Perhaps not a boat, but no pond is complete without one of these gems.
This lighthouse is fully remote controlled.
The lamp rotates at 12 rpm allowing a flash of light every 5 seconds.
A 5kg weight is mounted under the island and winched down to the bottom of the dam to anchor the island. The winch is powered by a 6V Ryobi Cordless Screw Driver's gearbox and motor.
The Fog Horn is operated by a 9V motor with a counterbalance causing a vibration inside the tower, amplifying the sound effect of a steam horn.
It's built at 1:35 scale and stands 80cm tall.

I built this model during four long years. my Lulonga is nearly whole scratchbuilt model (about 75 cm long) except the steering wheel and position lamps.
The model has a plywood and balsa hull construction ,plywood decks,from hard polystyrene sheets made superstructure,laminated with veneer. Sidewheels with skew paddles, two DC 12V independent electric motors with gearboxes controlled by ESC. Electric LED lights, steam sound module, sirene and horn.Tx/Rx 6 channel HK 2,4GHz.
completion expected in spring 2014
More infos about building you find at > www.paddleducks.co.uk <

some videos are here at Model Boats too >
http://mdlbt.com/19852

wiring diagram you can see here in my albums
http://tomarack.rajce.idnes.cz/RC_model_Lulonga#lulongaelschema1.jpg

Tug: Brooklyn tub test!

You can barely see it!

But, there's actually steam coming out of the Smoke Stack!

Simulated of course! LOL!

I finally managed to get out and do a video of SY Minnow. This was taken at Cheddar Steam Club and Jane and I were the only people there so had the water to ourselves. I have increased the displacement a little which has made her more stable in the wind. Although it doesn't look it, there was quite a breeze that day and you can see the boat heeling to the wind on occasions. I was very pleased with the mist unit as this was the first time I have seen it operate properly. I will do something about the masts being out of alignment!

Surprise! 😀😂
A good laugh from 92 years ago😊
See also

😎

A test post on behalf of redpmg.
The engines are built by a mate of his.
"The boats are built by a 90+ year old gent by the name of Alan Raubenheimer, who used to make Rose Pop Pop Boats - used to advertise in MB etc.
Now into his 90s he has finally given up production."
Here goes🤞
Doug
It woiks 😊; just ignore the 'Invalid file' notice and click the blue magnifying glass and then the download button.
Run with Windows Media Player.
When it opens Press F11 for full screen or drag a corner with the cursor to enlarge.
Resolution is not too good I'm afraid🤔
Despite the music the action takes place in SA not Hawaii!😉

PS 8.5.20. Video fixed and enhanced a little 😀😎

" Elsa ", is a steam dredge barge built by Buxton Model Boat Club member Dean Ratcliffe.
She is roughly 1.24 scale, approximately 43 inches by 8 inches and is made from recycled and up cycled materials wherever possible. She has a single rudder and propeller, powered by a single motor from a drill, and two 6v lead acid batteries. She is a totally freelance design.

As a follow-on to Grahams' comment on our latest collaboration on a smoke pulsing 'capacitor driven' device, we thought it was time to 'chuck it out there' and see what you think. I saw the vid on the guys warship with the very fancy gun smoke system a while ago and thought there must be a simpler way than the sophisticated and technical way he did it.

Having done press setting in my early days, I remembered that a big press we used to set had a hydraulic capacitor which helped get the ram moving (pretty much what electrical capacitors do for motors etc) I started with a common party balloon with no container and knew Graham would be interested, and it progressed from there. As usual, Graham has done a fancy bit of electronic control on his, with solenoid and timing and has it working nicely.
(just received my new solenoid which I will be adding in due course)

Balloon is stopped from filling by a micro switch to the air pump and air is released by solenoid at whatever timing you need (depending on how well your smoker can keep up). If the system has no leaks, the 'capacitor' can hold air indefinitely, ready for use, and will re-fill automatically, (pump only runs to re-fill) This idea can be modified to suit anything (guns, exhaust startup and run, steam to simulate steam whistle etc) Balloons of all shapes can be used eg -(long thin sausage balloons could be fitted inside a tube if space is an issue).

With a good air pump, the 'capacitor' will fill quite quickly and some good pressure can be achieved.
JB

Just for fun ! an interesting project for the new year ! - RC Sailing :- Mississippi Steam Boat from BMBC member - electric conversion with original steam / boiler setup .
Happy 2020 to all !!

Can you now stop tapping your feet ? 😎😁

Finally completed after near enough four years work off and on. Mind I am very happy with the result, the superstructure was slightly modified so as the steam plant can be removed easily in one piece.

Tug Brooklyn

Steam Engine Sound along with Steam Whistle Sound!
Sorry about the shaky camera.
Trying to do too much at one time!

Tug Brooklyn

Steam Engine Sound Generator Test!
With her Running Lights on!
I couldn't use her Steam Whistle!😤
I only had one 9 volt battery!😭

Anyway here goes nothing!