Where do you sail your boat?... Where you can get the best pictures.
1/36 scale LA Fireboat #2 challenges the Portland Fire Bureau's 1927 fire boat, David Campbell, at the Portland Maritime Heritage Festival 2008.
We Lost...New pumps for next year though. - - - 1/36 scale model uses twin graupner voith schneider drives, and twin ESC. Main power is 12volts for the drives, and auxillary pump, and one 6v for the main monitor pump.

The boat is scratch built,designed by Hal Harrison,contruction plan in Marine Modeling mag.whitch was designed as a freelance coastguard patrol boat .made from balsa/cardboard sise 18" aprox.weight 2.5kg.
Our model is 36"twin motors and all moving parts and weight is 10kg.
This is the latest pictures of Vigilant Star on the lake at NewBrighton Wirral

This is my latest project, bought for spares, but I wanted a challenge, so I'm putting her back to how she should look. She's a old one I do not know the make but she is of a equivalent size to my other Fire Floats...
Any info appreciated..
Have added a photo of rudder set up any comments??

She's getting ready now, will keep updating as work progresses.

this model has been extended by 2 inches for better handling looks the part powered by a single Graupner speed 600 on 8.4 volts built from liteply weighs 4 pounds all up,built 2004 and sails at the Goole club waters near the coal hoist ,Goole docks (saturday afternoons)

Rescued from e-bay.
Decaperm, MonoPerm motor ? was wired for 6 V but very slow so have fitte a Viper Marine ESC and wired for 12 V - not sure if it would take 18 V - any advice would be appreciated.

As no pond near Camberley I boat Sunday mornings at the Stoke Park pond, Guildford. Not a large pond but great for scale and small to medium speed boating.

Second picture of a Skimmer scratch building (plans from Model Boats magazine Sep 2007) - work in progress.

this model was from the sixtys just got the hull and cabin
the cabin has been wired 12v it has an m f a 850 motor which
is water cooled just been tried once the speed controller
failed so try again ? will update as I go along

Of all the data files on the Crash Boat I have not ever seen any details/ drwgs for the vehicle specifically used to transport the Crash Boat types ( Ie the British Power Boat co ) had transporters for their craft. Anyway I enclose a picture of the OFFICIAL English designed TRANSPORTER vehicle for the Crash Boat and a photo of verification as modelled by Peter Dimberline. I have kept my model stock standard, still have the original plastic red Graupener prop of old I think it is a 30 with a nick or two. Soft copper brake tubing pipe (1/8 I/d) is only around the head and one of the inline exhaust resonators has a water tube outer casing to cool the exhaust piping and inner tube gas temperature which takes out the energy/heat of the exhaust gas and dramatically reduces noise. Hope my hints help .All the best Lyle.

More of the Crash boat at our sea water creek and of Peter Dimberline taking a rest after an exhausting day at the radio sticks steering the model. After all, I only did the car loading, driving to the site, carrying fueling and starting, entry to the water and launching and taking the model out of the pond , cleaning and refueling etc to go again. You can see Peter is getting his stamina back. I only ever used 3;1 fuel and in later years 4;1 fuel, just how fast do you want to go? and I have defeated that(annoying) high whine of model engines with my muffler system. Needle valve is left alone and two or three clicks turn out/in in Summer or Winter is of no consequence, maybe too many fiddlers with model engines breaks down reliability? I usually wind the plug out 1 to 2 turns and start her dry and with one or two turns (electric starter belt now) of the flywheel and a fraction choke she STARTS at a bit above idle setting on carby , then throttle to idle disconnect plug lead and then screw in glo plug and lift model casually to pond and slowly place in water at IDLE. Just a bit of a mild throttle check / rudder function check, water outlet check, LOOK AHEAD and if safe clear release and gently open up.

Some 25 to 30 years ago I wrote to Peter Dimberlins for details of the Crash Boat following a mention of him in 'Model Boats '. Peter supplied me with data and we have been so close ever since. These and more Images are of Peter at the helm of my Steam boat' Lady Halina ' and his successfully (ha ha) steering my Crash Boat as I did not know it was so fast/ ballistic. More pictures to follow of this gracious man at the helm at our pond/ tidal creek during his momentus visit to OZ in early 2008. My model is some 30 years young and is with the third engine as the others were worn out with use ( OS35, ENYA35 now a S/C 40 a bit too much) in a 25 pound plus model, yes she is heavy. She has been re done over and over(paint resin paint resin etc) and only had the 1/8 inch steel prop shaft (yes 1/8) replaced recently. I have a "leather flange coupling"as on all my power boats and never let me down and vibration free. Exhaust system 1:muffler to a 2.tar lined tin can to a 3.small resonator (equals quiet ) More to come of my Crash Boat as a result of this gracious man and his service to modelling even to a colonial.

Model Aerokits Fire Tender built up over the last few years. (You may have seen the "Find Bob" competition on this site and incase your wondering, Bob is the character operating the water monitor!

For more useless information you may be interested to know how he got his name? To get straight to the point his head is spring loaded!

This is one of the old aerokits models, it was only partly built when I had it at first (the hull only) but four years on and it works great. The added features are a water pump, which, yes is most definitely more fun! Also a horn from action kit, some say they are not as good as jjc-electronics, but in my experience it is great, I have also added L.E.D. lights shown here and the latest addition is the voice box (as I call it), great fun.

Name of the Boat is the OCEANIC. This boat was in my friends garage for 18 years, when I was given it, it needed some T.L.C. the kit from what I can gather was late 60s.

I had to send a way to Germany to get the plans so I could refurbish it, and some of the bits I had to make myself. it is powered by twin monoperm super 5 motors. it has rotating radar, working mast lights, and bow thrusters. Sailed at Cheddar Steam Modals lake.