My uncle Peter was a flotilla leader with coastal forces in the Mediterean, in the second half of WW2 . My late father, Douglas, his brother, built the pictured MTB in 1956. it ran with i.c. power until 1962, when it was mothballed.

I recently restored and upgraded the model (brushless motors etc) and thought that it would be great to take the model all the way down a lake in Devon to demonstrate it for him. Not having any local knowledge, I put a request on this excellent site, asking for help from local guys and must say that the site has some wonderful subscribers who came forward with help and support, especially Keystone. He was brilliant and greatly contributed to make the visit a great success. thanks, mate. My uncle and the other members present greatly enjoyed it, though the windy, cold conditions rendered the rum tot most acceptable!! The photos are self explanatory. The tug was there as a rescue boat if required.

Many thanks to all Model Boats' members who responded to my request for help.

scratchbuilt from downunder. nearing completion

This is a 49" Perkasa built from a ply Precedent kit - the build blog is on this site. Videoed from a 46" Fireboat on a lake in Western Australia. Neither boat is running at top speed, which is spectacular but overscale! Both boats have identical brushless motors. Apologies for the video being a bit long, and for the water on the lens, but this is a first attempt and I hope you enjoy the music.

Hi
i post som more pictures of my Fairmont Alpine built
a lots of putty and a lots of sanding

This Higgins PT boat was built and sailed by a good friend of mine. it is scratch-built. it uses a single Turnigy 3639 1100kV brushless motor and LiPo battery. it is pretty new and has not had its number painted on as yet. its performance is excellent.

as earlier message says 93 was an internet buy and was built in the fifties by a scots gent whilst serving in the royal navy and was built in the persian gulf. 94 was built by me in 1959/60 whilst doing my national service in the raf on the island of sylt germany sailed boat on my returnhome the lake at the exhibition park where my brother and i were members of the model yacht club no r/c in those days it was too expensive just a diesel engine and a rudder an away it went

this model was built1959 by my brother its based on a thames cruiser similer to the dunkirk little ships built from plans and is planked over frame consruction ive just completely refurbished after it fell into disrepair due to damp storagefound some pics of boat prior to recent refit you csn model is down inthe bows due to an intake of water hence the the refit ken0191

Some of my boats during a last weekend outing. Boats are at My Harbour. The blue boat (Fishfully Thinking") is based upon American-made Chris Craft 30 Tournament Fisherman, Stamas 32 sedan, and Bertram 28 boats. The yellow boat ("Cheapskate") is partially based upon a Bertram 31 sedan. The white vessel ("Juyilanga") was inspired on now defunct company's Uniflite 28-footer "Salty Dog" sport fisherman. Last but not least, the pink boat ("Pinkey Pie") belongs to my daughter and was built using an old Graupner kit inspired on a Chris Craft Roamer of the mid 60s. 😁

Built as a rescaled version of a free plan in Model boat magazine (Dec 2009) now scaled to 1/16 to allow rc tanks to be carried

I built this from scratch for a friends grandson as the lake they sail on is full of weed just hope he likes it

Zoom 1 (Interceptor) Mono boat.
Built from a Glassfibre hull, brought on Ebay for £35 the hull is a slim mono racing type with a self-righting side cabin it runs a 1400W 14V 2958 4200KV Brushless Motor and 29-S Water Cooling Jacket with additional air cooling fan.
I did not want to use a flexi drive as high maintenance and prone to failure so the shaft runs via two universal joint one at each end. the propeller is a 38mm copper alloy
The ESC is a 200W and water cooled the twin rudders supply separate water one for the motor and one for the ESC.
The rudder are positioned to reduce prop-walk and are hinged to prevent damage if you hit a object in the water and also for ride adjustment.

Turn fins and trim tabs for ride adjustment were provided by a spares kit for another boat. also foamed and added an inner sealed hatch, a rubber bump strip and safety loop.

Brought this vintage Aero Kits RAF Crash Tender for £50 from Newcastle area, it is the 34in version.
To my surprise at home I found that it had a Bullet 30 motor installed these motors were the top drawer motor of early fast electrics in the early 1980's and its the only one I've ever seen, it can run on 24v and pull around 15A giving 300w not bad for a brushed motor.
due to the power of this motor I have modified the hull under the water line with turn fins and trim tabs to reduce torque roll and improve turning stability, the underside is incorrect already as it only has one propshaft, where the original had two and I believe that both props turned in the same direction.

The Pictures here show some of the work in progress I have remounted the motor and added a speed controller rated at 24v
I have remade the stern compartment and rudder gear under it.
I have blocked windows and foamed the front half of the boat.
made missing parts and repaired delaminating ply.

Note old ply is not as good as modern, the glue is not as water resistant.

Have painted the hull and have just ordered the decals from Cornwall model Boats :-https://www.cornwallmodelboats.co.uk/cgi-bin/sh000001.pl?WD=hose%20fire&PN=becc_fire_tender%2ehtml#aB_2dFTS1_2e32

The 34in is 1/16 scale

Fitting can be brought but many are cast white metal and can add weight to the boat, I have made two water cannons and plan to buy plastic fittings from this site.

This has turned out to be a task that is difficult to assess how much effort and money to spend on a hull that has been built by someone else (say no more).
Have just finished the steps for the stern compartment.
Painted and now for the test run.
the Bullet 30 motor ran well between 14 and 18v,