Photos & videos

ARL58

Petty Officer 1st Class 2 years ago

1 / 4

Sailing at Madrid (Spain)

As far as I know, there is not a model boat club at Madrid. However, modellers gather Sundays at 10:30 to sail at a pond -actually a set of four connected ponds-, located in a municipal park, in the south of the city. Access is free.
The boat in the video is a sidewheeler, scratch built by my good friend Eduardo Yraola, who is a far more accomplished modeller than I am. She has steam propulsion, and sails at a majestuous pace.

Liked by Isaac and jumpugly and

5 comments

AlessandroSPQRFleet Admiral2 years ago
Excellent choice Len, I really like it, too bad you're too far away.
Like 2
Liked by Len1 and Peejay
IsaacLieutenant2 years ago
I wonder about this boat turning radius. Is there a speed differential to the paddle wheels, or is the turning all done by the rudder?

Isaac
Like 1
Liked by Len1

Dane

Able Seaman 3 years ago

1 / 13

Gundalow Scratch Built Model

Here's my scratch built model of a Gundalow. in their final iteration they were lateen rigged cargo hauling workhorses of the New Hampshire and Maine estuaries from the mid 1600's thru very early 1900. Flat bottomed with a very shallow draft that allowed sailing (or following the tides/currents) to ports upriver with needed supplies and returning with cargo of all types. My model is 50" in length. It is used as a display model for The Gundalow Company in Portsmouth, NH. I also use it with historical presentations I give to schools, historical societies and libraries. The model is fully functional. While not radio controlled it has the ability to float.

Liked by RobW1 and AlessandroSPQR and

8 comments

RodCLieutenant Commander3 years ago
Beautiful ! What is the function of the chains at top of rudder? A "limit switch"??
Like 1
Liked by Dane
DaneAble Seaman3 years ago
Hi Rod. You are correct. Because of the size and location of the rudder it needs to be protected from stressing beyond it limit. That’s a great question. In all my presentations no one else has ever asked. Good eye!
Like 1
Liked by RodC

philcaretaker

Commodore 3 years ago

1 / 2

RC Tyne Paddle Tug

Built by Buxton Model Boat Club member Adrian , he says :- "essentially the paddle boat is scratch built but uses some fittings and materials from a Disar "Vanguard" kit ".
Adrian used drawings of "Flying Scotsman" for inspiration, but is not a faithful reproduction, although "Old Trafford" is also quite similar .
This was the maiden voyage so plenty more work to be done on detail and ballast etc.as the boat still sits a bit low in the water.
For reference see :- http://tynetugs.co.uk/
http://www.tynetugs.co.uk/oldtrafford...

Liked by RPLedm and philsacc and

7 comments

PeejaySub-Lieutenant3 years ago
Very lovely. I have quite a few photos of her type in my future projects group.
Like
Mike StoneyRear Admiral3 years ago
Beautiful model! Congratulations ... 👍👍👍
Greets Michel-Cl.
Like

chugalone100

Commodore 3 years ago

1 / 3

Push Tug Rescue Boat

This is nuts but I’m already designing what my scratch built rescue boat will look like.
I’m hand drawing all of the lines on tracing paper in case that I need to change something but in the next few days I will clean it and finish it so you guys could see it.
After complete I will build a separate contraction somehow looking like this one that could be assembled whenever is needed and taken off to carry away.

If you guys don’t mind, I would like to your version of your rescue boats.

Liked by Colin H and MouldBuilder and

chugalone100

Commodore 3 years ago

1 / 12

Friendship Sloop 1:12 scale

This my version of the Friendship sloop, also known as a Muscongus Bay sloop or lobster sloop, is a gaff-rigged working boat design that originated in Friendship, Maine around 1880 and has survived as a traditional-style sailboat.
This build is from an old Laughing Whale model and was given to me by the son of a great model builder that has passed away.
I know that this kit is r/c friendly but I did it as a static model.
Everything from the rub rails up is entirely scratch built. The Eagle figure head was hand sculpted.
Again I hope the model is to you guys’ liking.

Liked by Ronald and RodC and

4 comments

Newby7Fleet Admiral3 years ago
Great boat 👍👍👍👍👍👍 the detail
Rick
Like 1
Liked by chugalone100
PeejaySub-Lieutenant3 years ago
Saving this one for inspiration. I have that kit in very early construction and after many years it is suffering from multiple moves, no space to build and multiple moves. Will have more space soon and fewer distractions.

