Modav Fairey Huntsman
@AlessandroSPQR thanks Alessandro, yes, good to get some advice from experienced builders.
Those pictures are really useful. One of the hardest parts is the hull, so good to see that has been largely done - some P38 car body filler will tidy up the bow - I had to resort to slitting the ply as well to get it to bend! So the roofs to make and fit with the fiddly/tricky bits at the end being the cockpit screen and the pulpit rail, though some folks leave the latter off!
And good to see you have the drawing and instructions as they are pretty rare now and it was only the Modav version that got the drawings. And the rest of the kit really as quite often you might only get the part built model and nothing else.
So good news is that you won't need a lot of tools to finish it off and obviously some glues and paint. Prop shaft and RC equipment also needs to go in of course.
I'm tied up for the next week so won't be able to help much until after then but there are plenty of experienced guys on here who will help.
Chris
And good to see you have the drawing and instructions as they are pretty rare now and it was only the Modav version that got the drawings. And the rest of the kit really as quite often you might only get the part built model and nothing else.
So good news is that you won't need a lot of tools to finish it off and obviously some glues and paint. Prop shaft and RC equipment also needs to go in of course.
I'm tied up for the next week so won't be able to help much until after then but there are plenty of experienced guys on here who will help.
Chris
Scratch building 7 Faireys at a scale of 1:12 and also have 2 built by Dave Milbourn
Liked by AlessandroSPQR
@Jimbo09
You're welcome, Jimbo.
There's no need to worry about asking questions; personally, I don't believe there are any stupid questions.
Questions and inquiries are the lifeblood of the forum.
You're in luck, because both Chris and Bob have seen your query; when it comes to your ship model, I think they are among the most qualified and knowledgeable people to give you answers. In short, you're in good hands.
I don't think I can be of much help—at least for now—but I'll be following the progress with interest, as it will surely be useful to me as well. Good luck with the work and have fun with your ship model, Jimbo.
You're welcome, Jimbo.
There's no need to worry about asking questions; personally, I don't believe there are any stupid questions.
Questions and inquiries are the lifeblood of the forum.
You're in luck, because both Chris and Bob have seen your query; when it comes to your ship model, I think they are among the most qualified and knowledgeable people to give you answers. In short, you're in good hands.
I don't think I can be of much help—at least for now—but I'll be following the progress with interest, as it will surely be useful to me as well. Good luck with the work and have fun with your ship model, Jimbo.
Hi Jimbo,
Welcome to the forum, I hope you enjoy your time here and find it as helpful as I have done since I joined it.
The 34” Precedent Huntsman 31 model that you are looking at is exactly the same kit that I have, with the same box lid etc, but mine is the one that came with a glass fibre hull.
Precedent made this kit in two sizes and both could be bought with a glass fibre hull or as a conventional wooden kit, but other than the hull material they are identical.
You will not need too many basic hand tools to finish the wooden kit, and most of them are the sort of tools that most households would have in any case.
My friend is currently building his first r/c model boat from an Aerokits Sea Commander kit, and he is doing it in his caravan with a very basic set of tool whilst suffering eye problems.
He is making good progress, but more importantly - he is enjoying the experience and looking forward to getting his boat on the water later this year.
Your experience with r/c model cars will be very helpful and the transition to working in wood is not anything to fear - but it is different, and sharing any problems that you should encounter on here will give you all the help you need to overcome them all.
Bob.
Welcome to the forum, I hope you enjoy your time here and find it as helpful as I have done since I joined it.
The 34” Precedent Huntsman 31 model that you are looking at is exactly the same kit that I have, with the same box lid etc, but mine is the one that came with a glass fibre hull.
Precedent made this kit in two sizes and both could be bought with a glass fibre hull or as a conventional wooden kit, but other than the hull material they are identical.
You will not need too many basic hand tools to finish the wooden kit, and most of them are the sort of tools that most households would have in any case.
My friend is currently building his first r/c model boat from an Aerokits Sea Commander kit, and he is doing it in his caravan with a very basic set of tool whilst suffering eye problems.
He is making good progress, but more importantly - he is enjoying the experience and looking forward to getting his boat on the water later this year.
Your experience with r/c model cars will be very helpful and the transition to working in wood is not anything to fear - but it is different, and sharing any problems that you should encounter on here will give you all the help you need to overcome them all.
Bob.
Never too old to learn
Liked by AlessandroSPQR
@AlessandroSPQR thanks Alessandro, so refreshing to join a forum with polite friendly people who don’t shoot you down for being a newbie asking stupid questions!
Liked by AlessandroSPQR and ChrisF
@ChrisF thanks for the quick reply Chris. It’s the 34” one. I’ve attached photos. Hard to say whether I’d build others, this is one of my favourite boats so it’s more about that than future products really. I’ve attached some photos from the listing. Many thanks!
Liked by ColinJ2 and AlessandroSPQR and
Welcome to the forum Jimbo. Modav produced the original Fairey Huntsman 31 kits which later became Precedent etc. before manufacture of the kits ceased. These were available in 34" and 47" with the later size now being available from SLEC with some slight modifications - what length is yours?
Reason I mention this is that many of the kits, mainly Precedent, have been built over the years, so there is plenty of information available. I haven't actually built one myself as my version is slightly smaller at a scale of 1:12/31".
As regards tools that is a bit of a tricky one! Depends to some extent on how much and what work is still required and what you want to invest in the hobby? If only doing one model boat it can get a bit expensive buying a range of tools but if used on a number of different models then it becomes much more cost effective.
It would be a good idea if you could post some photos of the model and then we can help with tools and materials etc. There is a thread on here listing the tools etc. that are useful/essential in this hobby but it is a long list and as I said not cost effective for one build.
Chris
Reason I mention this is that many of the kits, mainly Precedent, have been built over the years, so there is plenty of information available. I haven't actually built one myself as my version is slightly smaller at a scale of 1:12/31".
As regards tools that is a bit of a tricky one! Depends to some extent on how much and what work is still required and what you want to invest in the hobby? If only doing one model boat it can get a bit expensive buying a range of tools but if used on a number of different models then it becomes much more cost effective.
It would be a good idea if you could post some photos of the model and then we can help with tools and materials etc. There is a thread on here listing the tools etc. that are useful/essential in this hobby but it is a long list and as I said not cost effective for one build.
Chris
Scratch building 7 Faireys at a scale of 1:12 and also have 2 built by Dave Milbourn
Liked by AlessandroSPQR
Modav Fairey Huntsman
Hi, I’m thinking of buying a partially built Modav Freeman 31 model. I’ve built several model cars of varying difficulty but have never built anything made of wood. Has anyone done a similar build or better still, have any experience of this specific build? I’m wondering what I need by way of tools, any advice, pitfalls etc. any advice would be extremely welcome! Thanks
Liked by ColinJ2 and AlessandroSPQR
Liked by
Loading…