Sea Queen aka MALLARD
I built it from a kit a few years back sold it then bought it back to do a refit & new paint job
MFA 850 torpedo Motor 3 blade brass prop it runs on a 12v Battery it is now with my nephews son in Northallerton

more pictures with the sail decal attached
thanks to Tom 😉

scratchbuilt from ply and balsa wood powered by two Caldercraft 750 motors to 40mm props only took about three months to build as a winter project its not perfect but was never meant to be more than a toy, 54 inches long and gives a good response in speed and handling

Got my 3rd build finished its a Northumbrian Coble, looking forward to put it on the lake at QE2 park Ashington

Built from a plan in 'Model Boats' in the 80's with a balsa hull and ply decking. Powered by a single cylinder 'Unit Steam Engine' from the same era, and a meths fired boiler. Only recently has radio control been added.

This is my M.F.A Tracker . When originally purchased it had the large and heavy 850 motors in it and old electronics , after a close call with a fire on board I decided to refit her out with modern Brushless motors and over rated Escs powered by Lipo's . Works out a 1/3 rd the weight 3 times the speed and run time over an hour . So a great result

Oh yes , sound effects donated by nearby Tug 😊

33" Dumas kit of the PT109. Not very stable boat with little freeboard it doesn't inspire confidence at speed. 😭

Joysway Bullet Brushless RTR Deep Vee

Water cooled 2815 Outrunner brushless motor. 50A water cooled brushless ESC
Top speed: 45 km/h. Powerful 37g rudder servo. CNC aluminium alloy rudder. Shaft drive system: 3mm flex cable drive. Twin blade nylon propeller.
Length: 740mm (29.13"). Beam: 180mm (7.09"). Weight: 1140g (2.51lb) (Model only).
Hull materials: ABS injection moulding
Get about 35 minutes out of a 11.1 v 2200 mah lipo
But most of all good fun 😊

This model took me 3 years. Copper plated the hull panel by panel. Even found a crew for her, then added an RC and took her to the lake.
She sailed well, but my enthusiasm to leave the gun ports open cost me dear. The water got in the hull and knocked out the RC, leaving her listing and drifting some way from shore.
Salvation came in the shape of a 10 year son of a friend, who strip to his underwear and swam out to rescue her!
Now she sits retired in a glass case.

I found the basic boat, a Keil Kraft Sea Rover, in an old second hand shop some years ago, and decided to put her back together. Couldn't resist adding some figures to the deck, even a pair of binoculars.
I added a RC motor and took her to a nearby boating lake. Used a couple of times before retiring to the loft for the last 10 years.
Recently took her out and after a bit of polish and oil for the pro shaft, she's running well.
My question is, does anyone know what's she's worth?

here is my new addition to my fleet that I now sale in Staffordshire

this is my latest purchase a member of Tynemouth yachting club had it on e bay I have been after one for a while now the fun begins I will try & get a video of it on my attempt to sail it