Photos & videos

Sign in to share

Search results

93 posts · Page 1 of 8
SimpleSailor
Lieutenant
1 / 6
Sailing on a Sunday
Just a few photos of the Three Musketeers sailing on Sunday 19th July. We seem to be the only three that turn up on a regular basis. Just so happened there was a young lady photographer (Inga Zaiat) taking pictures around the lake. She asked if she could take some of us and the boats. From left to right Myself, Arthur & Ian. Arthur picked up the Victoria for a song at Model Boat Mayhem and after a bit of tinkering we had it up and sailing. Considering the sails are in poor condition it sails very well. Ian's boat is a second hand DF65 and mine (Red one) is built from plans out of the Model Boats magazine but does have a purchased DF65 rig. All good fun. PS. I uploaded the photos in low res as they take up less space and load faster.
Liked by hermank and Ronald and
2 comments
  • RossMCaptain
    Like the photo! What's the issue with the sails on the Victoria? Are they stretched out?
    Liked by hermank
  • SimpleSailorLieutenant
    Hi RossM. Yes they have been stretched and are out of shape.
    Liked by hermank and Ronald
LewZ
Admiral
Suncoast Scale Model Boat - March 15, 2026 meet
Stunning weather most model boaters would be jealous of. Warm, but not hot! Very gentle breeze. No rain! But not many showed up. Wait 'till the summer comes" No complaints about it being too hot for model boats!

Anyway, I wanted to get back to my trawler with another video. This time on board with my old GoPro. Had some issues with the battery packs slipping inside the hull. I'm going to remove the one for the lighting as I don't use them anyway. Then I will add some fixed ballast in the bottom. The video with the camera (and waterproof housing) on the top of the pilot house made the boat heel quite a bit. Going to try for some more on board videos in the near future on my other boats.

Got the 4 minute YouTube link here:
I hope you enjoy it!

Lew
Liked by Wolle and jrjandcole and
2 comments
  • jumpuglyFleet Admiral
    Lew! This is great!!!
    When you have a moment can you post a picture of the rudder and prop set-up you've used Elena? Or is it in your harbor or build blog? I have a trawler in my future.
    Many thanks!
    👍
    Liked by hermank
  • LewZAdmiral
    Nothing fancy about the prop and rudder. The rudder pivot axis is about 35% back from the leading edge. This way the rudder forces more of the prop back wash to the side to help the boat turn sharper.

    Lew
    Liked by hermank
GARTH
Commodore
1 / 3
Light up the Night on the September 25th 2025 including safety cautions
Our club will be sailing at Spencer's in the evening with our model boats lit up. I have upgraded my Jimwilder Tug with an LED light from our Dollar Store ( $ 4.50 ) now. Did a few modifications to get it in the tug.Looks pretty good & should be visible.
Liked by Mike Stoney and Madwelshman and
1 comment
  • hermankRear Admiral
    Gentlemen skippers
    The koninlijke model yacht club antwerpen,1of the 5 oldest model yacht clubs in the world, 120 years young wishes you and your members a fantastic event! A lot of participants, interested visitors and a lot of youth as they are the future of our hobby. Regards KMYCA
    Liked by RNinMunich and philcaretaker and
LewZ
Admiral
1 / 3
SSMBC update: Dock upgraded
For over 60 years the "model boat" pond at Lake Seminole Park (Seminole, Florida) has been a popular place for R/C model boats. I know that is only a short time compared to our Euro friends, but keep in mind that Florida was not a well populated state 150 years ago.

Today, I was at our meet (not many ther, too hot) and I found Pinellas County Parks had moved the dock about 3 feet further away from the shore. They also added two safety rails on the corners of the floating dock (about 8' X 35') at my request. I must say they have been very responsive to my requests.

From my view I feel that this is one of the best natural facilities in the state, perhaps in the US for model boating.

Lew
Liked by MartyV and DWBrinkman and
3 comments
  • LewZAdmiral
    Thanks Philuk. Me getting back to model boating is gwtting closer. I promised myself no model rc boats and rc tanks until my home is restored. Each day I get things done is a step closer to being active. This has taken a toll on us and is taking longer than anticipated. But, as we approach the end of this terribly hot summer that might be the turning point.

