Hi. This is my 2nd scratch built boat since lock down began. The first was the H S L 103 finished 6/7 weeks ago. Still waiting to be tested outside of workshop. This one is built on a fibre glass hull,and has a length of 44 inches and a beam of 16. My power plant is twin out runner motors purple power. 600kv, running through twin 70 amp ESC and with 4 cell 5000 amp lipos feeding them. All accommodation is made using 6 mm three ply. And every fitting you see on the boat was scratch built by me. Lighting system is 12 v grain of wheat .props are three bladed brass 45 mm by prop shop

This 'Whaleback' boat is a 1/16th scale Air Sea Rescue Launch that was built by a friend of mine Graham. It is powered by a Turnigy brushless motor and Lipo Battery

Working on this idea for a bit more refinement on the exhaust smoke idea. Graham mentioned these timers were worth a look, so I purchased a few from Ali Express for about 90c each. They work well for an off/on set-up but not quite as well for an on/off set-up. They are variable from 0-12 secs and have a lot of possible uses. I was trying for a puff of smoke at start-up (which in my application works in conjunction with the twin sound units (HSL and ST) and this initial test seems to work ok (bit of refinement with timing and air pump speed required yet). Already have the smoke going well but there's always a little morsel to add (ref Mr Creosote)

I'll be using the small 5A voltage regulating bucks in the models (the ones shown are just for testing) with one 2s LiPo running 2 regs,- one for pump, and one through the timer for the smoke pen. You can see the timer working with no input from the TX in the vid, When fitted, both will be switched on/off simultaneously with the solenoid 'latching' power on/off, circuit (thanks to Graham for the layout) using the left stick.
JB

Joysway ARTR Mad Flow running on 3S Lipo at Stevenage MBC with on-board GoPro camera

This is a first try at a simpler quieter smoke unit. I used the smoker box/element off the Heng Long tank/car smoker unit with a 40x40 5v fan (the fan being voltage controlled by a 5v UBEC and the lot being run by a 2s Lipo (with a y splitter for the fan UBEC and the element using JST leads. Doesn't smoke that well as I had broken then repaired the element previously, but the other one I have smokes a lot better, and has a better type of element (possibly a newer version) Some photos etc on the smoker discussion. Unit is almost silent (the noise you hear is the camera and outside noise, as the window was open)

I found this hull at thingiverse last year. I printed the hull from a local shop and rest was handmade.
Firstly I bought a 2426 4200kv brushless 2-3s which was too powerful and too heavy for the boat size. The length is 38cm.
And the 30Amp esc was also too big for it's size.
After that I tried small 180 brushed motor with 20A brushed esc w/brake. it was perfect (still it's heavy😂).
The bridge and deck is made by 1.75mm pvc,torpedos are made of wooden pencil.
Small battery space takes a 2s 500mah lipo. 30mm 3blade propeller.

YouTube video link is here:

British Power Boat 64 ft RNZAF HSL scratch built 36" R/C model with twin systems including sound. Brushless 2000kv w/cooled (pump) in-runners, 30A car ESCs, 2200mah 2s LiPos remote lights etc. Started off in 1940, new with the RNZAF and had many modifications over the years till decommissioned, including machinery reduced to twin 671 Greymarine GMs (from the original 3x 500hp Napier Sea Lions) which were finally removed around 7yrs ago and replaced with a single 650hp GM Detroit 8v92T1 (still does 20 knots in its latest configuration ! - see this on the photo gallery of this model) This boat is in far better condition than the ex Phil Clabburn restoration of HSL 102 (he didn't have much to start with) and the hull has never had any major rebuild apart from being glassed to the W/L. Even today there is no way most people would pick it for 80yrs old. Those hulls never age! (ie some of the beautiful 'Whale Back' conversions still around)

Boat is Scratch built 36" British Power Boat 64ft High Speed ASR Launch which belonged to the RNZAF. The launch was one of the 22 built and was shipped to NZ in 1940. it was the only one of its type in the Southern Hemisphere. Model has twin motors, ESCs, sound units etc. Has remotely switched water pump for water cooled brushless 2000kv in runner motors and remotely switched lighting. Uses 2x 2200mah 2s LiPos for drive and 1 1800mah LiPo for the pump (also a separate battery for the LED lights. Boat is built with strip planked balsa on ply frame and fiber glassed. Deck is ply, wheelhouse is varnished balsa. The colour is as it was for most of its time in the RNZAF . Took about 5 years on and off to build and finished it last year. (please ignore the time date - can't get rid of it .

This is my scratch built 36" RNZAF British Power Boat 64' HSL (arrived in NZ 1940). I actually went on board this vessel in 1968 when it was still in original form (the RNZAF having disposed of it in the 50s) This vessel is still around and has been recently re modelled (2nd time since early 70s) and I was lucky last year to have met the present owner and go on board (2nd time in 49yrs!)and take a few photos. The vessel was modified a number of times by the RNZAF over the years (air intakes, removal of the fore deck machine guns, wheelhouse turret etc so I sort of went in the middle. I found a few drawings of the type in an old mag which had side and top views plus the bulkheads and their positions, so I took them along to a copying shop and kept enlarging them until I had the desired proportions. This worked out quite well and using a few methods from other models I had built, managed to frame (ply) the hull and then fully strip plank it in balsa. it was then fiber glassed. The deck is ply, lined and varnish stained. The wheelhouse is varnished balsa with the top removable for access. The wheelhouse interior has detail such as controls, instrument panels, skipper, steps to wardroom etc but is not too detailed as it is not seen. The boat has full lighting by remote switch, lights are all LED.
The propulsion side has dual everything (motors, ESCs, sound units), would have had 3x but ran out of space! Motors are 28mm 2200Kv water jacketed in-runners (cooled by remotely switched pump) using 30A Chinese ESCs (have 5A BEC, Fwd and Rev). Twin sound units are 'GT Power' car units which have around 40 different sound selections, from Cosworths to diesels and are computer programmable (as well as manually on the unit ) for various functions. I am using one of the v8 sounds (8 cyls short in my application) which I think is as near as you are going to get to 3 Napier Sea Lions (for which there is obviously no sound available) They 'start' 'Idle' and are fully proportional in fwd and rev and can sound quite realistic (will attempt to put up a vid later).
Batteries are 2x 2200mah 2s 20c LiPos which will last around 2hrs at least of sailing (they also run the sound units) Still have a few small things left to do (have just made wheelhouse air intakes) but don't want to get too fiddly. Just want to keep it a practical model.

Built originally in 1973 from a modav kit and powered by an Enya 35bbiii. Now running a 3548 brushless motor and 5800 3 cell lipo. Model in video was running an x35 prop with /- 20 degrees of rudder, very sensitive on turns. Today's run was on x40 prop considerably faster with reduced rudder throw of /- 15 degrees. Current draw was 30 amps max watts 376. Still too sensitive on turns.

scratch built, with out board motor,2 blade prop, 30 inche long, still need to install nav lights, chairs are from doll house, runs on Lipo battery, runs and turn excellant, and no that is not a beer in his hand it's a bottle of coke

I fist bought the plans when I was about 12. 50years later I decided to build the boat. it took me about 6months to build. The plans are the original Sufury but with a few changes. The cockpit is similar to that of a cigarette boat, extended the length and added a duck board. The power plant is 2100kv brushless moter, a 120amp speed control, 4mm flex sharftwith 2 11.4volt lipo batteries. in a straight line the boat is fast, but she really leans over when turning. Such is life is fun to drive.