Launch at last of Coromandel at Cleevedon last week with the help of a passing Portishead/Cleevedon club member who steered the ship, whilst I somewhat did my best with a video camera, I will have to get in a bit more practice.

With the noise from the meccano step down gears it gave a satisfying Impression. I do not expect that it will get sailed much, as it has ended up much more of a display model than something to expose to the sort of water we have around here.

Nasraf

Vintage Model Boat Company Sea Breeze electric powered model with a small brushless motor. This is a laser cut reproduction kit produced to a very high standerd. please take a look at a new club coming soon at
http://froggyt996.wix.com/vintage-model-power-boat also take a look at www.vintagemodelboats.com
Thanks to John Lockett for the Video

Vintage Model Boat Company Sea Scout electric powered model. This is a laser cut reproduction kit produced to a very high standerd. please take a look at a new club coming soon at
http://froggyt996.wix.com/vintage-model-power-boat. also take a look at www.vintagemodelboats.com

Thanks to John Lockett for the Video

Photo taken at Portishead on 1st July by a friend in my club many thanks to Les Masterton for allowing me to add to my album. Model running on a Johnson 600 with 3:1 reduction gearbox 45mm 3 Blade brass prop and 11.1 Volt Lipo. Not bad for a model designed in 1952. 😊

Not your typical submarine but certainly an unusual semI submersible. Scratch built by fellow club member Brian Clewes this is a most striking looking vessel. Fiberglass hull and moulded perspex window. Home built waterjet uses a large 900 (I think) brushed motor, water cooled speed controller and 14.4v LiPo. Looks really spectacular on the water and Brian is working on the ballast to enable the model to remain just submerged. Video to follow in due course.

One of our newest club members has just purchased this model, "as is" sold by original builder, have to say the builder certanly made a nice job of it.

Have been resurrecting this old 34 1/2" FIREBOAT which was originally built in 1958 from an aerokits kit, for the last 12 months. Went for first sail at Cwmbran on Wednesday, and I am pleased to say it performed very well, But needs a little tweeking to get balance right as she sits a little low at the bow. Having been given some great advice by the local club members, I will be moving the motor and mount further back, and reducing size of prop as it used too much power. But still I'm happy with the performance and the fact it didn't leek. Will update as soon as I've done the mods.

ADDED WRONG VIDEO CLIP !

this is actually a good old "shovel nose" boat still under construction by a fellow club member and was its first sea trial.

Model Slipways 1/32 scale harbour tug kit built late summer/autumn 2011. Powered by MFA 2.5:1 geared motors running on 6 volts and powered through an Action P94 Mixer/speed controller to provide great steering performance -- easily turns on it own axis. Sails mostly at Knightcote Model Boat club

Model Slipways kit with fire monitors and bow thrusters. Powered by 2 x MFA 2.5 : 1 motors on 6 volts via Action P94 mixer ESCs. Sails mostly at Tynemouth model Boat Club

Here is my scratch built Seaplane Tender in !/12 th scale. it is powered by 2 x 250 watt brushless motors running on 7.2 volt Nmih batteries. Pictured here at Knightcote Model Boat Club in Warwickshire and a couple during construction.

HI Fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built from a Caldercraft Kit, This model came into my possession for the price of 20p, a raffle prize at Bryn Bach Model Clubs OPen Day 2010, when it was built is unknown. The item being made for display use and not finished off, no internal electronic fixtures. Did have a prop shaft and prop that had not been fitted correctly. 50% of all the fixtures had to be removed and refitted before they fell off, some didn't stay in place from the show back home. The model was finised off using a photo of the Milford star on the internet. The fish boxes and figures being obtained off DON one of the Society members who had a mould to make them in white metal, only required cleaning up and finishing off. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic on the water,a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The drive motor is a 550 with the lowest revs I had in MJB's this was married up to a 2.5/1 gearbox I also had in stock. The main motor and steam unit are supplied from a 7.2 volt nicad racing pack. This model has had meny fishing trips on Cwmbran Boating Lake and at shows the Society visit. Hope you enjoy the pictures, Regards GreyWolf.