Scratch built some years ago, powered by 6volt PB battery.
She was always very slow and hard to manoeuvre. She was made from MM plans. I could never get her to behave in the water. 27Mhz TX/RX. tried changing motor, prop 6 to 12 volts nothing seemed to make much difference, gave up in the end. You can't win them all.

Hi!
This is a scratch build from plans, of the "Angel's Gate II" , at the Los Angeles Maritime museum. This example has a bilge pump, diesel horn, and will be adding a fire monitor. My nephew is pretty excited about it, he is 4, and already has been practicing with the transmitter!

HI this was my winter project the hull was given to me by my son who got it at a car boot sale it had been on fire as it was driven by a petrol engine in now has twin brushless motors with 45mm props but going to put 50mm props on when they come as it needs a little bit more speed Built from a set of plans this my first go at this as I build from kits in the past cabins made out of 3mm/1.5m ply and some 1.5mm balsa wood . Hull was sprayed and the deck and cabins brushed with enamel paint.

This model of the tourist attraction in Liverpool a few years ago.Sadly after a couple of mishaps all four have been withdrawn from service. The model however survives. it was scratch built from photos and site visits by myself (Max Ferrie).There were no plans available. it is about 28inches long and roughly 1/12 scale.It was built almost entirely from plywood. As you will see from video it operates on land and water. it is six wheel drive using differentials on all wheels. When in water it is prop drive. it has two small electric motors for power, the wheel drive being very low gearing (too low really it goes very slow on ground). it was completed in 2010, and is filmed sailing at the portable pond at Toys For Boys in Waterloo in 2010. it has sailed at Hoylake MBC also.
It is powered by two 6volt 4AH batteries in series to give 12volts.

Just finish this Dumas kit. About 20% is scratch built. I found the plans weak and the instruction booklet useless.

Scratch built from own plans using mainly balsa with some ply, brushless motor, best speed up to now 43 mph, hoping to get it up to 50 mph.
Hope it does not live up to it's name 😁

Alan

Following the legendary Keil Kraft Eezebilt plans for a Mermaid Ocean going boat. Plans exploded to 200%. Trying to build it completely out of Plywood and Foam Board.

OA Length 710 mm, Beam 180 mm. AUW 1.98Kgs.

She carries the name 'JAYSHIL". it is a portmanteau derived from the names of my late parents.

Model features working lights as prescribed by the international Maritime Authorities:

http://www.bosunsmate.org/seamanship/lights.php

In keeping with Rules 22 and 23:

http://www.bosunsmate.org/seamanship/rulesoftheroad.php#rule23

Brushed 550 motor, Reversible ESC, 2S LiPo, Turnigy Blue Prop, Working Lights and indigenous Sound Generator unit.

Video is available here: (you may need to turn down the volume a bit as the horn is rather loud)

I would welcome any queries and/or comments on this build.

Thanks and Regards,

VC

Following the legendary Keil Kraft Eezebilt plans for a Royal Air Force Crash Tender boat from the 1950's.. Plans exploded to 130%. Trying to build it completely out of Foam Board.

Completed model should be around 27" in length.

This is my scratch built inshore fishing boat, I adapted the plans from a model boat mag. The hull and deck are planked using cut up blinds from Ikea (they are made if Lime) it has working lights and radar via a 4 way switching unit on one channel, the working winch and trawl net are worked from another channel. Powered with an 18v drill motor working from 12v lead acid battery

Just a few photos of my first scratch built model. Although it is supposed to be a simple model to make (according to the plans) I am finding it to be quite a challenge.
I am sure my experienced Club members (CADMBC) will pass on advice when required. Ian

Scratch built from plans in 1989, will come out of retirement in a couple of weeks after getting a good overhaul.

Steve

Does this one qualify? it took me almost 4 years to build this one. Scratch built from underhill plans. Parma made the fastest single journey in 1933 of 83 days in the grain races. the model is on permanent display in the Maritime Museum in Hull UK.