Built from a Traplet plan in 2013. All wood construction, JP 400 direct drive motor with 2 blade prop. 2x 3.7amp 7.2 volt NiMhd batteries wire in parallel and a Mtronics marine 15amp speed controller.

Here are some pictures of 1/24th scale tugs sailing at Bluewater
First==== Atlantic Cock
second===Sauria
third==Sun XXIV
Fourth==Rana

here are some pictures of tugs towing at Chantry model club Bluewater kent

this model was made from a set of mouldings purchased from the internet, they were for a 1944 Birch class empire tug, the one I chose to make was the Empire Walter, later re named Sea Queen and she worked in the Bristol and Avon area.

This tug was made from a Tito NerI tug kit and modified to make it look more like one of the local tugs near my home, she is fitted with two azimuthing propellor units driven by 900 size motors and a bow thruster unit

Goes like a bat out of hell
Please forgive the fingers 😁

View from aft under construction. I am planning on adding a smoke unit.

She will be powered with an electric motor, and she is an R/C tug. She will have the maiden voyage this spring. Here she is seen under construction.

Here are some pictures of my new tug boat under construction. it is almost finished. I made some changes to make the tug look like a Turkish tug around 1930's. Her Turkish name is Kalender. Original kit is 1/30 scale Panart Anteo model, 890 mm long.

This is a Chris Brown fibreglass hull for Cariad, it was a reject so Chris let me have it cheep. I like to be different so I built it as Spray of Newport. Sailed well on internal ballast only just adjust the rig to suit the conditions. Two sail arm servo one on main other on fore sails. Rudder controlled from under the deck by servo 3. The westerman ( who sails the boat for the pilot) holds the tiller which moves his arm. A forth servo pulls a string passing up his leg through his arm which is a spring. When the spring is compressed the arm waves in a random way. ( the idea came from the toy animal on a stand when the bottom of the stand is pushed in the animal falls down.)

See forum and my harbour (CapnJim) for more details.
Just some footage of my weathered Model Slipways Puffer - now some years old but still cruisin'. Still appreciating the model and is one of my favourites. One day I'll build a puffer at 1/32nd. but for now this does very well.
Easy build but lots of opportunities to add detail. This has all the bells and whistles (well 'steam' whistle, smoke generator and puffer engine sound at least). Would fit in a briefcase but still able to stay afloat against the wash of bigger boats or blustery winds. Surprisingly, steers well when going astern. Speed with supplied motor about 2mph ' but this is faster than scale by a margin.
Clip prepared for YouTube resolution so best not viewed full screen.

HI this was my winter project the hull was given to me by my son who got it at a car boot sale it had been on fire as it was driven by a petrol engine in now has twin brushless motors with 45mm props but going to put 50mm props on when they come as it needs a little bit more speed Built from a set of plans this my first go at this as I build from kits in the past cabins made out of 3mm/1.5m ply and some 1.5mm balsa wood . Hull was sprayed and the deck and cabins brushed with enamel paint.