More "Wee Nips" - trying my new modified Wee Nip , rudder only with deck mounted equipment box.

Model Slipway Model - "Maggie M" is a Fishing Trawler
Scale 1:32 L. 850 mm B. 255 mm Approx. 10 kg.
Built in 1990 by Campbelltown Shipbuilders Ltd (Scotland) MAGGIE M operates out of Scarborough harbour in Yorkshire, United Kingdom. The vessel is designed for twin-rig trawling and the aluminium shelter-deck is a cover over the fish processing room.

In case you have a smoke device using these or any smoker you can fill remotely by this method. Just used a reservoir and (for the purpose of the test) a 6v water pump running as slowly as possible. Pump sucks fluid through the smoke tank from the reservoir and recirculates it back to same. Reservoir fluid level needs to be level with, or below the smoke tank inlets to avoid siphoning to the tank and flooding the wick. With this system it only takes a few seconds to fill. You could also use the same idea manually with a deck filler and overflow. Either system must be sealed (airtight) to avoid fluid draining from tank when not in use, ( Manual system - both tubes plugged after filling) This idea does away with disassembling E-pen to fill .
JB

Crew posting to Tug, still in dry dock and more crew to be completed and fixed to deck, limited room, but at least 2 more to go......still to be maidened, happy with subtle weathering....not over the top...fender soaked in some tea bags for a week....satisfactory end result...

This is my latest build and first time at scratch building. Other than the hull I've done everything else so far and learned a great deal in scratch building. The hull was built for me by John Elsy of Newcastle as I had no experience of lifting details from the basic layout plan I had, but will learn this soon. Various stages in the build to date. it has a Graupner 500 ECKO motor pulley drive. Motor sits above the propshaft on special engine mount and the shaft has an oiler. 2 ch Futaba `T2ER 40 MHz radio which is all hidden under the false planked aft working deck. it will run on a 12v 7amp gell cell battery with a FR30HX Electronize ESC. Currently building one of the cranes.

H.Martin Stevenson

Foredeck Detail.
Anyone looking for details of Hood's foredeck equipment can't do much better than this photo I just stumbled across👍 While looking for something completely different of course🙄
Doug

Here are pictures of HMS Exeter - I built her over a period of time plank on frame hull, covered in styrene to simulate plating on the hull. The deck is all planked with individual planks - the guns are fully rotating and elevating but not firing :-).

John

This is a 1984 re-issue of a Lindberg Chris Craft Sport fishermen purchased used on Ebay. Some of the parts where broken and some partially assembled. The model did come with 2 MACK RC motors and some fabricated wood parts, including a template for the aft deck. The interior was assembled from quarter scale doll house items except for the dinette. There are 4 underwater LED bulbs with a dedicated power supply. The running, interior and radar unit are powered by a separate systems from the hull electrics. The second Li-po battery is for backup and balast. There are number of additional items added since these photos were taken including a stern seat and larger radar array .

Here's my current project. This is an upgrade of an old model. I retained the hull from a German-made kit from the firm Krick (model "Lisa M") and re-made the upper deck and cabin using 3mm thick ABS plastic to resemble an American type "Down East" type boat. Here is on its sea trial past weekend and during its first light system test.

Hello !
Som more Pictures of my Fairmount Alpine , A little bit forward on the deck
propshaft and rudder is mounted
the towing winch is mounted and working
more
pictures is comming

// Have a nice weekend
all boat builders 👍

I bought the Moorcock from a fellow boater and decided to rebuild her as the Moorcock. The hull was stripped bare and the prop-shaft tube removed and completely remade with a new prop. The hull was then repainted and the life boat and davits added The superstructure was cleaned up and remade with a Robbe spring loaded grappling iron added to the rear deck.She is powered by a 24v scooted motor salvaged from a garbage bin and has 4 x 12v 7amh SLA's to provide power. She is a good strong vesel to sail and is often used as a recovery tug.

Checking for size comparison and scale! The barge is 50 inches long by 12 inches beam, will draw 2 inches light and 6 inches loaded. I plan on making it an oil tank barge with a swiveling boom and two deck houses aft for the pump engine and housing for crew.