale.
With best wishes. Dr John F. Leeds and Bradford. MBC. 😊😊😊
I have begun the process, the Sterling kits living up to its rep, at one point there is some plywood, but mainly it's made from what appear to be second matchsticks...it weighs so little, it is hilarious. I plan on glassing it all over so it will eventually get some strength to her. But she's long and frail in this state...but I love her. Everything appears to be as straight as possibe, no horrible curves or bends. Still got my fingers crossed for her. Peace my friends, happy boating👍🤑😂😎😊😊
Hello again, here’s a picture of an M class destroyer which I built some years ago, she is of again balsa construction from Model Boat Magazine plans, I built over one winter about 9 years ago, she is sealed with dope and tissue which gives a smooth finish, the guns were constructed from plastic card, with brass rods for the barrels!
She was retired a couple of years ago, but recently she was brought out retirement and gifted to family friend was showing an interest in battle ships!
Scratch built motor gun boat from Bangladesh.
Tried my best to upgrade it into a brushless one. First attempt was brushed and it was kind of a pain in the ass.
It runs far better now.
As a follow-on to Grahams' comment on our latest collaboration on a smoke pulsing 'capacitor driven' device, we thought it was time to 'chuck it out there' and see what you think. I saw the vid on the guys warship with the very fancy gun smoke system a while ago and thought there must be a simpler way than the sophisticated and technical way he did it.
Having done press setting in my early days, I remembered that a big press we used to set had a hydraulic capacitor which helped get the ram moving (pretty much what electrical capacitors do for motors etc) I started with a common party balloon with no container and knew Graham would be interested, and it progressed from there. As usual, Graham has done a fancy bit of electronic control on his, with solenoid and timing and has it working nicely.
(just received my new solenoid which I will be adding in due course)
Balloon is stopped from filling by a micro switch to the air pump and air is released by solenoid at whatever timing you need (depending on how well your smoker can keep up). If the system has no leaks, the 'capacitor' can hold air indefinitely, ready for use, and will re-fill automatically, (pump only runs to re-fill) This idea can be modified to suit anything (guns, exhaust startup and run, steam to simulate steam whistle etc) Balloons of all shapes can be used eg -(long thin sausage balloons could be fitted inside a tube if space is an issue).
With a good air pump, the 'capacitor' will fill quite quickly and some good pressure can be achieved.
JB
Always thinking of improvements and new gadgets Martin, which might be useful for new model builds. At least Graham and I have got it pretty much sorted, so people can do modifications to suit their particular models. Main thing is that these devices are cheap and simple to make (in basic form) which is the whole idea, and can give your model that little bit extra. Most bits can be easily sourced from Ali Express/ Ebay etc.
JB
Looking forward to seeing what you used for jet drives - always wanted to modify a Tamiya PBR but the drives would be impossibly small - certainly no commercial ones available for 1/35 scale.
What hull was it that you used ? Looks like a good one.
Very interesting build sandkb, always fancied a build of one of these, since my build of a 1/35 plastic kit,
as redpmg requests, I would also like to know what jet drives you used, and the scale of the hull.😐
At last after 8 months I've finished my Vietnam River Gun Boat.
I've built this vessel using a made up fibreglass hull that pretty much measured up to the 1/9th scale with some modification that I wanted.
I will post photos of the build of the build over the next few weeks and answer any questions as they arise.
These pics show the initial hull modification underway.
Interested in your build of the Pibber River Gunboat. I have the Pro Boat version which performs well. Would like a bit bigger hull as there is not much room for normal size batteries.
Which hull did you use?
Also interested in the Patrol Craft Fast ( Swift boat)of the Vietnam era
Here are pictures of HMS Exeter - I built her over a period of time plank on frame hull, covered in styrene to simulate plating on the hull. The deck is all planked with individual planks - the guns are fully rotating and elevating but not firing :-).
Hi there
senile moment for me :-) as there is already a short build of HMS Exeter on here if you do a search - you will come across the build by me and there are some closeup pics on there.
Hellenic Navy - La Combattante IIIb class Fast Attack Craft
More great photos in this series taken by my friend at Albert Park Lake in Melbourne. These of my P28 - Ensign Simitzopoulos. Great wave patterns. These photos were all poster size in detail. I have had to shrink them to get them posted here. This boat is in my harbour.
The 1/35 scale boat is scratch-built, mainly from Balsawood and marine ply with a fibreglass covering. The guns can elevate and rotate. The radar units both rotate and there are LED navigation lights that I forgot to turn on. There is also a flashing red LED strobe warning system. It needs a little work to get the 4 LEDs a bright brighter.
Lew
Florida, USA
My kit is a Nauticurso from Brazil but Model Expo distributes it. There are so many things you could add to the model to make it look as real as possible.
“The Sub Chaser Archives” is the website I used for all of the reference need it.