This model was originally scratch built in 1964 by my Dad as a 15th birthday present for me,the length over all is 60.5" with a beam of 17.5" and a theoretical draught of 3.5",not sure as to the actual design but it is meant to be 1/12th scale, it was originally powered by a 12 Volt windscreen wiper motor out of an old Mercedes car, and the radio gear was a home made system as well, but both are now well beyond repair and I am fitting an MFA 800 Motor with a Fusion Aquapower ESC rated at 125amp. run by a new 2.4 Ghz radio system.
When I get to sea trials stage I will send Update and possible video footage.This boat along with the rest of my harbour, will be on view at the Abbergavenny Steam Rally this weekend June 3rd and 4th(Sunday Monday) in the model section marquee.

Here are a few pics of my Scout which wwas originally built in 1958, but left in my parents loft when I left home in 1966, but thankfully still there when my Mum asked me to clear the attic for insulation installers last year.
So far have cleaned it and fitted a MabuchI Brushed motor of unknown power, but appears to work well at 6Volts running a 2 blade plastic prop 30mm 'S' type.
Havent got round to fitting radio gear yet, so have done tests as a free sailer, setting rudder on a slow arc and watching as I walk round pond.Will update as soon as next stage is complete.

HI just completed/refurbished an old and somewhat poor and sorry MFJ Fairey Fantome, complete stripdown repaint and new shafts/motors etc.
Now for some water trials to see what mods are required.

Have been resurrecting this old 34 1/2" FIREBOAT which was originally built in 1958 from an aerokits kit, for the last 12 months. Went for first sail at Cwmbran on Wednesday, and I am pleased to say it performed very well, But needs a little tweeking to get balance right as she sits a little low at the bow. Having been given some great advice by the local club members, I will be moving the motor and mount further back, and reducing size of prop as it used too much power. But still I'm happy with the performance and the fact it didn't leek. Will update as soon as I've done the mods.

Just thought I'd show you guys my boat with the "too fast" brushless setup. I have now put a smaller motor and turned it down on the controller. Almost lost it though 😁

Finaly after many months of searching, found a replacement drive motor for my Sea jet. Appologies for the short video clip, but its gives you enought to see. Absolute total fun to drive !

This slide show shows the build and final result of my scratch built Seaplane Tender. it is 1/12th scale and powered by 2 x 250 watt brushless motors. Built in 2011, it sails at Knightcote in Warwickshire and Tynemouth in the NE.

MY 34 inch and 46 inch Aerokits Fireboats are readied for the lake. The 46 inch is covered elsewhere in the gallery but the 34 inch was recovered a couple of years ago from a hulk and fitted with a 220 watt 1050 kv bruhless motor. With a 10.8 NiMH and 40mm 3 blade brass prop it looks great on the water.

This is a Deans Marine Kit which I built about 2 years ago. it is now fitted with a 180 watt 1100kv brushless motor running on 7.2 volts and using a Turnegy 18amp car brushless ESP. With a 35mm X type prop it FLIES.

Model Slipways 1/32 scale harbour tug kit built late summer/autumn 2011. Powered by MFA 2.5:1 geared motors running on 6 volts and powered through an Action P94 Mixer/speed controller to provide great steering performance -- easily turns on it own axis. Sails mostly at Knightcote Model Boat club

Model Slipways kit with fire monitors and bow thrusters. Powered by 2 x MFA 2.5 : 1 motors on 6 volts via Action P94 mixer ESCs. Sails mostly at Tynemouth model Boat Club

Here is my scratch built Seaplane Tender in !/12 th scale. it is powered by 2 x 250 watt brushless motors running on 7.2 volt Nmih batteries. Pictured here at Knightcote Model Boat Club in Warwickshire and a couple during construction.