I have way to much time to waste raking up the leaves & bagging them but I am still working on some of the models I got & this time it's the Bluenose kit that had all the masts broken off . I started it while our model boat club was at the Caledonia wood show . I try my best to get people to be interested in model boat building while I'm repair the model. The sails are up & now for the rat lines & a little painting & a few touch up here & there!

In every yard sale find you come across a box that at first you think its just a bunch of junk .But I came upon a half kit with lots of parts missing The Swift 1805 . The model boat club I'm in did a show at the wood show in Caledonia so I bought a sheet of plywood just for this Swift's keel & frames . I also found a Bluenose model that had masts broken in Needed of some major repairs.

On the weekend spotted a yard sale . The older gentleman had restored a model he had built but the cat got to it . So because of his age he had decided to no longer have a hobby . We talk about model boats & stuff & he gave the wood to me & the 3 models . Future Build blog projects Maybe but wood is always handy to have in case power goes out.

This is a slideshow of day 3 in the pavilion when all the boats were in (first vid was set-up day and only about 70% had arrived) By this stage, over 10.000 people had been through. I came down on the bus to take these pics (round trip 72km) went back home, picked up the car and trailer, came back down at 6pm Sunday and picked up the boat. All round a 216km trip (city and back 3 times, well worth the effort though.
JB
wouldn't load before, seems to be loading now.

Was invited to take my restored 1970s 12ft racing yacht (red and white one-93 at 1:3) down to put in the display this afternoon, at the Viaduct Event Center In Auckland, and decided to get some pics of the boats on and off water before the crowds come over the next 3 days. Lots of beautiful restored yachts and launches, as well as smaller racing and sailing dinghies. A couple of NZ designed and built Chris Craft copies inside as well. Also steam launches and a few models.

The boat at 1:54 and 3:12 does not have the usual V8 as you would expect, but has a 4 cyl Mercruiser motor, not as the drive motor, but as a generator running 3 high output alternators powering an electrical system for twin electric motors, (round black objects seen in pic, in front of petrol motor). Shafts run each side of petrol motor, Has large control boards on each side for each motor. Boat and laminated wooden trailer designed and built by the owner, Took 2000hrs to build,- absolutely immaculate workmanship.
Also a short vid on an Auckland ferry trip I took while waiting for the liner Queen Victoria to
depart
JB

Others may wish to consider building a dory too. I got the plans for mine from John Gardner’s book “ The Dory Book”, it’s available from The Wooden Boats store.

https://www.woodenboatstore.com

This is my very first wood model. I started to build her long time ago but when I got to the rigging part, I came to a screeching halt do to the lack of rigging knowledge.
After several years of being built without rigging, our cleaning lady knocked it off the base to the floor. It was a total disaster, 3 years after that, I decided to refurbished it and do the rigging with the help of this book.

Here we go again guys.
This is another model that Model Expo commissioned me to build because is a new model that they are selling and they need one for their model display showcase.
The name of this kit is “Artur”.
Artur is the most popular fishing vessel among Brazilian fishermen. Many are still active in Brazilian waters today.
Researching this vessel I found out that many other nations like Russia, Norway, and Switzerland also used it. This type of vessel was also used in WWII to fight against Hitler by carrying ammo for the French.
This kit has gone through many upgrades by Nauticurso (Brazilian model maker). The kit I built is their first version, so after researching I decided to replace or created many parts of my own.
It comes with the running hardware needed for full radio control operation. Instructions Model Shipways Inc. carefully translates manual into English containing many photos showing step-by-step assembly.
All pieces are laser cut Amazonian wood.
Length 25”
Scale 1:32
Guaranteed to bring lots of fun and challenging moments for newbies and experts.
Maybe you guys know more about this ship than me. If you have any information about this vessel, please share it, I will be very glad to hear it.
This is an old photo of the real ship; notice how it carries the lifeboats in the Pilots cabin deck.
I hope you guys like this model. It took me 6 months to finish it.

Bow all shaped wooden hull and upper structure is sealed. Hull has been covered with glass fibre. Ready for sanding and primer.

Hello everyone, I hope things are absolutely great in your neck of the woods...A great tug like this one being constructed in the local Toluca Lake shipyards, needs a good radar. I have gone with the @indows 95 look. I am also fully committed to adding some wooden IKEA sliding doors, they will be well-balanced, with a "fingertip touch" when I am through. I am following through with similar swung doors on the captain's cabin.

today WMBC had a 40th year celebration

I have begun the process, the Sterling kits living up to its rep, at one point there is some plywood, but mainly it's made from what appear to be second matchsticks...it weighs so little, it is hilarious. I plan on glassing it all over so it will eventually get some strength to her. But she's long and frail in this state...but I love her. Everything appears to be as straight as possibe, no horrible curves or bends. Still got my fingers crossed for her. Peace my friends, happy boating👍🤑😂😎😊😊