Yours is a beautifully built model, which would be proud o any mantel or display shelf!
Like 4
Liked by jbkiwi and Scratchbuilder and

chugalone100

Commodore 3 years ago

Galilee Boat

With all the members permission I would like to share my Galilee Boat project.
Here is a brif story of how I got my hands on the model.
I have to mentioned where I got this kit from because is always good the real story behind the kit.
The place is "SE Miller Guitars". http://www.semillerguitars.com/sea-of-galilee-boats/.
Scott Miller owns the business and I asked him how he came to produce this now famous boat kit.

This was his exacts words:

I was a moderator at MSW when Captian Pugwash was running the site and had just moved on from building kits to scratch building. I did the Triton cross section build that was going on at the time and that got me interested in building models other than standard scale ships. This lead me to building boat models because they are fun to build and can be done in much less time than a three master ship. The also don't require a lot of rigging which was attractive to me as well.

One model that was fun to build and could easily be scratch built was Midwest's Peterborough canoe kit. I made quite a few of these as gifts and this introduced me to building on a strong back and using thin CA glue to weld planks together

I started looking at different boats that I could model and found that no one offered a Sea of Galilee boat model kit other than a paper one from a German company. I found an excellent book by Shelly Wachsmann about the discovery of the Kinneret boat and that book had a set of ships plans in it. I used those plans plus what I had learned from building Peterborough canoes to build the first 16" Sea of Galilee model.

Liked by hermank and RogerA1 and

Ballast

Chief Petty Officer 1st Class 8 years ago

1 / 15

"Exuberent" DH142

South Devon Crabber :- Cygnus GM 32' 1/12 Scale. Donor hull 32" fitted out/scratch built. Replica of actual vessel that floundered off Weymouth in 1983. Model build started in 1981 and completed in 2018 !!!

Liked by hermank and stevedownunder and

1 comment

GrahamP74Sub-Lieutenant8 years ago
Such a great model and an even better story Alan, although there was a tragic and sad ending to the full size boat it is great to see such a fine model. Graham
Like 3
Liked by River Rat and Peejay and

LewZ

Admiral 4 years ago

1 / 7

"Whaleback" Freighter

I know this is not one of my boats, but belongs to one of our club members. It is a 1/48 scale model of a "whaleback" freighter. The real George Washburn was built in 1885 had a length of 320 feet. What is unique about this is it had a almost tubular cross-section hull. Many times I heard visitors call it a submarine.

Jim's model includes horn sound, lights, homemade smoke generator and a ballast fill/empty system to reduce transportation weight. Video Link (this is not on YouTube, you have to copy this link to your browser to see the video): http://ssmbc-fl.org/Videos/Video-03-30-2014-01.mp4 (😮The link icon below WILL NOT WORK!😮)

I though some of you might enjoy this wonderful scratch built model!

Lew

Liked by HappyHaggis and figtree7nts and

4 comments

LewZAdmiral4 years ago
Ron, I will not go into too much detail on Jim. He is retired, in his early 70's, and has building models since before I met him about 12 years ago. He doesn't bother with computers too much but enjoys his Canon digital cameras.

The story of building the model of the "Whaleback" seems to stem from where is lived many years ago up in the great lakes area of the U.S.

Jim is a laid-back person and deeply interested in building his models. Most of them are 1/48 scale, but in recent years he took a turn and started going after some complicated kits, some out of production for many years, like Sterling kits he found on Ebay. Other recent builds include some WWII battleships, plastic models that are motorized for RC.

One unique thing about Jim is all (I believe) of his models involve gear reduction between the motor(s) and shaft(s). He hand makes small parts where many people will avoid the small details. Here is a video of one of his other models, the City Of Buffalo:

There are a lot of photos of his work on our website... http://ssmbc-fl.org

Lew
Like 2
Liked by HappyHaggis and NicA1
ZdenekBAble Seaman4 years ago
In Polish magazine "Modelarstwo Okretowe", there is a plan available for such a whaleback design (http://www.modelarstwookretowe.pl/index.php?p=19&s=numer_opis&id_n=38 ).
Maybe it could be of help...

Zdenek
Like 1
Liked by AlessandroSPQR

philcaretaker

Commodore 4 years ago

1 / 9

Camera Boat - still emerging !

From a design concept incorporating an old power boat destined for the rubbish tip ! - to a functional Camera platform to capture some of the fantastic models that sail at our local venues.

The emerging creation ( all be it rough and ready !) will incorporate rotating fan motor and 360 degree rotating camera with live feed FPV camera.

My enjoyment is to capture the the skill, time and effort that fellow modelers put into their creations - whether they be they scratch built, own designs, kit sets or off the shelf.

