HI This is a Celia, I think, it was a caldercraft kit but am not sure. it is running on a 545 motor at either 6volt or 7.2volt with a 35mm 3blade brass prop. its performance is about right for the scale and type of boat. it sails at the Lake used by the Cwmbran Club. I bought it last year at the Shepton Mallet Show.

Some of our club members [including myself] giving our boats a run on the club pool just after dark.
Boats included are : Fishing boats, trawler, Tug, Lifeboat, sports cruiser and patrol boat.

Appologies for the background noise, but thats the traffic on the M6 toll.

HI Fellow Modellers,
Another model from the RADMC fleet at the fleetshaven workshop and boat yard in Ponthir.This model was built from a Caldercraft Kit, This model came into my possession for the price of 20p, a raffle prize at Bryn Bach Model Clubs OPen Day 2010, when it was built is unknown. The item being made for display use and not finished off, no internal electronic fixtures. Did have a prop shaft and prop that had not been fitted correctly. 50% of all the fixtures had to be removed and refitted before they fell off, some didn't stay in place from the show back home. The model was finised off using a photo of the Milford star on the internet. The fish boxes and figures being obtained off DON one of the Society members who had a mould to make them in white metal, only required cleaning up and finishing off. A graupner 6 volt steam unit is fitted in the funnel and to make the boat a little more realistic on the water,a maplin steam sound system has been used to generate the sound of the engine. A simple mod allows the revs to be linked to the engine voltage. The drive motor is a 550 with the lowest revs I had in MJB's this was married up to a 2.5/1 gearbox I also had in stock. The main motor and steam unit are supplied from a 7.2 volt nicad racing pack. This model has had meny fishing trips on Cwmbran Boating Lake and at shows the Society visit. Hope you enjoy the pictures, Regards GreyWolf.

Lesro Sportsman kit, wood sports fishing boat 33'' in length, weight about 8lb. MFA 850 on 12v (10 NiMHcells 3.5ah) MTroniks 40amp esc, X50 prop. Built by Ian Gardner.
March 2010. I am now using 12 cells and a Graupner speed controller. I added watercooling too and the boat goes noticeably faster- but melted a fuse holder on first outing so I need to upgrade some of the wiring. There was also a bit of prop aerating on turns so might reduce the prop size.
The last photo is with increased voltage.

Fishing cruiser built from kit by Dumas- no longer available I believe. Powered by Graupner Speed 500 on 7.2 volts with MTroniks 15 amp ESC. Travels at brisk walking pace so not exciting, but nice to watch. Has a big boat feel even though only two feet long.
There's a video of Scoter on the water.