Here is pitcure of both my boats sailing on a boating lake not far from my home, the larger of the two was commandeered by my 8 year old son for a trainning mission he had in mind, which gave me an excuse to build another one, which is the smaller boat the picture, as the young captain needed escorting while getting use to his new command!
They are both made from balsa wood, which the material for the hull, it is sealed with a acrylic varnish,painted over the top with enammel paint with clear varnish on top of the paint! The superstructure on the larger destoyer is made from thin plywood, and on the smaller frigate its made of plasticard!
I got the lynx helicoptors on Ebay from "The Dorest Print Man" I think it was, which are 3D printed by him!

Well, what a lovely day it is today and here is a pic or two of my Boston which I built several years ago - I had to rebuild her recently that was due to the plasticard I used for the bulwarks had perished and when I picked the model up the plasticard bulwarks cracked and fell apart, so I have rebuilt with wood. Plastic was from the 1980s when I built the model.

This is one of the limited edition Sirmar kits that was produce in the early 1990’s.this model was made by a friend of mine who’s a dockyard fitter and turner it was made about twenty eight years ago. Based on a tug that I worked on in and around Portsmouth harbour. This model has a working voith unit opening engine room skylights. Working lights, removable deck hatch to get at the unit like the real boat, the superstructure and gun whales are made from plasticard. The fender was made by a friend to the same type as used on the tug. The wheelhouse is copied like for like. The towing hook is copied from photos and slips like the real one. in all my years I haven’t seen another one like this . Sirmar made twenty numbered hulls as kits .

YET ANOTHER FERRY BOAT.
THE MODEL WAS BUILT BY MYSELF IN 2008 ON A FIBREGLASS HULL FOR WHICH I AM PART OWNER OF THE MOULD. THE REST OF THE MODEL IS BUILT FROM LITEPLY AND PLASTICARD. BEING WIDE BEAM AND SHALLOW DRAUGHT THESE MODELS SAIL WELL AND REQUIRE NO BALLAST APART FROM THE JELLY BATTERY.
IT IS TWIN SCREW AND TWIN RUDDER SO IS VERY MANOUVERABLE.

Saw the plans of 'Farmont' and could not resist the challange of this model. First problem was where and how to creat a removable cabin and decided on having the whole top removable other than the forward and aft decks. I also realised that the plans were simplified so a bit of research on Google revealed pictures of the real things for sale and some indepth pics of the boats being constructed. They omitted the bow breaker for ease of modelling but short cuts are not in my vocabulary. it is also difficult to visulise where all the stair cases go, so going online helped clarify this. I opted for a plank on frame construction covering the hull with a single layer of fibreglass and using lite ply and plasticard for the cabins. The deck planking was marked out with pencil before varnishing. I also wanted the boat to be fully lit and both radars to be operational and counter rotating (looks better from a spectators point of view). Completion date sometime in 2015, watch this space!

Scratch built 1/48 scale Mersey ferry Snowdrop in current use on the Mersey (ex Woodchurch)
Model interiors fitted out with tables chairs people etc and 72 leds light to Illuminate the interior saloons.
Just completed and maiden voyage on Hoylake Lake on the Wirral.
2.4Ghz radio and a bilge pump just in case. Sails a treat with 100 passengers. Extensive use of plasticard on superstructure. Fibreglass hull from own mould.
See sailing location at www.hoylakemodelboatclub.co.uk
Our club can supply the hull if you want to have a go at building one.

This is my 1/24th scale S80 Schnellboot,it has a Metcalfe GRP hull,the superstructure is a mix of 3mm/4mm ply and 2mm plasticard,it has 3 x Graupner 600FG motors that have a 3.1 ratio gearboxes fitted,the props are 55mm witches hat type,and it has 3 x Electronize 30amp speed cont,it has a really good scale speed running on 2 motors but nearly jumps out of the water when all 3 are engaged,It was scratch built from plans,but not by me,I got it in plain grey,I did the paint job and added the crew,I sail her on a pond near to my home in Edzell,

Bought off ebay, where else! Had been started as a cruiser, with one very small electric motor,then put in a loft for goodness knows how many years.Replaced prop shaft with 2, 40mm r/h and l/h props, 2x 540 motors running through 40a esc.Radio is 27mhz. 2ch. would like to swap to 2ghz to get rid of the unsightly aerial! I am awaiting some plasticard windows to Improve the looks and will slowly add fittings as and when.I tend to sail it every now and again on the boating lake in BUXTON, no-one has shouted as yet,though I'm not sure the swans approve.!: The photo on the water was just as the power was running down, none as yet at speed.It is very manoeverable with the twin rudders,almost on the gunwhales at speed.

whilst being off work with cancer have spent three months building my polar trawler which I had to remake a lot of superstructure with plasticard due to the old ply delaminated. it has twin screws powered by two 400 motors and 40 amp esc and 6v sla. I think she looks quite good

Finally reached the end of my 'back to wood' restoration which started in November last year! She was a rather sorry ebay purchase but did have some of the original fittings - sadly not all, I used as many as possible and found new equivalents to try and match. The mast, davit and cleats were all home made in plasticard, brass and other sundry bits and pieces. it has working lights and spotlight and the davit rotates. First outing today was pretty good, it does plane but at nearly full throttle so the next trip will be with an 8.4v stick to give it a little more edge. Roger :-)

This is my second attempt at scratch building using a a grp hull. My first boat was an MTB/MGB built on a Perkasa hull as a semi-scale model. (see All things Rc - Power setups).
This time I have concentrated on keeping things lighter but it still weighs in at 2.5kg!
I have built without plans, relying on internet photos scaled etc using "Photo deluxe" and "Photo Express".
Virtually everything is built from plasticard apart from a 3mm liteply deck.
The dinghy is epoxy resin and microballoons, ths scramble nets are Lego!
Power is again courtesy of Graupner -2, Speed 600 8.4v using lh. and r.h 35mm props. Esc is one of those 50amp ones from the far east. These are far cheaper than the Viper Marine 40 used in my MGB, but slightly heavier and less sensitive at low speeds. Current drain (in the bath!) is up to 30A but this gives a superb on the water pace of an, estimated,8mph. Battery is a 4,600 mAhr NiMh.
(A true scale speed approaching 150mph plus).
I sail it on Ullswater in the Lake district and the Vosper Perkasa type hull shape is superb in the real waves that we get there, flying over the crests and taking aboard No water!
It really looks the part as my photos would show if I could learn how to load more than one! Can anybody help with this?

This is the Hugh William Viscount Gough. She is a solent class lifeboat. She went into service in 1963 as the Stornoway lifeboat. She was there for around twenty years.

She then went on to Barra and ended her service at Dunbar. She was sold in 1993 and is now out in Malaysia.

I have scratch built her from the hull up. She has a fibre glass hull and the super structure is made from plasticard. She took four weeks to build. I have some bits and bobs to do to her.

She runs on two MFA 850 torprdos, but I am going to down size to 800's.

We sail her at Mote park Maidstone most Sundays and also at shows.

She is 48" long with a scale of 1:12