As Requested :- Link to previous Camera Boat (SwampDawg)
** **

Liked by Geoffrhoose and Roy-Bullivant-Jnr and

dave976

Captain 5 years ago

1 / 11

Master Hand seen at CreweMBC sail Monday 8th Nov 2021

Brian Clewes brought along a nice example of his scratch built Master Hand retired fishing boat, for a sail. When larger more powerful mechanised boats were introduced this type was abandoned. Many were rescued and turned into pleasure / racing type craft and that is what this model depicts. Not seen for some years but is ageing well. The static pics will be of interest to any modeller considering making a scale sailing ship of this type. I did film some video and will share this later when edited.
enjoy
Dave

Liked by Muskrat and Colin H and

3 comments

NerysFleet Admiral5 years ago
Beautiful boat, I love these fishing boats, what is she based on a Brixham or a Lowestoft boat?

Cheers, Nerys
Like 1
Liked by Martin555
dave976Captain5 years ago
Here are a couple taken at at show.
It's the Lowestoft boat.

Dave
Like 3
Liked by Muskrat and Nerys and

Sakibian

Chief Petty Officer 2nd Class 5 years ago

1 / 24

Motor Gunboat

Scratch built motor gun boat from Bangladesh.
Tried my best to upgrade it into a brushless one. First attempt was brushed and it was kind of a pain in the ass.
It runs far better now.

Liked by Colin H and RNinMunich and

jbkiwi

Fleet Admiral 5 years ago

Hartley cabin boat on trailer

Short vid taken by a friend recently, of the model, towed by the RC scratch built Jeep -(taken with his tablet, - a bit shaky but he is over 80) I probably shouldn't have been doing circles around him, but we were doing this in a carpark behind his apartment, (magic location by the way, right on a marina.) Had trouble finding reverse due to the EL Cheepo ESC,- have a new one coming. Jeep uses a geared 550 motor on 3s LiPo.

Boat is featured on waitematawoodys.com today as well, with all the big boats,- quite a privilege, as they don't often feature models! Lucky to have had my ST and HSL on there in the past also, as they were models of ex NZ RNZAF boats which were being featured.

https://waitematawoodys.com/ (site for all NZ built classic Launches)

Video by Ken R.

Liked by Martin555 and Colin H and

5 comments

NerysFleet Admiral5 years ago
Hi JB,

I'm afraid my days of building real boats are long past. I have difficulty in finding enough strength to perform even the simplest tasks, Alice has to come to my aid for almost everything these days. I was very pleased that I managed to finish the rigging of my latest barge project a few days ago with only the slightest intervention from her -and that's a model!. Actually the only time I ever built a boat from a plan was when someone gave me a part built Wharram cat. The rest of the time I built on the old adage of if it looks right, it probably is. And, blowing my own trumpet, it always seemed to work for me.

Cheers, Nerys
Like 3
Liked by Martin555 and jbkiwi and
jbkiwiFleet Admiral5 years ago
Hi Nerys, you're doing well to do what you are doing still under the circumstances, and you are not just sitting in a wicker chair staring out the window. Your models are great and a credit to you, and you are obviously enjoying them. I'm the same (re - if it looks right.......) as most of my models, (boats and planes) are scratch built or highly modified kits or resurrected and improved bin jobs from other modellers.

The only model boat I've built from a proper plan, was my Vic Smeed MTB, the rest have been from drawings from model magazines. I built a 15ft delta hulled racer in the late 70s using the 'looks right' method, and powered it with a 75hp outboard. Managed to get 50mph out of it, and it handled quite well. Blew the motor up before I could refine it unfortunately. As kid we built 8ft skimmers, powered with a 10hp outboard which were a lot of fun as well.

I've enjoyed restoring 5 small boats (plus a f/glass clinker sailing dinghy for my son) and completely fitting out my Hartley from a shell, but the price of materials is getting prohibitive these days, and approaching the price of a small new car to build anything around 20ft. My 15ft day sailer for example (built 1986) would probably cost around $12,000 to build today complete. Not a lot of home building these days unfortunately due to the cost,- cheaper to buy a second hand boat ready to sail or motor.

I think we are lucky to be able to build from an idea without a plan and have it work, as many people are not as fortunate. Perhaps boating experience gives you an idea of how things should work. We have a top boatbuilding company here who started building fantastic launches, starting with a 'looks right' half model,- taking measurements from it and scaling them up. Has worked well for them since the 50s

Stay Safe.
JB
Like 1
Liked by Martin555

MODEL BOATS WEBSITE

Search results