I am making a Riva boat from scratch. Just a set of plans. Where can I get the accessories to go on this boat . it's 32inches long by 9inches wide.I found the advice from one of your members just now of several coats of varnish very useful.

I completed the Dumas 36" CHRISCraft several years ago. I made sure all of wood planking was completely smooth and minus all dents. I covered the model in 5 oz. fiberglass cloth and cover it with resin/Hardener. The planking immediately shine out. I then did a light sanding and gave it one more coat of resin/hardener. When dried I put some auto wax on it. You can purchase this material in marine stores or a good hardware store.
My father and i did this a long time ago a real 22 foot ChrisCraft barrel .
We did a small corner of the boat first, you can do the same on the model. We did fiberglass the whole boat so that we didn't have to soak the boat at beginning of the summer

Any good Spar varnish will work just give it about 7 coats with sanding in between coats with fine paper