I built this boat was built as a tribute to my dad who built an original Sea Commander for my brother and myself in the 1960s, and is called Lady Kathryn after my other half.
The pleasure I had building and sailing this model has inspired me to to look for my next aerokit project.
Hopefully that will be the Sea nymph this was my first attempt at building.

HI Fellow enthusiasts
The first photo shows the boat as it was bought from an E Bay auction in late February for the price of 14.50, for that price I had to bid on it, even thought I had a new kit of the same model on order from a model shop from the end of December, before VAT went up. The models turned out to be the 4 feet versions some 11 inch wide and now is about 19 inch high. This model turned up several days before the new kit turned up, and was a bit worse for ware than anticipated as the deck had started to part company from the hull. After stripping the deck of all remaining deck furniture the deck was re laminated to the hull, prop shafts and rudder tubes also refitted using plenty of resin and cloth. A rubbing strip was fitted around the deck hull line to tidy up the visible damage. When I was happy with repairs the hull and deck was rubbed down and sprayed. Using the information in the new kit and some photos of actual boats, MJB's (My junk boxes) supplied all the required parts to scratch build 90% of the models fittings as seen, this includes the figures on the deck. These being obtained off an EBay site as 1/24 unpainted train scene figures that required some or may be a lot of adjustments to their appearance. Several items have still to be made and fitted. As I'm working on her sister boat P147, will make extra parts in one go.
The boat has twin electric drives, the motors, MFA 919D series, are fitted with their own 2.5/1 gearboxes and they drive 40 mm three bladed conta rotating brass props. They have independent 15 amp Electonize speed controllers run from two 7.2 volt packs in series. The switching arrangements for lighting has still to be finished off. Don't know if I'll fit a sound system as the boat is for my grandson.
The boat has had several trips on the Society's water at Cwmbran with myself and my grandson at the helm. it seems to go fast enough for him. (The new boat P147 has been built with triple screws.) Can't wait to see both models on the water together.
Hope you have enjoyed the pictures and information.
Regards
GreyWolf

HI Fellow Enthusiasts
These pictures show my scratch built RAF Air Sea Rescue launch 2507. it was built using my own scaled up planes over the period July 2006 to August 2008. its approx. 4 feet long by 11 inch wide and stands 24 inch high.
The boat has twin Johnson brushed electric drives via 2.5/1 reduction gearboxes with three bladed 40 mm brass props. The speed controllers being 15 amp Electronize supplied from 4.5 amp D cells made into a 12 volt battery pack.
The boat sound system consists of a Diesel sound generator and machine guns being fired by an electronic ring counter circuit that allows the guns to fire individually or together depending on their selection via a diode network. The unit is switched on and off via a Electonize switch unit that also switches the boats lighting system on and off.
All the special fixtures required for this model being self made this includes the figures found on and in the boat. The basic figures are usually obtained from car boot sales or the local ÂA£ shop for next to nothing and then modified to the model boats requirements.
Launch 2507 was commanded by F/O W. Garret who reputedly made the most northerly pick up on the 26th June 1944 for the crew of a downed Catalina, for this action he was awarded a M.B.E. The Catalina pilot F/Lt. Horner R.C.A.F. died of exposure and was awarded a posthumous V.C.
I hope you enjoyed the pics and information.
Regards
GreyWolf

HI Fellow Enthusiasts
Photo shows my RAF crash tender in the colours as it was when first built in 1956/57 from a kit. (Red tops like all fire engines, well I was only 9 at the time.) This photo was taken at lakeside in 1993 when I first joined the Cwmbran Modelling Society. The Second photo shows the boat on display at the Portis Head Open Day event in 2000 several modifications taking place to the overall look of the boat. in 2008/9 I decided for it's belated 50th. birthday to revamp the model and bring it closer to the real thing. Damage to the woodwork being repaired and a colour scheme close to that of the real boat being applied. Several new deck fittings being made along with new window surrounds made out of plastic replacing the cardboard ones fitted in 2000. New decals and correct flag also fitted. The model was entered in the 2010 society Chairmans Comp. winning joint first place with one of my other models. Photo 4 shows my model as she is to-day repaired once again ready to sail, after hitting some Ice over the christmas period 2010 resulting in a hole in the bow that almost caused her to sink.
The model over the 54 years it's been around has been fitted with single and twin electric drives and to day it has a single johnson 550 brushed electric drive via a 2.5/1 gear box run off two 7.2 volt racing packs in series. The torque generated being too great for standard plastic props resulting in me using 40mm three blade brass props. The motor controller is an electolize 15 amp unit and I also use one of their switch units to activate the water pump for the scratch built water cannons. The water pump being salvaged from a 1960's car washer system and still goes to-day.
Hope you enjoy the pic,s as much as Ive enjoyed this model over the last 50 years plus.
Regards
GreyWolf

bought this 50inch hull off ebay and thought I would try a make a boat just with my own idears and this is how it turned out,powered by a 720bb motor,12inch propshaft and a 60mm 3 blade brass propellor.all built from odd bits of wood in my shed. installed wood in bottom and then filled with a two part epoxy resin

rudder was bought from ebay but was not big enough so took it to bits and made it bigger with copper plate and then soldered

installed deck fittings made brass handles from brass rod

installed motor,radio gear and 15amp vipor controller,windows hand made mast and fittings

further pics of build and painting made seat and wheel installed dials from beccs decals

Purchased from ebay and as you can see the boat has many problems paint peeling middle roof missing engine seized rudder Broken, but on the plus side the wood is undamaged. The boat comes from the original owner who built from a kit in 1964 And kept in his loft for years, I will post more pictures as rebuild progresses.

here is my scratch built HDML ALL GUNS AND all other deck items life rafts and splinter mats all scratch built

Ahoy
Here is another of my RC collections this the Revell of Germany Corvette SNOWBERRY. My spouse got this kit 7 years ago for my 64th birthday. I never got one of these before I know that Matchbox made this kit and went out of buisness. in overal view this is the Matchbox kit. I was overjoyed when my wife present this kit to me.After opening the kit examining the contents in the kit the hull comes in four peices two bow sections port and starboard. Two stern sections Port and Starboard.. To my horror they gave me two port bow sections. all there to do is to email the company and filed a complaint about the problem but it got worse. with the instruction sheet in my hand I gave them the part No. I need the Starboard bow section 2 weeks later they sent me another port bow section now I have 2 of them. This time I gave them a piece of my mind, I finally called up the company and filed my complaints. they were very humbled over this and they opoligized greratly. 3 weeks later a UPS truck pulled in. the driver approached my door with a huge box and a package I wondered with excitement whats this of. They sent me a new kit and the starboard bow section. What a del of the century, you dont see that no more.

As to the kit a modlers delight this kit is loaded anyone who has built this kit will share the same experince to the attention of detail. the hull length is 36 inch,s scale is 1/72 there aree plenty of room for your RC gear it to can make a good static model as well. Mine is powered by a dumas 6.0 volt electric motor with speed controll. 2 channel system. to make a stronger model for RC opperation use epoxie. The hull comes in 4 sections leaveing no seams to fill. on back of the instruction sheet they give you a selection of color schemes and ships names. I like the north Atlantic color schedule. So I modeled mine as the Snoewberry. These kits still can be purchased I see thgem all the time on ebay.

Boats