HI this was my winter project the hull was given to me by my son who got it at a car boot sale it had been on fire as it was driven by a petrol engine in now has twin brushless motors with 45mm props but going to put 50mm props on when they come as it needs a little bit more speed Built from a set of plans this my first go at this as I build from kits in the past cabins made out of 3mm/1.5m ply and some 1.5mm balsa wood . Hull was sprayed and the deck and cabins brushed with enamel paint.

This model of the tourist attraction in Liverpool a few years ago.Sadly after a couple of mishaps all four have been withdrawn from service. The model however survives. it was scratch built from photos and site visits by myself (Max Ferrie).There were no plans available. it is about 28inches long and roughly 1/12 scale.It was built almost entirely from plywood. As you will see from video it operates on land and water. it is six wheel drive using differentials on all wheels. When in water it is prop drive. it has two small electric motors for power, the wheel drive being very low gearing (too low really it goes very slow on ground). it was completed in 2010, and is filmed sailing at the portable pond at Toys For Boys in Waterloo in 2010. it has sailed at Hoylake MBC also.
It is powered by two 6volt 4AH batteries in series to give 12volts.

twin speed 400s driving stock (kit) props off 1 6 cell NiCad. Speed is "moderate scale"

💀 Hello friends, I am sharing a kit that sells here in Brazil. This is a fishing boat, a motor included in the kit 380 brushed, propeller shaft, pipes, all made of balsa. To put my touch to the lighting, did the radio antenna, put some flags. Detail is left with the box of fish that are rice painted with spray paint aluminum.

Single 550 Brushed Motor and Reversible ESC, 2S LiPo, 2.4GHz Radio System, Turnigy Blue Prop, 2 x 9G servos for rudder and lights.

Functional Nav Lights and wailing siren.

OA Length 690 mm, Beam 180 mm, AUW 1656 grams.

Following the legendary Keil Kraft Eezebilt plans for a Mermaid Ocean going boat. Plans exploded to 200%. Trying to build it completely out of Plywood and Foam Board.

OA Length 710 mm, Beam 180 mm. AUW 1.98Kgs.

She carries the name 'JAYSHIL". it is a portmanteau derived from the names of my late parents.

Model features working lights as prescribed by the international Maritime Authorities:

http://www.bosunsmate.org/seamanship/lights.php

In keeping with Rules 22 and 23:

http://www.bosunsmate.org/seamanship/rulesoftheroad.php#rule23

Brushed 550 motor, Reversible ESC, 2S LiPo, Turnigy Blue Prop, Working Lights and indigenous Sound Generator unit.

Video is available here: (you may need to turn down the volume a bit as the horn is rather loud)

I would welcome any queries and/or comments on this build.

Thanks and Regards,

VC

I have just acquired a part built original kit. I will be restoring this to its full potential in due course but am sharing the pics for now. I will post as a build blog.
Condition is good and the build seems to be to a good standard. I intend to replace the single proptube with a double and use a couple of brushless motors. 👍

Sometime around 1968 I found a small set of drawings, about A4 size, for Sct. Knud in (I think) Ships Monthly. So I enlarged to 1:32 scale and made my model plank-on-frame with GRP overcoat. She is powered by a 6V Pittman motor driving a self-made scale prop and 2:1 gearbox. Steering is effected via chain and quadrant as per prototype! Everything bar the anchor, anchor chains and steering chains is self-made using a variety of materials (brass, plastics, 'Perspex', and copper electro-deposited cowl vents). Recently I fitted her out with LED lights: interior, navigation and working. One might notice that I abhor a working boat looking like "Daddy's yacht" and so I apply custom dings, stains, oil spills, scratches, wear and tear to my tugboats 😀 My Knud runs as well today as she did 45 years ago and in all that time has only needed one repair to her gearbox!

My own design deep "V" hull with upper-works loosely to 1:15 scale replica of the Mitchell 31 boats previously used by various Hampshire constabularies in and around the Solent. The intention is to fit this model with a working, rotating, radar scanner using the servo motor and gearbox from an old video camera lens system; working lights including flashing blue police lights and a sound-alike "wee-wah" siren - just for the hell of it (and because I can)! Technical details: Hull length: 867mm. Construction: GRP layup with 1.5 and 3mm ply and balsa deck, cabin etc. Motor: MFA Torpedo 850. Propeller: X50mm plastic. Battery: 2 x three cell LiPo pack in parallel. Speed controller: Mtroniks Viper 25Amp. Radio: Hobby King 2.4GHz.

I've at last done something with my mystery Orange hull, featured earlier, whilst in St Lucia last year I saw a launch used as diving support with almost identical shape called 'KIKA' so that's what it had to be!
Power from an old 600 Johnson type motor with 7.5v battery and 20A ESC, with prop & running gear from my oddments box. Tried her at Mangerton Mill last week, she goes well but needs a more powerful ESC as 15A fuses blow at 3/4 power, also veneer deck has started to bubble - so work in progress really!

Chris

Built out of house guttering to a scale equivalent to model railways HO the layout is approx. 4 x 3 ft. Mounted in a wooden frame and provided with a protective see through cover it fits into the car and can go anywhere. it has been an on-going project to build RC boats to suit. Those used at present are commercial products (loa 5" (125mm)) with simple two channel two prop drives - not proportional but with forward and reverse and by operating one or both props plus reverse steering is OK. Battery life limited to 6-8 minutes with similar recharge time. Built largely from scrap and odds and ends the project cost well under £80. The idea is/was to have several units and link them together to make a large layout!

RTR minI electric speed boat with proportional 2CH RC. 280mm loa (11")

Good boat and fast. Watercooled brushed motor. Normal problem with commercial mini-boats is lack of proportional RC but this is fine. Battery life about ten minutes - low freeboard and takes on water but electrics/RC have proven resistant to regular swamping!