I guess this is a working vessel?? I wanted something for my TID to tow and after a bit of searching I found a plan for an old Ezi Bild Kit on line and got it enlarged and this is the result.
It takes about 15-20kg of ballast but it tows well.
Here are a couple of pictures one on its maiden "tow"
I remember when they used to race them! They had two men stood at the sharp end with huge sweeps to row them along near Tower Bridge. River men used to be a different breed.
Roger
That's an excellent running time for a fast model.
😀
It gives a great indication of what can be achieved with brushless motors.,
I'll have to try brushless motors in some of my fast scale boats. I only have one brushless powered model at present, this being the Proboat Blackjack 29 fast electric.
This is a video of my little Toby Tug (a seaport workboat in a previous life) very generously given to me by Bob Hutton from Stourbridge Model Boat club. it's shown at Bournville Tug Day yesterday (5th June 2016) on a Tug Tow of a 10 ft tanker - two small tugs giving it a try, when calamity - the front Tug got swamped by another (not very well-behaved) passerby and capsized - leaving Toby to pull both boats back to shore.. Enjoy!
Stirling was one of the last generation of Rescue & Target Towing Launches built for the RAF and were designated Mk 3 RTTL and were delivered in the mid 1970's. The model is 1/24 scale and is 39inches L.o.a completed November 2015 from donated hull, all else is scratch built. twin 555 motors running at 12v with 2 x 6v 4a sla batteries in parallel, gives a good scale speed, and has about 45min endurance..
Guess most of you have heard of the Khetanna, Jabba The Hut's sail barge from Star Wars. I looked around on the net and to my big surprise, the search engines did not spit out radio controlled versions of this model. Which made me think, and then decide to built my own.
It is scratch build, based on a "scudder" hull, a design by Glenn G. I printed a few pictures of Khetanna from the net and used those for guidance in the process.
The superstructure is a combination of balsa and ply wood. in the Star Wars tradition, the boat is propelled by a jet propelled engine. To finish it off, a Lego version of Jabba was added for extra detail.
It was a fun and fast project to built, maybe a dozen or so evenings.
(scratch) building is my passion and only sail the boats with my son about once a month. We've got a pond near Newcastle (AUS) harbour which is pretty good (providing there's no weed in it) but the disadvantage of this pond is salt water, meaning a proper rinse of the models is needed after each sailing session. Recently we have moved our sailing sessions as well to the liberty pond in town. The model captures the audience, the vast majority recognize the Khetanna immediately.
Happy sailing.
here are some photos of finished project on the water at pickie pool bangor she is powered by 540 motor and 60mm prop winch radar lights al in working order she tows the net well stacks of power
this boat is scratch built inc winch rgds Robert waterson angus
Northsider built from a Tyne Model kit
History M.T. Northsider & M.T. Ironsider:
Completed April 1967, at Richard bunston Hessle for the Lawson
Batey Tug Co. Ltd., at a cost of £106,500. Then chartered to the Tyne & Wear Tug Co. Ltd., working on the Tyne for harbour towage. Also visiting other UK and European ports during many coastal tows. After a long and eventful service on the Tyne, sold in 1996 to BaltagI Pilots in Bahrain and renamed 'BaltagI 6' there it remains in service today. M.T. Ironsider Completed September 1967, a sister ship to the Northsider, also chartered to the Tyne Wear Tug Co. Ltd., until 1992. Then sold to Proodos Maritime Co., Piraeus and renamed 'MegaloharI 12' still in service today.
Both tugs are similar to Alexandra Towings Tug, 'Sauria' which, was based at Felixstowe, UK. .
Found this Dense block of foam, floating in local Ashton Canal, whilst sailing other boats with my brother, whilst rescue a stuck boat from the reeds, in 1996 was temporarily on the dole at the time, struck by her Landing craft shape on turning it over plus realised I could carve it like wood, later using my bits box, after carving a couple of box shaped groves, for battery, motors and rc equipment, literal rammed a prop shaft, and rudder shaft through hull, and fashioned some balsa sheet into superstructure suitable camouflaged , I had a "US Army Vietnamese River Craft" of sorts and with its 1 1/2 to 2" thick Hull virtually unsinkable, hence its name :-). Here she is in 2000 sailing at Ethrow Park. May in the future alter her superstructure, she makes a handy towing barge for both mine and my brothers Tug Boats, and if rc left connected can even act as rescue boat if they pack up or get weeded up :-) - Have delete this from You Tube and replaced with slightly clearer version, but it seems to be still working here mysteriously, may cease working eventually, new version above :-)
These two models were of the Liverpool DUKWs operating around the Liverpool dock area and city center until they were withdrawn due to a couple of sinkings in the dock. The Queen and Prince Philip both travelled on one of them, fortunately there were no mishaps on these trips or the organizers would have ended up in the Tower of London.
The models are of different scales and built from photos only.
Due to the demise of the real ones I decided to sell both of mine.
Fighting Cock was one of the fleet of North West Tugs (Liverpool Screw Towing and Lighterage Company) steam tugs, built by Cammell Laird in 1953. The model is built on a Kingston Mouldings Sun tug hull, the superstructure is scratchbuilt from styrene, with many fittings from Mobile Marine Models. The motor was 'rescued' from a mainframe computer data drive, and is direct drive to the propeller. Power is from 12V gell cell batteries with a speed control by EA Electronics. Both hull and motor were given to my father many many years ago, and the model was completed approx 7 years ago.