    Lew
    Liked by hermank and EdW
  • GARTHCommodore
    Your very lucky because up here in Hamilton Ontario Canada we have lots of city parks that have ponds for run off water but the city blocks them off post signs not for public use and warn about ticks in area becuse the weeds arn't cut down and there's no way to launch a model boat . So happy sailing P/S I never learned to spell properly sorry.
    Liked by Ronald
philcaretaker
Commodore
Weed Problems ?
Are other clubs suffering ???

Local BMBC member Mark did a great job clearing a large amount of weed from the main lake to allow the full size pedal boats and rowing boats to operate . Unfortunately further light "wispy" weed is still dethatching and presenting a problem for most of our members model boats.
Until the situation improves , we will be sailing at the Fountain Lake.
Thanks Mark for all your efforts !.
philcaretaker
Commodore
1 / 2
Eye`s on Model Boats
Just for Fun !!
Liked by PeteJev and AlessandroSPQR and
3 comments
  • DoogleVice Admiral
    The eye's have it😂
    Liked by RNinMunich and Len1 and
  • RNinMunichFleet Admiral
    Very clever Phil👍
    But why has he got his hands stuck in large sausage rolls?😁😋😋

    BTW: Any Blog/Pics explaining how it was done? The 'Inside Story'😉
    Cheers, Doug😎
    Liked by Len1 and hermank and
GARTH
Commodore
lighting
Just answering a question about the club run at night & yes some guys go overboard with lighting hope I can photo some of the more exotic lighted model boats. Here is my Gumboot Cloggeroo lobster model boat with a few lights . That name is a song by Stompin Tom Connors a Canadian song writer .
Liked by jumpugly and EdW and
2 comments
  • FredCommander
    I try and keep mine as they would be in real life, this is just one of my tugs.
    The reason they are so bright is that a few of the members of my old club could not see the duck house in day light, let along a model boat.
    Liked by PemyslJ and IanL1 and
  • IsaacLieutenant
    If you are looking for very low cost lighting ( that is not scale ), I purchased extra blinking bicycle lights that are battery powered. These are small cubes that emit red or white and I am sure others as well.

    I just place it on my boat and let it go at my pond. They are bright and fun to watch.



    Isaac
    Liked by GARTH and Peejay and
GARTH
Commodore
Andrea Gail
The model boat club I'm in will hold a boats in the park at night on Thursday Sept.19th at 6:30 P.M. At Spencer's pool in Burlington . We do get a lot of spectators that enjoy the lighted model boats So I figured I'd better install some lights on my Andrea Gail the photo isn't that good but it will have to do for now. P/S installing lights sure is a pain ! And I'll take a few shots when it's darker.
Liked by LeeA1 and RodC and
4 comments
  • Mike StoneyRear Admiral
    👍👍😊😊
    This was once also a Bristol Bay!!
    A so-called basement corpse
    😍😍
    Bb Michel-C.
    Liked by Len1 and RodC and
  • RonaldFleet Admiral
    All lit up
    Liked by sirscapa and Isaac and
GARTH
Commodore
1 / 5
Clyde Puffer
As promise here is a few photos of some of Confederation marine modeler military model boats at Spencer's pool in Burlington Ontario.
Liked by Razor1955 and SimpleSailor and
GARTH
Commodore
1 / 4
Yard Sale Find
As promised A few photos & some members models in Spencer's pool Burlington. Some of the boats shown are from other model clubs mostly Toronto modelers so I can't mention names of members boats because I don't know their names. Still lots of time for sailing & the puffer still leaks so I'll put stuffing box on a steeper up angle above water line. I just love fixing a problem with my model boats.
Liked by Razor1955 and jumpugly and
2 comments
  • GregHiltzWarrant Officer
    Looking good, from a fellow modeler from Saint John NB.
    Liked by Len1
  • Chum444Commodore
    Just a thought. Is your shaft log filled with a waterproof grease? I have a couple of models where the motor end of the shaft log is below the waterline. They are packed with waterproof grease which stops water incursion.

    Photo shows construction of a grease reservoir.
    Liked by Razor1955 and RossM and

Liked by

Loading…

Delete this post?

It will be removed from the site.

Discard this draft?

Your draft will be deleted and cannot be recovered.

You have an unfinished draft

What would you like to do with it?