Built by Buxton Model Boat Club member Adrian , he says :- "essentially the paddle boat is scratch built but uses some fittings and materials from a Disar "Vanguard" kit ".
Adrian used drawings of "Flying Scotsman" for inspiration, but is not a faithful reproduction, although "Old Trafford" is also quite similar .
This was the maiden voyage so plenty more work to be done on detail and ballast etc.as the boat still sits a bit low in the water.
For reference see :- http://tynetugs.co.uk/
http://www.tynetugs.co.uk/oldtrafford...

Seen here at Buxton is - 'Ellipsis' an International One Metre Class yacht .
Built from lines drawings purchased from the designer Frank Russell.
Neville hand laminated the hull in epoxy glass, and the fin and rudder in epoxy carbon. Hull finished in cellulose paint.
Information provided by Neville Black.

This is a 1:100 scratch build of an (unnamed) Fort/Park class freighter, based on Jim Pottinger's drawings of a North Sands design. I'm building this as a DEMS ship. it has smoke and an overboard water discharge (if it works!).

These ships were built in many Canadian shipyards during WW2. Some went to British Admiralty - with Fort XXX names - and some went to Canadian government - named for Can. parks.

I haven't yet decided on the name for this model.

This is my scratch built 36" RNZAF British Power Boat 64' HSL (arrived in NZ 1940). I actually went on board this vessel in 1968 when it was still in original form (the RNZAF having disposed of it in the 50s) This vessel is still around and has been recently re modelled (2nd time since early 70s) and I was lucky last year to have met the present owner and go on board (2nd time in 49yrs!)and take a few photos. The vessel was modified a number of times by the RNZAF over the years (air intakes, removal of the fore deck machine guns, wheelhouse turret etc so I sort of went in the middle. I found a few drawings of the type in an old mag which had side and top views plus the bulkheads and their positions, so I took them along to a copying shop and kept enlarging them until I had the desired proportions. This worked out quite well and using a few methods from other models I had built, managed to frame (ply) the hull and then fully strip plank it in balsa. it was then fiber glassed. The deck is ply, lined and varnish stained. The wheelhouse is varnished balsa with the top removable for access. The wheelhouse interior has detail such as controls, instrument panels, skipper, steps to wardroom etc but is not too detailed as it is not seen. The boat has full lighting by remote switch, lights are all LED.
The propulsion side has dual everything (motors, ESCs, sound units), would have had 3x but ran out of space! Motors are 28mm 2200Kv water jacketed in-runners (cooled by remotely switched pump) using 30A Chinese ESCs (have 5A BEC, Fwd and Rev). Twin sound units are 'GT Power' car units which have around 40 different sound selections, from Cosworths to diesels and are computer programmable (as well as manually on the unit ) for various functions. I am using one of the v8 sounds (8 cyls short in my application) which I think is as near as you are going to get to 3 Napier Sea Lions (for which there is obviously no sound available) They 'start' 'Idle' and are fully proportional in fwd and rev and can sound quite realistic (will attempt to put up a vid later).
Batteries are 2x 2200mah 2s 20c LiPos which will last around 2hrs at least of sailing (they also run the sound units) Still have a few small things left to do (have just made wheelhouse air intakes) but don't want to get too fiddly. Just want to keep it a practical model.

When I was in high school back in 1957 I built a kit of the Comet Gypsy Sloop Jr. in 2016 I found the drawings on-line for the Gypsy Jr. The boat was entered in woodworking class at our county fair where it received a blue ribbon. it has a working wheel that turns the rudder. Now I have under construction a 32 inch version that I would like to radio control. I'm not too sure how to set up or what type of servo to install.

e Hector Read was built in Hull in the 60s for the Gt Yarmout port and Haven as their new Harbour tug to be moored at the pilot station in Gorleston. Giving many years service, was finally sold on when most working ships were fitted with bow/stern thrusters. Much missed as part of the river scene. A scratch built model I made 18 years ago from photo’s and drawings from the Port Authority. Anyone know her ultimate fate?

Here is the last of the Lowestoft sailing trawlers. Model built using working drawings kindly supplied by the Sailing Trust. Model about 12 years old. I got a little carried away on detail! As expected she sails and handles well as all the old work sailors do.
Drop keel and rudder extension added when sailing. I was intrigued to discover that the deck winch was steam powered,no doubt to help with taking in the trawl net.

a 30"scratch built pt. boat, I built hull from .8mm ply using a resized eezebilt 20" plan.
the deck fittings were copied as best as I could from photos and drawings found on line. powered by 2- 2200kv brushless out runner motors through 2 20 amp speed controllers. twin contra rotating props twin rudders fast and light a pleasure to build

2

This is my replica model of the Sirius Star designed by Max Coote of Ripmax, around 1954.
I found the drawings on the internet, and built the model from scratch. The boat is 41" and I have fitted an electric motor taken from a childs ride on car, 50 amp Chinese controller, 50mm prop, and 12 volt 7 amp lead acid battery.
It also has a Murco diesel fitted in the wheel house to give the boat a 50's appearance!
Sea trials soon!

Scratch built 2016 no plans built from ships drawings and paintings.Twin props Maiden at Llandrindod Wells lake 20/8/2016.Ps nearly lost it bilge pump accidentally switched on drained battery thankfully got it back just. 😯 😰

please find afew more photos of my boat this boat was scratch built to scale from original drawings my uncle and my father had this boat built in albert palmers in portavogie1948 was used seine net fishing and fishing long lines in north channel next project is model of my own trawler hull is in photo rgds skiboo

Sometime around 1968 I found a small set of drawings, about A4 size, for Sct. Knud in (I think) Ships Monthly. So I enlarged to 1:32 scale and made my model plank-on-frame with GRP overcoat. She is powered by a 6V Pittman motor driving a self-made scale prop and 2:1 gearbox. Steering is effected via chain and quadrant as per prototype! Everything bar the anchor, anchor chains and steering chains is self-made using a variety of materials (brass, plastics, 'Perspex', and copper electro-deposited cowl vents). Recently I fitted her out with LED lights: interior, navigation and working. One might notice that I abhor a working boat looking like "Daddy's yacht" and so I apply custom dings, stains, oil spills, scratches, wear and tear to my tugboats 😀 My Knud runs as well today as she did 45 years ago and in all that time has only needed one repair to her gearbox!