Harbour directory

Huntsman 31 1:10

Listed by renew ·

Specifications

Boat Length
31" (78.74 cm)
Boat Weight
204g (7 oz)
Motor Type
Brushless
Drive Type
Direct
Props
Single
Max Amps
274A
Battery Type
LiIon
Battery mAh
289 mAh
Prop Type
3 Blade
Prop Size
40mm
Run Time
352 min
Model Speed
376 km/h (233.6mph)

Photos

About this boat

My build of the huntsman 31, scale 1:10.

Comments

  1. RogerA1
    Warrant Officer
    Looks good I’m building the smaller one, but haven’t done much lately, it’s inspired me to get back on it
    Thanks
    Liked by renew
  2. ChrisF
    Vice Admiral
    Thanks. I based it on a method shown by a guy on the Mahem forum. Thin planking, 0.5mm thick, is glued onto a thin ply base which is then glued onto the deck. One advantage of this method is, that as you do it off the model if you are not happy with it you can do it again. I had to do this with my Huntress as it is a bit fiddly and the planks can split as you force them to curve.

    More information is given in my builds on the Model Boats Magazine forum under Build Blogs.

    Chris
    Liked by hermank and renew
  3. renew
    Chief Petty Officer 1st Class
    Wow love the decking 😍 need me to teach that 🤗
  4. ChrisF
    Vice Admiral
    I agree about the size, I had one of the 1:8 ones, which was a lovely model, but found it too cumbersome to move around and launch. Yours will be a nice size.

    I'm building mine at 1:12 to match a Huntress I have, as well as a Swordsman, which at 33" is nearing the limit of how big I want to go. I do intend to build something around 35" but that will be it.

    Chris
  5. renew
    Chief Petty Officer 1st Class
    I bought the 1/16 scale drawing. Boosted that with 50% on my scannner. Printed that out
  6. renew
    Chief Petty Officer 1st Class
    Hello, it’s about 89cm 35inch
    Just thought 1/16 was to smal and the 1/8 to big 😬
    Liked by Madwelshman
  7. ChrisF
    Vice Admiral
    Interesting scale, not come across one of that size before, which must be about 37" long. I'm guessing you adjusted the size of some existing drawings?

    Following with interest.

    Chris
    Liked by renew
  8. CB90
    Captain
    Hi renew,

    This is my collection of data for a Huntsman/swordsman that I restored.
    Good luck with the build I think a wooden version will go better than the Fibreglass one, I had as underside was too curvy for speed.

    Regards Roy
    Liked by RonBMK2 and renew

Delete this post?

It will be removed from the site.

Discard this draft?

Your draft will be deleted and cannot be recovered.

You have an unfinished draft

What would you like to do with it?