Completed main deck and trimming !
Couldn't get clean lines on painted surfaces.
Painted as best as I could!
Have to get some mineral spirits to clean my brush!
So, can't paint minor over painted area's!
Don't have a local hardware store to go to.
They're closing everywhere I go to!
I heard you can clean a brush with oil (cooking oil).
Is there any truth to that?
[{"id":"1532273048","name":"1532273048.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1532273048\/l","thumbUrl":"https:\/\/hobby.land\/media\/1532273048\/s","isImage":true,"ext":"jpg"}]
Completed main deck and trimming !
Couldn't get clean lines on painted surfaces.
Painted as best as I could!
Have to get some mineral spirits to clean my brush!
So, can't paint minor over painted area's!
Don't have a local hardware store to go to.
They're closing everywhere I go to!
I heard you can clean a brush with oil (cooking oil).
Is there any truth to that?
I will try the vinegar. until I can find some mineral spirits!
I couldn't get clean lines cos I had to cut the tape!
With an exacto blade. Had to go around very sharp turns!
Also tried pressing down on the tape.
But still had problems. live and learn I guess!
The cooking or any oil will do . Rub well in while still fresh followed by washing up liquid. May take a few tries. Petrol or diesel will do very well as will meths, nail polish remover (acetone) car paint thinners. Car paint suppliers or accessory shops will supply The latter pair will soften hard brushes if soaked. Petrol and diesel will do too but take a bit longer. Squeeze out as much as you can then wash thoroughly with washing up liquid. Something else you can use is one of those hand cleaning gels like Swarfega. Whatever you use work it well into brush right into the stock manipulate it well with fingers. Then rinse well and allow to air dry .If not using them again for a while lightly dip the tips in some light oil. Baby oil is ideal then put an elastic band lightly round the bristles and put into a brown paper bag and store in a cool darkplace .Not the airing cupboard. Hard work but worth it for good brushes. Only oil natural bristles not synthetic ones.👍
Brooklyn is now 90% completed!
There's a few more thing's to do.
Still have to work on her lighting system!
Maiden Voyage set for Aug' 4th!👍
Will make a video, if I don't forget!
[{"id":"1532283470","name":"1532283470.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1532283470\/l","thumbUrl":"https:\/\/hobby.land\/media\/1532283470\/s","isImage":true,"ext":"jpg"}]
Brooklyn is now 90% completed!
There's a few more thing's to do.
Still have to work on her lighting system!
Maiden Voyage set for Aug' 4th!👍
Will make a video, if I don't forget!
Yes, the fire stations are now completed!
I was procrastinating cos I knew.
It would be a pain putting the hoses together!
I did everything to keep my fingers.
From getting glued together in the process.
There are four fire stations.
2 port side 2 Starboard side far and aft!
Next thing to do.
Is glue the forward ladder in place!
But, I think I'll wait on that.
I don't won't to snap it off while working on her!
Note:
Take you time with this step!
[{"id":"1532631953","name":"1532631953.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1532631953\/l","thumbUrl":"https:\/\/hobby.land\/media\/1532631953\/s","isImage":true,"ext":"jpg"}]
Yes, the fire stations are now completed!
I was procrastinating cos I knew.
It would be a pain putting the hoses together!
I did everything to keep my fingers.
From getting glued together in the process.
There are four fire stations.
2 port side 2 Starboard side far and aft!
Next thing to do.
Is glue the forward ladder in place!
But, I think I'll wait on that.
I don't won't to snap it off while working on her!
Who need's a good laugh!
I ordered the wrong scale crew!
But the wife wants me to put then.
On a non scale square rigger I have!
Some ship I found at the thrift store!
Can anyone guess the scale?
Oop's it's Z scale!😲 have to order G scale!
[{"id":"1532640408","name":"1532640408.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1532640408\/l","thumbUrl":"https:\/\/hobby.land\/media\/1532640408\/s","isImage":true,"ext":"jpg"}]
Who need's a good laugh!
I ordered the wrong scale crew!
But the wife wants me to put then.
On a non scale square rigger I have!
Some ship I found at the thrift store!
Can anyone guess the scale?
Oop's it's Z scale!😲 have to order G scale!
Afternoon Ed,
I have a similar type of novelty / souvenir shop model on the shelf above my desk. it's the Mayflower. Bought it in Portugal years ago.
Pain in the neck to get the dust off the sails and rigging😡
Happy crew hunting. Lucky to have two such stores within striking distance. Cheers, Doug 😎
On the life boat, Had to order some black rope!
