This is my Catboat (alternate spelling: cat boat).
I made this for my son to have on his house.
When I bought this old model from EBay for little money but took me lots of hours to turn it the way it looks.
Is a sailboat with a single sail on a single mast set well forward in the bow of a very beamy and (usually) shallow draft hull. Typically they are gaff rigged, though Bermuda rig is also used. Most are fitted with a centreboard, although some have a keel.
The hull can be 12 to 40 feet long with a beam half as wide as the hull length at the waterline.
The type is mainly found on that part of the Eastern seaboard of the USA from New Jersey to Massachusetts.
This model is a Laughing Whale kit I found on EBay. I made it for the wife because she want it to have a “Coastal motif” in our entertainment room.
Again I really hope is to your liking.
In these pictures you can see the sewing machine I bought so I could sew my own sails.
Here is pitcure of both my boats sailing on a boating lake not far from my home, the larger of the two was commandeered by my 8 year old son for a trainning mission he had in mind, which gave me an excuse to build another one, which is the smaller boat the picture, as the young captain needed escorting while getting use to his new command!
They are both made from balsa wood, which the material for the hull, it is sealed with a acrylic varnish,painted over the top with enammel paint with clear varnish on top of the paint! The superstructure on the larger destoyer is made from thin plywood, and on the smaller frigate its made of plasticard!
I got the lynx helicoptors on Ebay from "The Dorest Print Man" I think it was, which are 3D printed by him!
HMS Solebay was a Battle-class destroyer of the Royal Navy. She was named after the Battle of Solebay which took place in 1672 between an Anglo-French force and the Dutch Navy during the Third Anglo-Dutch War. Solebay was built by R. & W. Hawthorn, Leslie & Company Limited on the Tyne. She was launched on 22 February 1944 and commissioned on 25 September 1945.
Music - "Deepblue" from bensound
This is a 1984 re-issue of a Lindberg Chris Craft Sport fishermen purchased used on Ebay. Some of the parts where broken and some partially assembled. The model did come with 2 MACK RC motors and some fabricated wood parts, including a template for the aft deck. The interior was assembled from quarter scale doll house items except for the dinette. There are 4 underwater LED bulbs with a dedicated power supply. The running, interior and radar unit are powered by a separate systems from the hull electrics. The second Li-po battery is for backup and balast. There are number of additional items added since these photos were taken including a stern seat and larger radar array .
here is my 2nd Graupner Carina ( after the 1st one I just wanted to built another one and Ebay supplied - again- a 'barely started' set.
Taking apart the glued wooden parts was a bit of a challenge. However, the previous owner used cheap glue and all the parts could be dismounted without any damage.
(will post more pictures of the rebuilt )
Well I had one of these back in the early 1970,s been looking for years for another one must of been a rare boat. So I was surprised when this turned up on eBay last week. So I had to buy it, the seller did not mention that the engine a Merco 35 was locked solid and all the head bolts were missing and the whole inside of the boat was soaked in sticky castor oil exhaust residue, but this is how I like them loft fresh and not messed with. I don’t think it’s hardly been used, I managed to get the engine apart after heating it up with a blow lamp looks like it’s hardly been run but the liner got a fair bit of rust on it so not sure I can use it. The only thing to remove the sticky castor oil was 25% nitro fuel, the one I bought in the 70,s cost me £27 this wreck I bought in 2018 £70 but I will enjoy restoring it, this is the boat as how I got it and now with the engine out that was another nightmare 😁
Members might like to view my experimental solar powered "BOAT " More like an aircraft carrier !! No batteries carried even for the radio. Brushless motor running from 24 cells giving 12volts. Slightest shadow will stop it.The panel i made myself by buying individual solar cells from Ebay and soldering them up.The cells are sandwiched between glass which makes it quite heavy and next project will have no glass but the cells are VERY fragile.
I wanted to demonstrate that a vessel could move due to the power of the sun alone.Introducing a battery would confuse the issue and sceptical people would claim that it was the battery doing all the work !! Cheers
Zoom 1 (Interceptor) Mono boat.
Built from a Glassfibre hull, brought on Ebay for £35 the hull is a slim mono racing type with a self-righting side cabin it runs a 1400W 14V 2958 4200KV Brushless Motor and 29-S Water Cooling Jacket with additional air cooling fan.
I did not want to use a flexi drive as high maintenance and prone to failure so the shaft runs via two universal joint one at each end. the propeller is a 38mm copper alloy
The ESC is a 200W and water cooled the twin rudders supply separate water one for the motor and one for the ESC.
The rudder are positioned to reduce prop-walk and are hinged to prevent damage if you hit a object in the water and also for ride adjustment.
Turn fins and trim tabs for ride adjustment were provided by a spares kit for another boat. also foamed and added an inner sealed hatch, a rubber bump strip and safety loop.
It certainly looks like we are having notification problems again, First it was very few getting through and now we get 14 YES that is fourteen of the same.
Just fresh off the shipyard, this is my version of an American made Uniflite (firm died several years ago) "Salty Dog" 28. its name is a Puerto Rican slang for escapade. From the same firm who designed and made the legendary Vietnam War Patrol River Boat (PBR), this boat was part of Uniflite's recreational boats line. For this one, I utilized a fibreglass hull I found on Ebay and did the rest with Ethylene 2mm plastic sheets. it runs a 9.6v NiHm battery, a 30A Mtroniks controller, a 3-bladed 35mm M4 bronze propeller.
