Had a large moment of enthusiasm yesterday and fitted the jet unit and associated bits. Then it was time to wet its bum for a test. First off, the jet wouldn't suck water without pushing the stern down slightly, (as I expected due to the boats' light weight.) I added 300g to the stern and she was away😊 Happiness filled I were😁!. Reversing bucket works very well (even though it's a bit of a blob on the transom). You really need one if you don't want to go forward forever, trying not to 'sail yourself into a corner'.

I Need to waterproof the pushrod holes in the transom but the bellows I bought are too stiff and compress too much, so I'll have to come up with another method, (probably some deflectors for a start. Only a problem when in reverse with a bit of throttle on. Plenty of power with the 2s I was using, but motor is rated 12-24v so it would scream, -even with a 3s. I'll start with 2s and see how it goes. Might have an initial blast on the lake this week if all goes well, although I'd like to finish the deck bits first.

Just waiting for some Voltage regs to come so I can complete the electrical side with the fancy bits.. The mechanical and electrical sides are as good as done, Grahams timer is working perfectly, with the water pump and air pumps hooked up (going to install a VReg on each one plus the smoker).

Another "Wee Nip" belonging to Paul from Leek joins the Sunday morning gathering on the Pavilion Gardens Lake in Buxton.

Shades of Autumn - Thursday sailing with Buxton Model Boat Club at the Pavilion Gardens Lake Buxton Derbyshire SK17 9AY.

Not something you see every day! Saw a 'Sealegs' boat coming in from over the horizon and it eventually came straight onto and up the beach past the Orewa surf club. It then proceeded about 300m down the main road (holding up the traffic) to the petrol station to fill up, then went back and down the beach, into the water and away. Guy broke a number of rules doing this but looked like one of those 'don't give a stuff' people, His wife and tiny kid (the only one with a life jacket) were sitting in the back all the time.

The Sealegs is an NZ designed and built (built in Albany- Auckland) boat sold (and copied) all round the world. Really amazing piece of kit. Drive is hydraulic, and driven by a small self start diesel motor in its' own compartment. If I ever won Lotto I'd certainly be looking at one😁 They have a special drive on trailer as well.

Not my lake in the thumbnail, don't know where that came from😐

Policing at the Pavilion Gardens Lake enlist a new "Rookie" from the Buxton Model Boat Club.
Under the watchfull eye of owner and builder Graham Royle, Decoy Duck Donald, turns a few heads while he Ducks and Dives to maintain decorum - !.
REMEMBER - change "quality settings to HD 1080p " when viewing on youtube.
More photos on "Boats Clubs & Lakes" / "Buxton Model Boat Club".

3 GPLs on the lake at once, all with different engines, 2 with onboard GoPros, 1 unfortunately with a battery that was about to fail...

On Bank Holiday monday 31st August 2020 , Buxton MBC put on a display at Buxworth Basin in the High Peak of Derbyshire.

Ref Wikipedia - Bugsworth Basin is a canal basin at the terminus of the Peak Forest Canal. It is located at Buxworth in the valley of the Black Brook, close to Whaley Bridge. It was once a busy interchange with the Peak Forest Tramway, for the transport of limestone and burnt lime.

FOR MORE PHOTOS SEE:- Boats Clubs & Lakes - Buxton Model Boat Club
https://model-boats.com/places/60518

Bionic Bill was out rowing on the lake again this morning. He had his 'radio' on 😀. Certainly drew a crowd.👍

Graham93

On the lake Aug 02, Aquacraft TS3 is powered by an OS21X nitro outboard... eventually flips on a turn 😝

Two new additions appeared at The Pavilion Gardens lakeside recently - belonging to BMBC members.
The models were - "Bonnie Lass", and " Milford Star " from Caldercraft.

The Buxton Model Boat Club sail at the Pavilion Gardens lake on Sunday and Thursday mornings - comments being - "an entertaining spectacle for all the family" and - "a Valuable asset and attraction to the town" .

Week 2 of back at the lake, with 2 big electric and a handful of fast IC boats... thrills and spills...😎

Have now received WTC from Nautilis Drydocks...a long process...held up with Customs...a few more components to be had and still a lot more research...need to get this right...my first sub....looking forward to commencing soon....but research, research, research...

Have no intention of leaving it on the bottom of some lake somewhere....