Another winter project for myself this time. Twin brushless motors/ESC's all water cooled. interior and deck lights got some figures for deck then onto the lake when the weather breaks.

A winter project for a friend who hasn't the resources to build, so I helped him out. nearly ready for the lake. Twin brushless motors/ESC's all water cooled and a few interior exterior lights.

HMS Nelson, scratchbuilt to 1/8" scale. Powered by two motors driving twin contrarotating shafts with three blade props. She sails on Lake Lisgar, Tillsonburg, Ontario.
I decided on Nelson as she took part in Operation Pedestal, from which I made a 1/216" waterline model of SS Ohio, the ship that saved Malta.
She took a little over 600 hours from solid chunk of basswood to launch. Probably info collection took as long!

I decided to build from scratch HMS Blake, I used the Jecobin Plan for HMS Tiger 1/96 scale. This was the first ship I served on in the Royal Navy 1976 to 1979. The hull is supplied by Scalewarships.com, the fittings, Scalewarships.com, John Haynes Fittings and SIMAR; the running gear from GT Sitek.

The build is nearing completion and now requires the guardrails and the decks fixing in place.

composite Marblehead from pj Wiles on the Q2 Lake

Purchased from PJ Wiles sailing on the Q2 lake Woodhorn Ashington repeat of the 1st video ( sorry )

1/12 scale kit from Metcalf moulding the most difficult part on this model was the rudder section,you have got to get it right because once fitted the deck goes on and there is no turning back,it has 2 X 550 motors on 8.4 sails very well,not to fast but not to slow either,I sail at king Lear model boat club in leicester when I get a chance,lovely big lake all type of vessels on water,eg"
: steam,electric,ic yachts what ever you like

Police (Scotland) 1.12 scale. made from a Semi-Kit by Models by Design, built 2014.
This is modelled from the interceptor42 range by Safehaven Marine. This is my first full build of a model, having only done restorations previously.
Model length is some 42 inch, beam of 12 inch. (106cm x 31cm)
Power is by twin E-Max BL2826 Brushless motors and 1, 80amp speed controller running on 2 NiMH 7.2 volts.
Fitted with Action electronics Police siren, and with detailed rotating blue lights and searchlights.
I sail this at Cold Knap Lake Barry Vale of Glamorgan, and I am the Founding member of the Vale Of Glamorgan Model Boat Club.
Also included is my Portland Pilot interceptor 42 which was the original prototype from Models by Design which I purchased and added lighting etc, this runs on Brushless motor running on 12Volt lead acid.
Visit our website at http://vgmbc.org/

This is a raft that one of our members Noel built from bean cans soldered together powered by a blower motor /12v 9mah battery it is a model of his fathers full size raft made from 45gallon drums powered by a car engine it was sailed off Cresswell near Newbiggin by the sea it made headlines in the local newspapers as Noel can no longer join us at the lake due to his failing health I will keep it and sail it on his behalf and use it as a rescue craft

PJ Wiles Oscar aka Spook with her top suit on struggling to cope in a high wind on the Q2 lake Ashington

Got my 3rd build finished its a Northumbrian Coble, looking forward to put it on the lake at QE2 park Ashington

This model took me 3 years. Copper plated the hull panel by panel. Even found a crew for her, then added an RC and took her to the lake.
She sailed well, but my enthusiasm to leave the gun ports open cost me dear. The water got in the hull and knocked out the RC, leaving her listing and drifting some way from shore.
Salvation came in the shape of a 10 year son of a friend, who strip to his underwear and swam out to rescue her!
Now she sits retired in a glass case.