A vid of a few of us out at Towne Lake and Josey Ranch

Short vid of 2nd handbrake test with a 3kg load (simulating boat) works well, vehicle pulls it up the ramp no trouble, (end cut as cam batt ran out)

I wanted to try the driveshaft brake I'd recently fitted and thought I might as well do it on an actual ramp. This ramp has around a 30deg slope so it was a good spot for a test. Tried it with just the trailer first, (don't want my boat model disappearing down the ramp at high speed) and it worked well. I've done another vid where I but a 3kg water bottle on the trailer to simulate the weight of the boat, and that also worked well (although it's a bit scary when 13lbs starts rolling down the ramp backwards.

Lost the trailer a few times going over a big join in the ramp ( forgot the tow ball lock nut) so had a few goes to get it right. I was surprised how well a piece of string round the driveshaft could hold that weight so easily. Only negative is that it's not as good in forward, (would need another wound the opposite hand on the shaft) but that's not as important as reverse control. Still waiting for the weather and tides so I can try another launch. This ramp's not bad, but a little rough !

Some details of Thor. - by Dean Ratcliffe.

Thor is a freelance design of a multicat vessel. These rather unusual ships are real workhorses, designed as a work platform, often with a hiab crane. The square hull gives a large flat deck, with plenty of open space for a work area or for deck cargo. The design also enables the vessel to be used as a tugboat, either pushing or towing and are often equipped with large deck winches and strong points for this purpose. A true Swiss army knife of the sea, able to adapt to most roles, some even have additional internal fuel tanks for refuelling other vessels.
More info found on -
Model Boats Website - BoatClubs & Lakes - Buxton Model Boat Club

https://model-boats.com/places/60518

Just a little Hamilton Bay run of my scratch built R/C North Rock tug replica .The real tug was built in 1956 for the Alexandra Towing Co. Liverpool I took a little liberty in the color found out that the cabin was white & my ability to record with my I Phone & steer model ain't to good but it's a sturdy hull .

Two new additions appeared at The Pavilion Gardens lakeside recently - belonging to BMBC members.
The models were - "Bonnie Lass", and " Milford Star " from Caldercraft.

The Buxton Model Boat Club sail at the Pavilion Gardens lake on Sunday and Thursday mornings - comments being - "an entertaining spectacle for all the family" and - "a Valuable asset and attraction to the town" .

Model Slipway Model - "Maggie M" is a Fishing Trawler
Scale 1:32 L. 850 mm B. 255 mm Approx. 10 kg.
Built in 1990 by Campbelltown Shipbuilders Ltd (Scotland) MAGGIE M operates out of Scarborough harbour in Yorkshire, United Kingdom. The vessel is designed for twin-rig trawling and the aluminium shelter-deck is a cover over the fish processing room.

😭Video of my San Reno running around with a Graupner Kitty II and a semi scratch built tug on Towne Lake, was visited by Wile E Coyote too!!

Just built Krick RO-Marin Neptun. First tug I’ve built, she came out okay, I think. 6volt system, MFA 2.5 geared motor, Graupner SXM switch controlling the lights, older Pixie brushed esc controlling water monitor pump. Old Futaba MC210 for motor esc, Frysky QX7 radio. This video was shot at Towne Lake, McKinney Texas. She well on her maiden, needs about 2-4 ounces ballast in the stern though.

Hello !
Som more Pictures of my Fairmount Alpine , A little bit forward on the deck
propshaft and rudder is mounted
the towing winch is mounted and working
more
pictures is comming

// Have a nice weekend
all boat builders 👍

This ship was a lightship tender named "Coeur de Lion" that was armed and drafted into the Union during the civil war to counter blockade runners. This model is scratch built and is inspired by a paper model designed by Magnus Mörck. A sidewheel steamer equipped with the typical walking beam machinery, it was rebuilt to carry three guns. A line of iron plates along the gun wales added a measure of armoured protection. After the war it was returned to lightship service. On my model the paddles are independently driven, mainly because I have a Robbe Navy F14 transmitter with twin sticks. The walking beam is operated by a servo modified for continuous rotation. The original ship towed a barge that flew an observation balloon and could be described as the first 'aircraft carrier' the fifth picture shows the barge I have made - I hope one day to emulate the real thing by raising and lowering a suitable balloon. I have included some pictures of the rest of my paddle fleet.The 'Rachel Erin' is a freelance sternwheeler 'quarter wheeler' tug that uses a worm drive to the paddles. She does not steer well. The last ship is an enlarged version of Graham Goodchild's Santa Anna.

This is one of the limited edition Sirmar kits that was produce in the early 1990’s.this model was made by a friend of mine who’s a dockyard fitter and turner it was made about twenty eight years ago. Based on a tug that I worked on in and around Portsmouth harbour. This model has a working voith unit opening engine room skylights. Working lights, removable deck hatch to get at the unit like the real boat, the superstructure and gun whales are made from plasticard. The fender was made by a friend to the same type as used on the tug. The wheelhouse is copied like for like. The towing hook is copied from photos and slips like the real one. in all my years I haven’t seen another one like this . Sirmar made twenty numbered hulls as kits .