London tug boat. 1:32 12v engine. Radio Futaba 7c. Lights and radar.

hI all this my jet skI fitted with a brushless motor 2700kv with a seaking 125amp e,s,c goes really well running 14.8volt lipo tops 32mph
I have two and they are both great fun

This boat is scratch built on a Fiberglass Hull. The Lily was one of two ferries built in 1900. Her sister ship was the Rose.
The superstructure of the model is largely light-ply and paneled to resemble the orginal. She had an open top deck and as you can see the navigation pods were open to the weather.
A semaphore signal arm was included as radio was not yet used to communicate with each other on the Mersey.
The model is approx1/48 scale and built from a couple of photos and sketches that exist. She is powered by two 340 electric motors and controlled with 2.4ghz radio. A 12 volt battery gives the power. Both decks are individually planked.
She has sailed at Hoylake.

SHE WAS DONATED TO FURNESS MODEL BOAT CLUB AND WAS SCRATCH BUILT SHE HAS JUST MADE HER LAST VOYAGE UNDER THE NAME SAGA LADY CLUB MEMBERS HAVE GIVEN HER A MAKE OVER AND SHE HAS THE OLD ORIGINAL MOTORS POWERING HER ALONG SHE IS A VERY GRACEFUL MODEL AND SAILS VERY WELL

Hi!
This is a scratch build from plans, of the "Angel's Gate II" , at the Los Angeles Maritime museum. This example has a bilge pump, diesel horn, and will be adding a fire monitor. My nephew is pretty excited about it, he is 4, and already has been practicing with the transmitter!

A scratch built model of a Gloucester USA fishing schooner 1900 era. Pine plank on frame, 2 channel radio with a Lego 9volt drive unit as sail winch controlled each way by servo and micro switches, the deck is planked on a thin ply sub-deck and deck openings are sealed with Vaseline. The deep keel slides up into a box through the keel and secured with a bolt.

HI All, Heres some pics of my "American" tug boat based on one of McAllister's tugs. it is scratch built from Images on the net, plank on frames in pine, cut on my bandsaw. it has working lights and radar scanner. it's powered by an electronize 540-12 motor and a 6v 4amp SLA battery.

this I my collection of lifeboats all scratch built

Another damaged fiberglass hull rescued. every thing else made by me. At 3/4"=1' a very big model. Completed 2012 but only sailed twice, a very good sailor just needs a big lake. The mast lifts & folds forward after removing the hatch. The top mast lowered, the bowsprit retracted and the sails raped around the shrouds, held in place with masking tape. ( this stops the lines from tangling.) Takes about 5 minutes to reassemble.

A Graupner kit built some years ago, was given to me 2013 and I have refurbished the boat to get it sailing again! it has a Mono- perm motor and I have fitted 10 amp Mtronics speed controller and running on 8x AA 1600m/a Nicd batteries wired in parallel.

Mobil Marine fibre glass hull, 545 motor, 6 volt 4 amp GelCel battery. I believe it is Gaff Rigged Cutter. That is all I know about this boat as I bought it second hand in 2013

Built from a Traplet plan 2012, all wood construction with plank- on-frame hull. 385 direct drive motor with 3 blade prop, Mtronics 10amp speed controller and 8x AA 1600m/a batteries wired in parallel.