I have just completed this model - just waiting for the new prop to arrive along with a flag for the main mast, plus handrail staunchions. it was a Precedent all wood kit and not too Impressed with the materials but you only get what you pay for. I have fitted a Graupner 700 Speed Turbo and a Torpedo 50 Amp ESC. I am powering it with 2 6 volt SLA's wired in series. Overall I think it has turned out not too bad and it seemed to get better the more I worked on it (or is that psychlogical)Tested in the Marine testing laboratory (white bath) and floats OK with no sign of a leak (fingers crossed). Our boating pond will be frozen over at the moment so no real testing can take place yet.
HI Dave
Yes, my ESC is a Tornado 50 Amp which is the same as my friend's one - in fact I bought it on his recommendation, however I usually use Mtroniks. Our motors are not the same but both have similar RPM at 12 volt. I have ordered 3 more props of varying sizes and pitch to see how it will perform - had I have seen my friend down the lake in the last few months since I have been building my Perkasa, I might have got the prop right to start with ! I don't think I will get a 'pass' to get down the lake before Christmas so hopefully it will not be too cold and freeze the lake again before I get a chance to try her out.
Alan
Down at the lake this morning. Boat is now complete with hand rails fitted and painted. 40MM 2-blade X type prop fitted and with the batteries moved back she went really well. The bow lifted well out of the water and got on the plane very easily - would not want or need to go any faster.
Alan
This is a 40" long model of a gas powered Berkley Company kit of a US Air Force crash boat from 1955. The plank on frame kit was in production for about 10 years and was meant to be powered by a model airplane gas motor with a single shaft. it depicts an experimental 50 knot rescue boat (painted in a peace time color scheme) during service with the USAF. if successfull it would have been put into production designed to be a replacement rescue craft for all Air Force 65' crash boats. Unfortunately for the crash boat program the Air Force lost interest as helicopters were become a reliable way of rescueing downed pilots along the coast. The prototype and a sister boat were scrapped, as was the entire program.
The model was given to me to be restored(top picture) for the son of a retired USAF veteran that was a crash boat crewman. The model was built in 1957 and had been run a few times on a tether line, R/C was pretty expensive back in the day. I stripped the hull, filled in all the cracks and rebuilt the mast. I added a small boat, davit, liferaft, coxswain station, spray shield and deck hardware among other things. Actually all the owner wanted was a paint job, he was very happy with it's new appearencep! Although I fiberglassed the wooden hull and made it watertight, the owner doesn't plan to run it, just a memorial to his dad's service. I really enjoyed working on this "rare bird".
Not Strictly Aerokits!!! Bought this and a Sea Breeze at the Warwick Show. Sea Breeze is in the cupboard for Xmas. Sea Nymph is Ivory and Brunswick Green. it has a JP 400 motor with an Mtroniks 15 amp esc powered by a 7.2v nicad. Currently it has a 35mm S prop. Haven't had a chance to try it out on the water yet. Maybe this weekend. its the first wooden boat I've ever built so am quite pleased with the outcome. Looking forward to the Sea Breeze as that's going to be my first brushless model.
Owing it's origin to the RNLI lifeboats of the 19th century, the US Coast Guard 36'MLB saw service from 1900 to 1987. The USCG built over 300 boats of this class in various "mods" spanning it's life history. Constructed of wood and fitted with a bronze keel it was powered by a 4 cylinder engine later modified with a diesel motor. Early powered 36' boats carried oars and sails as auxillary power. My 36500 model was based on the famous Chatham Lifeboat Station in Massachusetts, USA. On Febuary 18, 1952 the CG 36500 rescued the 32 survivors of the tanker PENDLETON during a night time nor'easter storm. Without radio or radar the Coast Guardsmen found the stricken T-2 tanker in the blizzard, taking the crew off one at a time. With each pass of the lifeboat a tanker crewman climbed down a rope ladder and "fell" into the lifeboat. With all on board, the 36500 found it's way back to Chatham harbor much to the delight of the towns people and the Coast Guard! The most amazing fact regarding this rescue was that the 36 footers were only designed to carry 19 people, including the 3 man CG crew, without capsizing.
The model was scratchbuilt of balsa strips and aircraft plywood, using official USCG blueprints. Powered by a 6 volt motor and a 2 channel radio, the Chatham lifeboat is pleasure to run in my local pond.
Thanks Mike, I must try balsa. Just now I'm using 3mm pine planks which take some clamping while the glue dries. Like you, I resin wash the finished hulls inside and out.Regards, Ian.
Built this year 2012 by Colin Burrows as a static model. Bought from him to make RC on 2.4. and currently fitted with a 600 motor that is too powerful, advise that was received from a fellow modeller, I am awaiting for a smaller unit to arrive to make it more authentic as it resembles a power boat rather than a trawler. Am also building a speed boat but have put out a request for wiring information as I have already blown up one speed controller!! lol.
I belong to a recently formed club sailing on the lake a Queens Park, Mablethorpe, Lincolnshire. New members would be most welcomed.
