build from a president kit with battlecraft armouments twin 1400kv motors & 90amp watercooled esc 11.1 5000mah lipos

Finally managed to put a little film together of my 1.24 Grey Goose taken at the Herne bay regatta. As well as the usual turning guns, lights and ship sounds this boat fires working torpedo's using a CO2 gas system. Will be putting some film of this on youtube shortly.
If your interested I'll be exhibiting at the Southern Model show this weekend and will demonstrate the torpedo system at the show. Hope to see you there.

this is a Peter Wiles Composite Marblehead moulded in glass/ carbon fibre cloth it has a beam of 193mm with a moulded deck & raised foredeck it can take a swing or shroudless rig this one is on a swing rig 3.4kg ballast draught 620mm

Sailing at vicar water models my local club ,needed a little trimming but it sails well in most conditions

Naulantia hull converted to Bermuda rigged schooner

This is my newest project an Ebay buy of a delapidated HSL possibly used to advertise Model boat insurance at some time maybe 50 years old !. I have removed all broken, out of scale and incorrect items, removed old repairs and internal engine mounts. Superstructure is not too accurate but good enough to keep. I have noticed the keel is slightly twisted so will have to try and rectify that and the rear deck is going to be removed also as the adhesive is soft and pliable and there is no rigidity in the build aft of the superstructure. I intend fitting 2 x 12v johnson 600 type brushed motors as the original had 2 props. I have plenty of photos of the external layout but lack any detail of the open bridge 😟 . I think this will be a difficult project to complete hope I do it justice

This is a 30-inch static model of the trawler that had suffered damage and had most of the deck fittings missing when I got a hold of it.
It was 'de-constructed' by Victor Marcham of the Mablethorpe Model RC Boat Group. Being a static model, it had to be bored through to fit a propshaft, a motor and rudder, and had new decking, mast and working LED lights.
It has yet to be weighted so pond trials can begin.

Been out of the hobby for about 10'years and started bilding the model slipway Tescos ll

Another Mersey ferry and another Royal Iris. This is 1:64 scale (3/16":ft), measures 29" long and weighs 11lbs. Powered by NiMH 6V batteries and Electronize 365-14 motors. it is fitted with either a self-contained sound system playing the 60's "Liverpool sound " music, or fitted with 12V NiMH batteries to illuminate the lights.

MEET MY POSH DUCK DAPA NOT A LOT TO SAY ABOUT THIS ONLY A MOMENT OF MADNESS WHEN WALKING ROUND THE GARDENING CENTER .

MR ROWEY MADE THIS A VERY LONG TIME AGO THE MECHANISM THAT WORKS THE PADDLES IS MADE FROM A WASHING MACHINE TIMER WORKS WELL ON THE WATER . AND YOU CAN JUST SEE HiS MATE INSIDE WITH HiM EDD THE DUCK THAT HE USELESSLY DRAGS ROUND WITH HiM.

THE BRUMA THIS IS A PANART KIT OPEN CRUISER YACHT ONE OF MY 1st MODELS THAT I MADE PLANK ON FRAME