complete scratch built on a glass fibre hull here are a few more photos to show the progress that has been made still a lot of work to do boat powered by a540 motor driving a 60mm 3 bladed prop I sail at pickie pool in bangor co down Robert waterson angus

Lorraine B my first attempt Sein Netter the hull was bought from NPC Plastics Blackpool then scratch built, My second attempt Steam drifter Meldia hull from NPC and scratch built from Photos, Busy at the moment with a Northumbrian Coble.

Scratch built. 1:16 Scale. All data researched from internet.
3D CAD modeled.
IC 16M is a swedish 15.9m. Aluminum Coast Guard Boat driven by 2 800HP Jet'Drives. Max. Speed 50 Knots. Builder: Dockstavarvet.
Model constructed of all glued ABS 1.524mm (0.060") sheets. Deck details under construction.
Powered with two 28mm. Kehrer Jet Drives. 2 Swang Hobby 1200 KV brushless motors 2 90A Seaking ESC 5S / 18.5V - 25C -5000 maH LiPo Hyperion Battery.
Weight included 1 Bat 4300 gr.
Running at Mazenod Road Pond, Winnipeg, Manitoba, Canada. Oct 19th -2014
Jagged video because of stabilized feature from Youtube.

Launch day at Needham Market lake . Great turn out for a great boat , weather was kind 😊

My sport boat Kika, see elsewhere on the site now has a friend! I've created a Skier (Chopped & Shaped Soldier figure ) put him on skis and got a passable attempt at model water ski-ing.
Doesn't much like going astern though!
Chris

This was the 1-35 scale plastic model kit and converted to RC 3 props 2 working port and the starboard the centre is non running. Due to weight I used a 11.7 lipoly battery so it's fast but the running time is only about 20 30 mins
It won best in show in the navy boat section at our club due to the detail and the figures so can't be bad

Kingston mouldings hull will post more pictures as I progress
two more pictures with the sails on they need the running lines to the drum winch then it will be ready to sail

with the paint job done just waiting for the new sails mast & booms then just a case of rigging up and down to the lake for her maiden voyage

Custom made rotating radar & gun director, flashing LED spot/signal lights, smoke system, RAM sound system "WHOOPER", RAM Bilge pump. Two guns are set to follow the gun director.

This model of a German North Sea FishingTrawler was built from a Graupner kit in January 1974. The crew are South American, the dog Welsh the owner English and her home port is Maldon. She is powered by a 6volt 400 motor coupled with a Viper 15amp controller and my Spectrum radio outfit. The 6volt 10 amp gel cell also acts as ballast.

Hey Mates,
This is my first attempt at stick building a boat. it's a DUMAS (model 1203) 33" 1:16 scale Coast Guard lifeboat. Am learning OTJ (on the job)....
The kit is approx 6-7 years old found it on EBAY for $77 USD. Nice wintertime project.
Happy Trails.....

R6M yacht the hull was built from plan by a friend he is building a new R6M Called Romanza I was lucky enough to get this from him it will be getting a coat of paint after I have finish the undercoat and making sure the fin box is completely sealed the new masts & fittings on order from
PJ Wiles hopefully it will be ready for the spring