almost at the end of the build, action sound unit to go in next

my new build tamar,great model from speed line,highly recommend it to anyone

Built out of house guttering to a scale equivalent to model railways HO the layout is approx. 4 x 3 ft. Mounted in a wooden frame and provided with a protective see through cover it fits into the car and can go anywhere. it has been an on-going project to build RC boats to suit. Those used at present are commercial products (loa 5" (125mm)) with simple two channel two prop drives - not proportional but with forward and reverse and by operating one or both props plus reverse steering is OK. Battery life limited to 6-8 minutes with similar recharge time. Built largely from scrap and odds and ends the project cost well under £80. The idea is/was to have several units and link them together to make a large layout!

Built for the MMI Solar Boat Challenge a number of years ago and includes the winner (Amber Sol-air !) that had to complete as many circuits as possible of a canal system constructed out of household guttering in a fixed time. (the gutter naturally limited the size - loa, beam and draft). All built out of depron from my own head - with enough left over to build several more ?!

There are a number of ideas for propulsion - all powered by solar panels, no batteries. The pool is 12 feet diameter and great for boats of this size.

As she is still, today preserved as new, I have enough drawings to build an new (full size) Arun,
she is currently in Wells Next the Sea, Norfolk.

this is my new project of a tamar 1/12 lifeboat,a fantastic kit to build many parts to make up from brass and other bits,its very rewarding

HMAS Fremantle (my first build and is still a work in progress) is a semI kit, hull and some fittings were supplied, most parts have been scratched built. She is powered by two MFA RE-385 5-Pole DC Motors, each controlled by a Mtroniks MicroViper Marine 10 ESC, supplied by one 6V 3.4 Ah lead acid battery, she has a running time of approx 90 minutes on the lake.

This model was built from a model slipway Tamar kit. it was modified substantially.all rails are soldered brass. info was from the website of Peterhead R.N.L.I. Station were there are excellent photos. The models engines are thumper motors 4240' at 900kv and run on three cell lipos @ 5000ma. Which give me at least an hour. With a speed of at least 10 mph, which lifts her bow out of the water,way passed the bow thruster , which is a graupner 400. Radar works through an old servo . Flashing blue light on mast. Running and accommodation lights. These boats are normally red below waterline however Scarborough life boats have always been white below the waterline. The crew are star war figures modified with plastic putty and a sharp knife. Not an easy build but very enjoyable. Eric Plaxton was the chairman of plaxtons coaches, and platoons building services. He left 9 million pounds to the boro of Scarborough, and 3 million to scarborough R.N.L.I., for a new boat .

Lady Wooes, by Mobile Marine of Lincoln. SemI kit. I bought the hull all the timber and drawings along with dozens of white metal fittings ages ago, started it and left it for 5 years, moved to North wales and finished it. Drive is 2 Ford Cortina fan heater motors driving a pair of 55mm Prop Shop props by tank steering, reciprocating steam engine sound board, smoke unit and full working lights all from 2 X 12 v 7 Amp batteries........a good and interesting but very frustrating build to get things right.
Sailed at Erias Park, Colwyn Bay Model Boat Club and sometimes at West Shore LLandudno.

this is a small selection of tugs that I have built in the last few years, I have been building model tugs for about 45 years and have many pictures of them if anybody is interested the first is Ionia at 1/24th scale scratchbuilt,then 3 Sun tugs all at 1/24th scale

J. R. MORE - LAST OF THE LARGEST STEAM TUGS BUILT ON THE CLYDE. The best looking tugs ever built!

This model is scratch build at 1:48 scale of the SAR&H Durban tug J. R. More, which was the last large steam tug built on the Clyde in 1962.
It took over 2 years to complete this model, which was my first scratch build from the modified plans of a sister tug called the F.C Sturrock, which was also stationed at Durban as the shift tug for that harbour. Other tugs of the class were also stationed at Port Elizabeth and Cape Town.

The J. R. More was the newer day tug in Durban, most often used to service the Union Castle ships and others in, out of Durban and remembered by so many visitors to South Africa of that time.

This model tug on the water has differential motor control, software linked with the rudder, can go about on the spot and a delight to sail as a model, capable of 6 or more hours on the water. Working Rotating Radar, lights and woop-woop sounder as per the original tug. I would also like to install the Telegraph bells, however these would drive fellow modellers to distraction, as they were a very distinctive sound and very regular, Implanted and well remembered by the crews and those in and around the harbour, even today. The engines on the other hand were almost quiet and by all accounts very reliable.

This model is ballasted mainly by two 7 Ah 12 Volt SLA Batteries for the main drive motors and a 2 Ah 12 Volt SLA (Aft ballast) for the Lights, Radar and Sound unit. All up weight is 14Kgs and capable of above scale speed from the two MFA 6:1 ratio Geared Motors driving two 4 bladed 70mm screws.

This model has onboard charge regulator circuit, built-in minature dual volt meter to allow quick on-board voltage inspection and single plug-in charge and regulator socket for charging all 3 Batteries together.

The actual full size J. R. More tug still survives and can be visited at the Durban Maritime Museum in Durban, South Africa. Local supporters are undergoing essential repairs, restoration and preservation with private and company financial support.

J R More is the only surviving large steam tug left of this class and as Important to the skills of the Scottish shipbuilders of the Clyde.

Well, it took 24 years of "on again-off again" building but now its finished. I started the model the day we put the CAMPBELL in commission(I'm a plankowner) in 1988.The model measures 6 feet in length and is scaled at 1:48. The entire model is scratchbuilt from wood (hull, superstructure, deck) and few commercial parts were used. it's powered by two Dumas 12 volt motors as a direct drive system. I had hopes of adding working features such as lights, rotating radar antennas, articulating gun, working anchor but I was just happy to get it finished! it will probably make at least one run at the lake come springtime but the models ultimate "homeport" will be a museum, at 6 feet in length(and 40 pounds of ballast) it's a bear to handle just to get it into the car for transport. Still, I'm happy with the results, it was a model of a lifetime(but I'd never build another one like it)! 😉