A US Navy ARS ( Auxiliary Rescue Salvage ship), built to 1/48th scale. Twin screw with working radar, lights, anchor, and fire monitor. Built from a bare hull, with a lot of Thanks to Shapeways 3D printed parts. She is shown, at anchor, with a friend USN ATF ( Auxiliary tug Fleet) in the back ground.
Thank you. She was a challenge to build becuse the class changed aft the first three ships were built. All other after the third were completed with one aft mast and several different boom configurations. Interestingly, two of the original design hull went to the RN via Lend Lease and served the Australians. After the war they were sold to a British Columbian Tugboat firm and made historical reputations for themselves.
my fleet, think i need a bigger pool happy with the lights and now the proud owner of an aziz will post pics of it later .smit rusland Southampton little tug ,yewgarth ,fairmount alpine ,pacific brigand, pilot boat all tested and running very well
💡Scratch built from plans. Plank on frame. Large brushless motor,150 amp esc,length is54 inches custom made propshaft ballraced at each end and middle. Has running lights,and large very bright searchlight. Flack Mats were made by better Half. Everything else was scratch built by myself.
Do you alight the lights remotelly, or just locally?, do the lights share a single group or maybe you have several groups of lights?, could you please, show us the device used to switch them on?
Hello
i can start all light from the remotcontroll , it is to kinds o lights one 6 v and one 3.5 v , runninglights are 6v and working lights are 3,5 v .
the small led light are 3.5 v. i made a switch of one servo and 2 microcontakts
Sorry fore my bad English
// Jugge
Hellenic Navy - La Combattante IIIb class Fast Attack Craft
More great photos in this series taken by my friend at Albert Park Lake in Melbourne. These of my P28 - Ensign Simitzopoulos. Great wave patterns. These photos were all poster size in detail. I have had to shrink them to get them posted here. This boat is in my harbour.
The 1/35 scale boat is scratch-built, mainly from Balsawood and marine ply with a fibreglass covering. The guns can elevate and rotate. The radar units both rotate and there are LED navigation lights that I forgot to turn on. There is also a flashing red LED strobe warning system. It needs a little work to get the 4 LEDs a bright brighter.
Just built Krick RO-Marin Neptun. First tug I’ve built, she came out okay, I think. 6volt system, MFA 2.5 geared motor, Graupner SXM switch controlling the lights, older Pixie brushed esc controlling water monitor pump. Old Futaba MC210 for motor esc, Frysky QX7 radio. This video was shot at Towne Lake, McKinney Texas. She well on her maiden, needs about 2-4 ounces ballast in the stern though.
"Searcher" was a Graham Goodchild design offered as a free plan in "Model Boats" in December 1981. Here is my version , many years in the building and finally nearing completion. Access to the hull on the original design was via a hatch above the cockpit - I had no faith in my ability to make it water tight so went for removable grp. hatches. The model is activated by a reed switch just in front of the rear hatch, which saves me the hassle of doing/undoing all the nuts (this had not been fitted when I took the first picture). The rear hatch gives me easier access to the drive coupling. The name "Nimbus2" is in honour of one of Dan Dare's spaceships in the Eagle comic. The third picture shows the ship in its final state with added 'enhancements' and working lights.
This ship was a lightship tender named "Coeur de Lion" that was armed and drafted into the Union during the civil war to counter blockade runners. This model is scratch built and is inspired by a paper model designed by Magnus Mörck. A sidewheel steamer equipped with the typical walking beam machinery, it was rebuilt to carry three guns. A line of iron plates along the gun wales added a measure of armoured protection. After the war it was returned to lightship service. On my model the paddles are independently driven, mainly because I have a Robbe Navy F14 transmitter with twin sticks. The walking beam is operated by a servo modified for continuous rotation. The original ship towed a barge that flew an observation balloon and could be described as the first 'aircraft carrier' the fifth picture shows the barge I have made - I hope one day to emulate the real thing by raising and lowering a suitable balloon. I have included some pictures of the rest of my paddle fleet.The 'Rachel Erin' is a freelance sternwheeler 'quarter wheeler' tug that uses a worm drive to the paddles. She does not steer well. The last ship is an enlarged version of Graham Goodchild's Santa Anna.
This is one of the limited edition Sirmar kits that was produce in the early 1990’s.this model was made by a friend of mine who’s a dockyard fitter and turner it was made about twenty eight years ago. Based on a tug that I worked on in and around Portsmouth harbour. This model has a working voith unit opening engine room skylights. Working lights, removable deck hatch to get at the unit like the real boat, the superstructure and gun whales are made from plasticard. The fender was made by a friend to the same type as used on the tug. The wheelhouse is copied like for like. The towing hook is copied from photos and slips like the real one. in all my years I haven’t seen another one like this . Sirmar made twenty numbered hulls as kits .
Just my cup of tea.
Regards Bill.