47" working Narrowboat. All wood construction but have fibreglassed below the waterline. Plenty of detail in the living quaters

Tortola at rear, Curlew in foreground.
Tortola plank (Balsa, tissued and dope) on frame, the keel and bulkheads from 10mm plywood. it has a small electric motor fitted but will have sails as well. Curlew from the Eezibuilt range. Material ply wood, Some of it from fruit crates.
The stand for Tortola made from 3 ply cardboard to my own design, stuck together with PVA glue.

Traditional Turkish Fisshing Boat. All things is wood and hunred percent handmade. Also it is RC boat.

HMS Nelson, scratchbuilt to 1/8" scale. Powered by two motors driving twin contrarotating shafts with three blade props. She sails on Lake Lisgar, Tillsonburg, Ontario.
I decided on Nelson as she took part in Operation Pedestal, from which I made a 1/216" waterline model of SS Ohio, the ship that saved Malta.
She took a little over 600 hours from solid chunk of basswood to launch. Probably info collection took as long!

Guess most of you have heard of the Khetanna, Jabba The Hut's sail barge from Star Wars. I looked around on the net and to my big surprise, the search engines did not spit out radio controlled versions of this model. Which made me think, and then decide to built my own.
It is scratch build, based on a "scudder" hull, a design by Glenn G. I printed a few pictures of Khetanna from the net and used those for guidance in the process.
The superstructure is a combination of balsa and ply wood. in the Star Wars tradition, the boat is propelled by a jet propelled engine. To finish it off, a Lego version of Jabba was added for extra detail.
It was a fun and fast project to built, maybe a dozen or so evenings.
(scratch) building is my passion and only sail the boats with my son about once a month. We've got a pond near Newcastle (AUS) harbour which is pretty good (providing there's no weed in it) but the disadvantage of this pond is salt water, meaning a proper rinse of the models is needed after each sailing session. Recently we have moved our sailing sessions as well to the liberty pond in town. The model captures the audience, the vast majority recognize the Khetanna immediately.
Happy sailing.

Jeroen

Lovely afternoon at Fleetwood with no other boats in sight. Went for a first sail with Deans HMS Cossack, but a little unstable , so let snuffy loose. She needs an engine change from a 650 and a new paint job. So maybe next year. 😎 😎 😎

Purchased from PJ Wiles sailing on the Q2 lake Woodhorn Ashington repeat of the 1st video ( sorry )

Stolen Boat. Please be on the lookout for this beautiful KRICK VICTORIA complete with a Chedder Puffin Steam Unit, This boat was stolen from a member of the Mutual Model Boat Society, Heywood, Manchester. when some scumbag broke into his workshop over the weekend of 5th 6th September 2015. as well as his pride and joy they also stole a Spektrum DX6I / 3 x 40Mg / 2x27 Mg Tx's, plus tools???.

Should you hear or be offered this boat please contact me. or the police
Colin Travis 07905028298

Completely scratch built using balsa wood and Mahogany strips for the decks and bridge and the free plan by James Pottinger issued in Model Boat Magazine November 1996. The plans were well drawn at a scale of 1:93 how ever I doubled the size by just transfering each measurement directly onto the wood and a few card patterns were made when panneling the hull.
Powered with twin 12 volt motors, two 12 volt lead acid batteries and two 1 3/4" props I am well sattisfied with the end result. A full build log with pictures can be found on the ''Leith built Ships" web site, or look under ''The Loftsman"

Made from card then put it all on ply wood then fiber glassed .

Pictures Atlas Crane made plastic & wood
from some plans

scratchbuilt from ply and balsa wood powered by two Caldercraft 750 motors to 40mm props only took about three months to build as a winter project its not perfect but was never meant to be more than a toy, 54 inches long and gives a good response in speed and handling