Hi Ned, Welcome aboard 👍
On my Sea Scout (little brother of the Sea Queen) I used silicon sealant (a la bathroom!) and a small brass screw in each corner. it had to be good cos I had the RX, RX battery and rudder servo tucked in there!
My boat was also started by Dad in the sixties. He had it free running with a Taycol Target and wet (very!) 6V lead acid cells. I upgraded to RC and Decaperm motor about 25 years ago and am currently restoring and converting to brushless 😲
Happy boating, Cheers Doug 😎

Wow great bit of video, she performs very well on the water and turns seem to be very stable. Nice one. I have a Sea Queen I have got to renovate. What motor are you running in her please.

Scale models are the only way to see in 3 dimensions how long-gone vessels looked, so it's great to see a unique model that represents this class of vessels.

And great to have it showing its paces.

Well done.

Great job of restoration! it's a fantastic model.regardless of type.

Still sailing on the Orwell. Great to see

Really fine looking model. The detail really adds to the finished model.
Glad to hear you have chosen to go for smaller motors and props. The weight saving will really have improved the performance, and LiPos will make it sparkle. if your ESC(s) do not have some sort of cut off for low volts I suggest you fit a warning device to the LiPo to prevent over discharge.
Be good to see the model running on the water!
Dave 😀

Indeed Dave, charger, batteries, alarms and charging bag on order!!

Sadly although my ESC's (tamiya TBLE02's) are Lipo compatible research says their cut off limit may be too low so fitting the alarms too as a fail safe.

hoping to get some video once its running consistently.

The RNLI built 13 of these(under license) as the Waveney class, starting in the early 1960's. When the boats got to be "long in the tooth" they found home ports in different countries around the globe that were starting up new life saving organizations. Some of the boats are 50 years old.

BRAVO ZULU! VERY WELL DONE, SIR. As a USCG Veteran, I am pleased to see these MLB's recreated in scale. if she's watertight, you can roll her in the
surf and the boat should self-right. I have an older Billing Boats 1:20 that in theory is ready for heavy surf, but haven't tested her yet. I have seen video, though that confirms it.
YES, MR. ARNOLD PALMER WAS A US COAST GUARDSMAN, YM3, 1950-53
HAVE A SAFE RC BOATING DAY!

Mate , lovely to hear , I felt a bit poorly somewhat going at you as over the top, which was unwarranted. I ran my vessel the last two weekends with my mates at the Lake Illawarra channel ( see google maps?) South of Wollongong New South Wales Australia. Well we are just a bunch of old boaties , sick of clubs and fights and restrictions/ rules/ flat earthers. We have a lot of public look at us and the Council Ranger and staff lookeee see at times , but AS we are in zone of the Lake Channel HiGH/ LOW tidal mark any authorities do not want to know us. Here in OZ you can still boat as we have a lack of ponds in the land (not like your WW2 type ponds built in villages for water for vehicle fire tenders from FIRE and bombing raids). We have extensions on household insurance in OZ to cover liability and we tell any noisy race/race boat types to ".... off". We sail 1 meters etc thames barge, steam and electric and i/c and all big stuff we ALL run together on the water on the "pond", old sets 27 40 and 2.4 gig. And I spelt Peter Dimberline incorrectly with a T , so he will find out and knuckle me!! I do clean the engine bay with motor car degreaser spray and the decks cabin etc with household Kitchen cleaner and paper wipes. Such is good old Dulux house paint over the years. Fold down f'wrd mast , crane sits in a brass tube at the port engine bay ,rear mast sits on a peg at stern, rear stbd hatch opens, ALL to avoid knocks breakages of bits and over the years I have actually cast alloy bits in plaster-moulds and screwed down with brass. Just a standard red plastic graupner 40 mm prop (4mm thread?) this motor is a SC china copy ? of a OS40 I think , I just run her at the first plane to look nice, no rev head stuff as not necessary, wide turns, but goes so well in 2 inch to 4 inch chop no pounding/ bone shaking during winter runs as it HAS to perform SCALE on the pond rather than toy boat behaviour such as dig in and flick turns and she is heavy to handle waves! Just standard home made fuel 4 to 1 and my mates talked me out of Castor, so now I use synthetic lube . We share all things. Too much talkie . All the best and just fly out to join us good weather too .

Hi Lyle:

Very good point about your model performing to scale with wide turns and just rising up on the plane as it looks far more realistic .

Sorry Build Blogs will find it.

BRAVO ZULU! WELL DONE. The USCG 44' Motor Lifeboat was my first RC endeavor as well, in 1989. My latest is a Barracuda RC Boats 1:12 USCG 52' Type F Wooden Motor Lifeboat. Can't wait for 2018 navigation season!
HAVE A SAFE RC BOATING DAY
FAIR WINDS & FOLLOWING SEAS
GOD BLESS AMERICA!