6ft loa, RC, scratch-built, grp hull. 10 yrs old.
Sold to private museum.
Am building my 3rd RC model of HMNZS Taranaki, Rothsey class frigate. Over past 40 years have built many RN - e.g.
Force H, Med., 1943, such as Illustrious, Sheffield etc.
Refer www.modelboats.co.uk January 2014 issue.

My main request is that I can establish somebody UK with
similar interest, despite my living NZ but unable to attend
your excdellent sights.

Guess most of you have heard of the Khetanna, Jabba The Hut's sail barge from Star Wars. I looked around on the net and to my big surprise, the search engines did not spit out radio controlled versions of this model. Which made me think, and then decide to built my own.
It is scratch build, based on a "scudder" hull, a design by Glenn G. I printed a few pictures of Khetanna from the net and used those for guidance in the process.
The superstructure is a combination of balsa and ply wood. in the Star Wars tradition, the boat is propelled by a jet propelled engine. To finish it off, a Lego version of Jabba was added for extra detail.
It was a fun and fast project to built, maybe a dozen or so evenings.
(scratch) building is my passion and only sail the boats with my son about once a month. We've got a pond near Newcastle (AUS) harbour which is pretty good (providing there's no weed in it) but the disadvantage of this pond is salt water, meaning a proper rinse of the models is needed after each sailing session. Recently we have moved our sailing sessions as well to the liberty pond in town. The model captures the audience, the vast majority recognize the Khetanna immediately.
Happy sailing.

Jeroen

This is a 30-inch static model of the trawler that had suffered damage and had most of the deck fittings missing when I got a hold of it.
It was 'de-constructed' by Victor Marcham of the Mablethorpe Model RC Boat Group. Being a static model, it had to be bored through to fit a propshaft, a motor and rudder, and had new decking, mast and working LED lights.
It has yet to be weighted so pond trials can begin.

Police (Scotland) 1.12 scale. made from a Semi-Kit by Models by Design, built 2014.
This is modelled from the interceptor42 range by Safehaven Marine. This is my first full build of a model, having only done restorations previously.
Model length is some 42 inch, beam of 12 inch. (106cm x 31cm)
Power is by twin E-Max BL2826 Brushless motors and 1, 80amp speed controller running on 2 NiMH 7.2 volts.
Fitted with Action electronics Police siren, and with detailed rotating blue lights and searchlights.
I sail this at Cold Knap Lake Barry Vale of Glamorgan, and I am the Founding member of the Vale Of Glamorgan Model Boat Club.
Also included is my Portland Pilot interceptor 42 which was the original prototype from Models by Design which I purchased and added lighting etc, this runs on Brushless motor running on 12Volt lead acid.
Visit our website at http://vgmbc.org/

This 1/12 scale model is based on the Aerokits Solent Class lifeboat. Over the past 5 months it has been under going a major refit. I originally built the boat about 35 years ago and got the "bug" again last September. I've done the best I can to make a silk purse out of a sows ear.

Its powered by two MFA Torpedo 800 electric motors. power comes from two lead acid batteries, each rated at 12v 7Ah. Control is provided by two Mtroniks Tio ESC. The twin spade rudders are linked to one servo. Each ESC has its own receiver. I found that one receiver, using a Y lead, could not continuesly keep the two ESC supplied with a signal and they kept going into Failsafe mode alternately. I got round it by binding two receivers to the one transmitter. Within the engine compartment is an automatic bilge pump. Two probes detect if/when the water level rises to a certain amount in the bilge and activates the pump.

The model has working radar scanner , navigation lights, search light and blue flashing light.

If you want to see the boat in action please go to my You Tube page at https://www.youtube.com/user/coljacktonvale

I found the basic boat, a Keil Kraft Sea Rover, in an old second hand shop some years ago, and decided to put her back together. Couldn't resist adding some figures to the deck, even a pair of binoculars.
I added a RC motor and took her to a nearby boating lake. Used a couple of times before retiring to the loft for the last 10 years.
Recently took her out and after a bit of polish and oil for the pro shaft, she's running well.
My question is, does anyone know what's she's worth?

Another loft find. Bought for £15 as a very delapidated static model. Converted for RC. Many new parts required and complete repaint from deck up. Up for sale as I have too many boats. Sorry you are to late the boat has been sold.

Designer: Vic Smeed

A 1:12 scale model of a Thorneycroft RAF launch, length 43in., beam 12.5in Suitable for 2.5cc upwards. Excellent for R/C. Completely detailed on two large sheets.
Myhobbystore uk. MM412

I built this Range Safty Launch two years ago and I am now changing the hull paintwork to also include a water line. I never got around to doing this for some reason.

Range Saftey Launch

I purchased the plans for this model after my late father passed away, he too was building this model but failed to finish it before he died. My father was an Ex RAF Patrol boat pilot, hence the design was appropriate. The plans (Two sheets) are really well presented and easy to use. Each of the sheets provide ample detail to construct the basic model and if you are an experienced builder then these should suffice. However, a little research may be required to put the final touches together for the completed model (If you are a perfectionist like me). These plans are suitable for a novice as a first time project. This being my first attempt at a scale model. The boat once completed sails really well. I fitted mine out with electric motors, speed controller etc and when on the water a few heads turned! Fantastic plans GO FOR IT! Roy McCluskey

Aquired as response to grandsons'Can't we have one like that' request on seeing other club members ' Hooligan boat'.
Cheap second hand commercial speed boat steered by shutting down port or starboard motors and only on/off on pretend transmitter.
Now modified with proper ESC, 2.4 radio with servo operated rudder and upgraded to take 8.4v NiCad.
Length: 30 inches_ Not yet sailed in modified form !

Scratch built. 1:16 Scale. All data researched from internet.
3D CAD modeled.
IC 16M is a swedish 15.9m. Aluminum Coast Guard Boat driven by 2 800HP Jet'Drives. Max. Speed 50 Knots. Builder: Dockstavarvet.
Model constructed of all glued ABS 1.524mm (0.060") sheets. Deck details under construction.
Powered with two 28mm. Kehrer Jet Drives. 2 Swang Hobby 1200 KV brushless motors 2 90A Seaking ESC 5S / 18.5V - 25C -5000 maH LiPo Hyperion Battery.
Weight included 1 Bat 4300 gr.
Running at Mazenod Road Pond, Winnipeg, Manitoba, Canada. Oct 19th -2014
Jagged video because of stabilized feature from Youtube.

This was the 1-35 scale plastic model kit and converted to RC 3 props 2 working port and the starboard the centre is non running. Due to weight I used a 11.7 lipoly battery so it's fast but the running time is only about 20 30 mins
It won best in show in the navy boat section at our club due to the detail and the figures so can't be bad

rc boat..........................................................................................................