Realistic looking model. Low speed high tork motor would suit this. Model Motors Direct do a 555 which is excellent for most scale boats. What ESC are you using?
You can post details of your club in our Model Boat Clubs section, which should help any prospective members find you. 😀
Hi, I am using a Perkins 5510135 Marine 50amp esc and am awaiting a 25mm diam 300rmp motor from Hongkong to replace the Johnson 600 that is already fitted. it's a suck it and see job as I have no experience in the boating field my previous hobby was flying electric planes with lipo's and brushless motors. Going to fit proportional steam simulator, fog horn and whistle, have already fitted sound generator representing the 3 cylinder steam unit that would have been in the real thing. if you have any experience in the electronics field I would welcome help on esc requirement to power twin graupner 700BB Turbo motors.
Vintage Model Boat Company Sea Breeze electric powered model with a small brushless motor. This is a laser cut reproduction kit produced to a very high standerd. please take a look at a new club coming soon at http://froggyt996.wix.com/vintage-model-power-boat also take a look at www.vintagemodelboats.com
Thanks to John Lockett for the Video
Nice model, sailing very realistically in quite choppy waters. The brushless is powering well and with such a small model the weight saving must really help.
The lines are very clean and the kit is a credit to its producer and builder. 😀
Vintage Model Boat Company Sea Scout electric powered model. This is a laser cut reproduction kit produced to a very high standerd. please take a look at a new club coming soon at http://froggyt996.wix.com/vintage-model-power-boat. also take a look at www.vintagemodelboats.com
This model was originally scratch built in 1964 by my Dad as a 15th birthday present for me,the length over all is 60.5" with a beam of 17.5" and a theoretical draught of 3.5",not sure as to the actual design but it is meant to be 1/12th scale, it was originally powered by a 12 Volt windscreen wiper motor out of an old Mercedes car, and the radio gear was a home made system as well, but both are now well beyond repair and I am fitting an MFA 800 Motor with a Fusion Aquapower ESC rated at 125amp. run by a new 2.4 Ghz radio system.
When I get to sea trials stage I will send Update and possible video footage.This boat along with the rest of my harbour, will be on view at the Abbergavenny Steam Rally this weekend June 3rd and 4th(Sunday Monday) in the model section marquee.
Model Slipways 1/32 scale harbour tug kit built late summer/autumn 2011. Powered by MFA 2.5:1 geared motors running on 6 volts and powered through an Action P94 Mixer/speed controller to provide great steering performance -- easily turns on it own axis. Sails mostly at Knightcote Model Boat club
Model Slipways kit with fire monitors and bow thrusters. Powered by 2 x MFA 2.5 : 1 motors on 6 volts via Action P94 mixer ESCs. Sails mostly at Tynemouth model Boat Club
It is a "Model Slipway" Kit and is listed on their web site ( www.modelslipway.com ) as Yorkshireman as this was the sister tug. The basic kit costs about A£270 and running gear, bow thrusters, fire monitors and radio gear costs about another A£250. The kit is really for those with modelling experience as it has a few challenges for the inexperienced. Hope this helps
Here is my scratch built Seaplane Tender in !/12 th scale. it is powered by 2 x 250 watt brushless motors running on 7.2 volt Nmih batteries. Pictured here at Knightcote Model Boat Club in Warwickshire and a couple during construction.
I used the extremely good drawings in the plans sold on the model boats magazine shop web site. As you say, easily copies at staples so can even be used as a template when copied. Good luck with your project.
Many thanks, I prob have not researched enough at the start just wanted to crack on with something. Not even looked in a model magazine, though visited a few local clubs on sail day.
This is my 46 inch fireboat. it is a 1960s Aerokits model that I was given about 18 months ago only partly started (frames and stringers). it is powered by 2 x 770 watt brushless motors with 4s lips and has working monitors and an Action Noisy Thing sound system. it is pictured here at Tynemouth boating lake where I an a member to of the Tmbc.
I'll get some pictures when I next see it as it is kept at my Mums place in the NE where the lake at the Tynemouth club is big enough to take it given its speed and size. if you are blowing fuses, make sure you haven't over greased the shaft. I did that once and really only a light greasing of the inner shaft and some light oil on the bearings is all that is required. Also try a smaller prop. You may not get any reduction in Speer as the motor may rev faster and at lower amps. I've just taken the 50mm 3 blade brass props off mine and put 45mm 2 blade plastic racing props on and she runs faster and smoother. Hope this helps.
Yes, my ESC is a Tornado 50 Amp which is the same as my friend's one - in fact I bought it on his recommendation, however I usually use Mtroniks. Our motors are not the same but both have similar RPM at 12 volt. I have ordered 3 more props of varying sizes and pitch to see how it will perform - had I have seen my friend down the lake in the last few months since I have been building my Perkasa, I might have got the prop right to start with ! I don't think I will get a 'pass' to get down the lake before Christmas so hopefully it will not be too cold and freeze the lake again before I get a chance to try her out.
Alan
Alan