Ahoy
Here is a display model I built it is the late great RMS LUSITANIA scale 1/350 built for show only it took me 7 months to build a one of a kind kit something you don't see everyday built from a kit mostly scratch built did not like some of the kit parts so I made my own.

Another loft find. Bought for £15 as a very delapidated static model. Converted for RC. Many new parts required and complete repaint from deck up. Up for sale as I have too many boats. Sorry you are to late the boat has been sold.

Cheap buy as it had been in the loft for years.
Most of the glue had failed and many parts lost. Totally resprayed or hand painted from deck up. Powered by to monoperm motors. Now finished it is up for sale. Now been sold.

This was a precedent 49 inch kit that I made during last year. I wasn't at all Impressed with the kit. The precut plywood parts were cut with knife blade tools and the tools were obviously past their sell by date. The shapes were very poor. if I make another kit I will make a point of looking for a laser cut hit.
Having said that I am pleased with the outcome.

HI all this is my Nor star fire boat saved from ebay. From what I can tell all parts needed to finish are there. I do have the half scale plans but no build instruction. if any one can point me in the write direction I would be very gratefull. Thanks pete.

Greetings from Hollywood, California. 😎 Many thanks to David Metcalf at Metcalf Moldings for his advice and for so graciously replacing parts I messed up. This craft has been swimming pool tested (after all we're in Hollywood) and it ran beautifully. Next stop is the local pond. I chose brass counter-rotating props. Those are lithium batteries tucked under the sides. I chose to recut the decks out of wood. Brits rave about plastic but I found it difficult to cut and forget about sanding down the edges. (I guess if you cut it properly you don't need to sand the edge.) Major mistake: watching a You Tube video that told me I should make brass joints using a Propane torch. it will make a good joint but it MELTS ALL THE OTHERS. There was a lot of learning here for me and thanks to David's fine kit I think I'm somewhat of a better model builder.

This Flower Class Corvette should of worked out a great build (It cost enough) Once building I discovered wrong bits, bits missing instructions almost non existent, there was a diagram with everything numbered, but know of the actual parts had such numbers, but working almost blind what to you think of it...My second build?
Ship brought from Deansmarine.co.uk

My first boat...almost finished, need to install the motor & rudder

My second HMS Compass Rose...Deans Models, a ward of advice stay well away from this kit instructions don't exist, parts aren't all there some parts from different kits & to top it all cost me well over £200 to fix it

This Boat was bought as the City of ELY Merchant ship, I am in the middle of converting it into the SS John W Brown which was an armed merchant ship built during the second world war. This ship will now sail with the grey funnel section which is part of the Cygnets Model Boat club Maidstone
It has had a complete hull respray, gun platforms built along with new radio control parts and now lights

HI fellow model leers.this is my latest model.Built in 1926' for the Ffyfe(bananas) family. Originally it was run on steam,but in 1939 converted to diesel,this was kept until 1957 when all the staterooms were replaced by cargo holds . She was then made into a feeder bringing eleven thousand boxes from Rotterdam to Southampton. She was scrapped in the seventies.my model of her was from 1926 the scale is approx 1/30th her length is 48 inches including bowsprit, and has a beam of 10 inch amidships. She is totally scratch built, plank on frame, all the decks are individually planked with black card in between , wheel house and all other parts are mahogany. She runs on a decaperm geared motor @ 6 volts, and the lighting system consists of 10 accommodation lights, port and starboard , wheelhouse, and both mast headlights,the large saloon skylight is also lit up with a set of disco lights on a separate circuit. The funnel houses a heavy duty smoke unit switched on by switching unit.

This is a fun boat!
With a steam engine that really runs, it is quite a crowd pleaser.
The tank and parts are brass, and silver soldered together. The heat source is sterno, placed in the tray and Ignited. This boils distilled water in the boiler, which is vented to the piston. The hole in the freeboard is the "exaust".
I'll have to post a video of it operating.

Using a 3.7g micro-servo. it is possible to install this small unit within many of the existing model Radar parts or scratch built models to create a working model Radar setup.

Here is an example of one fitted to my RNLI Trent lifeboat. I am using the bottom of the servo housing to clamp this unit to the underside of the base of the kits Radar platform, this helped to reduce the overall height and to maintain the scale size.

These servos are available on eBay at £1.89 including postage from China or Hong Kong.

I found this easy to mount and I have kept the servo electronics, connecting this servo to a spare channel on the receiver. This enables the radar to rotated in both directs at adjustable speeds or just stopped. I usually have it adjust at slow : scale speed, setting this with the trim on the transmitter.

Photograph of working Radar installed into Trent RNLI model.