Dumas uses black string. I didn’t like this so found a ship company in New Jersey. They have different size miniature rope. I had ordered some but didn’t know the size! Luckily was able to send back what they had sent me. And was able to send a sample of some tan rope back and a block that dumas sent made of plastic! I want wooden blocks!
And black miniature rope. it’ll look more realistic in the long run!
Note:
Replace the black string.
For black rope it will look more scaled!
I ordered from,
www.syrenshipmodelcompany.com
Order .025 this will be the right scale rope!
[{"id":"1532728121","name":"1532728121.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1532728121\/l","thumbUrl":"https:\/\/hobby.land\/media\/1532728121\/s","isImage":true,"ext":"jpg"}]
On the life boat, Had to order some black rope!
Dumas uses black string. I didn’t like this so found a ship company in New Jersey. They have different size miniature rope. I had ordered some but didn’t know the size! Luckily was able to send back what they had sent me. And was able to send a sample of some tan rope back and a block that dumas sent made of plastic! I want wooden blocks!
And black miniature rope. it’ll look more realistic in the long run!
Note:
Replace the black string.
For black rope it will look more scaled!
I ordered from,
www.syrenshipmodelcompany.com
Order .025 this will be the right scale rope!
Spotlight is now completed!
I have to solder the port & Starboard Lights!
Anyway that's a small project on it's own!
Unlike Serenity the Brooklyn isn't going to have a working spotlight! it's not in the budget!😲
[{"id":"1532788044","name":"1532788044.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1532788044\/l","thumbUrl":"https:\/\/hobby.land\/media\/1532788044\/s","isImage":true,"ext":"jpg"}]
Spotlight is now completed!
I have to solder the port & Starboard Lights!
Anyway that's a small project on it's own!
Unlike Serenity the Brooklyn isn't going to have a working spotlight! it's not in the budget!😲
On starting the build of the Brooklyn.
I had purchased 1 bottle of glue! 2oz
It actually take about a bottle and a quarter.
Give or take!
See when I built the Jersey City.
It only took one bottle to put her together!
The Brooklyn is 3.5" longer than the Jersey City.
Hence more glue needed!
[{"id":"1532829310","name":"1532829310.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1532829310\/l","thumbUrl":"https:\/\/hobby.land\/media\/1532829310\/s","isImage":true,"ext":"jpg"}]
On starting the build of the Brooklyn.
I had purchased 1 bottle of glue! 2oz
It actually take about a bottle and a quarter.
Give or take!
See when I built the Jersey City.
It only took one bottle to put her together!
The Brooklyn is 3.5" longer than the Jersey City.
Hence more glue needed!
Look as if I'll be postponing Brooklyn's Maiden Voyage.
Still have quite a bit of work to do on her!
I'm also waiting for some .25 miniature rope to arrive in the mail!
I have one last detail to add which is a steam whistle!
But, have to wait on that for now!
I think her Maiden Voyage, will be late sept early oct!😱😲
Look as if I'll be postponing Brooklyn's Maiden Voyage.
Still have quite a bit of work to do on her!
I'm also waiting for some .25 miniature rope to arrive in the mail!
I have one last detail to add which is a steam whistle!
But, have to wait on that for now!
I think her Maiden Voyage, will be late sept early oct!😱😲
The fire monitor is connected to a water pipe.
But in this case it's a solid piece of aluminum tubing!
Which I had to bend and shape accordingly.
To the Pilot House and Captain's Cabin!
After bending to shape. I then glued miniature washers.
To simulate connection seams!
And there we have it.
Fire monitor and pipe painted the typical Red for Fire!
[{"id":"1531758643","name":"1531758643.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1531758643\/l","thumbUrl":"https:\/\/hobby.land\/media\/1531758643\/s","isImage":true,"ext":"jpg"},{"id":"1533001496","name":"1533001496.jpg","caption":"","url":"https:\/\/hobby.land\/media\/1533001496\/l","thumbUrl":"https:\/\/hobby.land\/media\/1533001496\/s","isImage":true,"ext":"jpg"}]
The fire monitor is connected to a water pipe.
But in this case it's a solid piece of aluminum tubing!
Which I had to bend and shape accordingly.
To the Pilot House and Captain's Cabin!
After bending to shape. I then glued miniature washers.
To simulate connection seams!
And there we have it.
Fire monitor and pipe painted the typical Red for Fire!
I will try the vinegar. until I can find some mineral spirits!
I couldn't get clean lines cos I had to cut the tape!
With an exacto blade. Had to go around very sharp turns!
Also tried pressing down on the tape.
But still had problems. live and learn I guess!