Hull skin pins
Thanks,I had a feeling that they had to come out as I have only out on one skin at the moment and it just did not look right with them in.
Thanks
Richard
Thanks
Richard
Hull skin pins
Hull skin pins
Thanks for your reply.
I have only put one of the bottom skins on at the moment and I thought this is not right.
I shall remove all the others,
When I come to do the other skins.
Thanks
Richard
I have only put one of the bottom skins on at the moment and I thought this is not right.
I shall remove all the others,
When I come to do the other skins.
Thanks
Richard
Hull skin pins
I have recently finished a sea queen and I took out the pins and filled the holes. in the past I once left a couple of pins in and I could always see the mark as it appeared raised. 😊
Good luck with the hll skins as I found it the most testing part of the build
Good luck with the hll skins as I found it the most testing part of the build
Roger Linsell
Hull skin pins
I have just started putting the hull skins on the Sea Queen.
I have tried to do It without using too many pins.
Do I take the pins out and fill the holes after or do I use a punch to get the pins In low then put a scrape of filler over the top.
I have tried to do It without using too many pins.
Do I take the pins out and fill the holes after or do I use a punch to get the pins In low then put a scrape of filler over the top.
Liked by
Loading…