Just a little run today & there was no Lobsters in the bay today The Model is a Midwest kit with a bass wood hull the kit had balsa wood & fiberglass but I like basswood instead for the hull . The name of the boat is from a Stompin Tom Conners song .
Quick vid showing operation of steering and reversing bucket. Steering nozzle reduced in diam and made from a brass reducer, and reversing bucket moulded from f/glass with brass pivot and lever inserts.
Just an observation when the jet is pointing rear then left a right appear to be sending water L & R but when the rear cup is dropped in place does L & R get reversed due to the curvature of the cup ?
Hi Mike, the bucket has a divider in the center, so when the bucket is down and the nozzle is pointing either side, the water is diverted out that side (at least in real life😀) ie. nozzle points right, water comes out right,- (pushing stern left) nozzle straight ahead,- braking, - nozzle partially up, neutral (in a full size boat, jet runs all the time with motor,-no real need for this with electric. Bucket will be on a TX rotary sw to allow easy positioning (or perhaps on a 2 pos sw).
Will no doubt need to make some mods once in the water as this is experimental (don't think I'll fluke it first time) ie, may need the bucket to go down further (cup more) nozzle bottoms closed in etc. Fun playing though😁
JB
Hi. This is my 2nd scratch built boat since lock down began. The first was the H S L 103 finished 6/7 weeks ago. Still waiting to be tested outside of workshop. This one is built on a fibre glass hull,and has a length of 44 inches and a beam of 16. My power plant is twin out runner motors purple power. 600kv, running through twin 70 amp ESC and with 4 cell 5000 amp lipos feeding them. All accommodation is made using 6 mm three ply. And every fitting you see on the boat was scratch built by me. Lighting system is 12 v grain of wheat .props are three bladed brass 45 mm by prop shop
A test post on behalf of redpmg.
The engines are built by a mate of his.
"The boats are built by a 90+ year old gent by the name of Alan Raubenheimer, who used to make Rose Pop Pop Boats - used to advertise in MB etc.
Now into his 90s he has finally given up production."
Here goes🤞
Doug
It woiks 😊; just ignore the 'Invalid file' notice and click the blue magnifying glass and then the download button.
Run with Windows Media Player.
When it opens Press F11 for full screen or drag a corner with the cursor to enlarge.
Resolution is not too good I'm afraid🤔
Despite the music the action takes place in SA not Hawaii!😉
Hi Doug, I finally figured out how to open this - it was well worth persevering with, this has a real feel good factor especially with the music and I like his R/C, and a steam outboard engine - brilliant.
At last after 8 months I've finished my Vietnam River Gun Boat.
I've built this vessel using a made up fibreglass hull that pretty much measured up to the 1/9th scale with some modification that I wanted.
I will post photos of the build of the build over the next few weeks and answer any questions as they arise.
These pics show the initial hull modification underway.
Interested in your build of the Pibber River Gunboat. I have the Pro Boat version which performs well. Would like a bit bigger hull as there is not much room for normal size batteries.
Which hull did you use?
Also interested in the Patrol Craft Fast ( Swift boat)of the Vietnam era
Hellenic Navy - La Combattante IIIb class Fast Attack Craft
More great photos in this series taken by my friend at Albert Park Lake in Melbourne. These of my P28 - Ensign Simitzopoulos. Great wave patterns. These photos were all poster size in detail. I have had to shrink them to get them posted here. This boat is in my harbour.
The 1/35 scale boat is scratch-built, mainly from Balsawood and marine ply with a fibreglass covering. The guns can elevate and rotate. The radar units both rotate and there are LED navigation lights that I forgot to turn on. There is also a flashing red LED strobe warning system. It needs a little work to get the 4 LEDs a bright brighter.
Trying to alter the side of the lake when I went on Sunday - bumpsa daisy :-) and it did send one of the gun turrets into the lake but fortunately I got it back :-) sorry about the sound track though :-)
Ahoy Maties! it's been a long time since my last posting. Happy 2019! I just completed my new scratch-built boat "Electric Barbarella". I tried to recreate (with some liberties) one of my favorite boats of all time, the 30-footer Chris Craft Sportsman built during the 1970s. it measures 24 X 8.5 inches. it is powered with a 9.6 NiMH 4200 mAh battery "nunchuck" pack (like the one used for paintball guns), brushless motor attached to a 30A Mtroniks Hydra controller and a 30mm M4 3-bladed brass propeller. The hull (my own on-the-go design) was made out of Balsa wood which later I fiberglassed. For the superstructure I utilized 2mm ABS plastic sheet material. To my surprise the boat turned to be a very stable and forgiving platform. I really feel a very close connection to this vessel as it is my first own hull design.😁
Members might like to view my experimental solar powered "BOAT " More like an aircraft carrier !! No batteries carried even for the radio. Brushless motor running from 24 cells giving 12volts. Slightest shadow will stop it.The panel i made myself by buying individual solar cells from Ebay and soldering them up.The cells are sandwiched between glass which makes it quite heavy and next project will have no glass but the cells are VERY fragile.
I wanted to demonstrate that a vessel could move due to the power of the sun alone.Introducing a battery would confuse the issue and sceptical people would claim that it was the battery doing all the work !! Cheers
British Power Boat 64 ft RNZAF HSL scratch built 36" R/C model with twin systems including sound. Brushless 2000kv w/cooled (pump) in-runners, 30A car ESCs, 2200mah 2s LiPos remote lights etc. Started off in 1940, new with the RNZAF and had many modifications over the years till decommissioned, including machinery reduced to twin 671 Greymarine GMs (from the original 3x 500hp Napier Sea Lions) which were finally removed around 7yrs ago and replaced with a single 650hp GM Detroit 8v92T1 (still does 20 knots in its latest configuration ! - see this on the photo gallery of this model) This boat is in far better condition than the ex Phil Clabburn restoration of HSL 102 (he didn't have much to start with) and the hull has never had any major rebuild apart from being glassed to the W/L. Even today there is no way most people would pick it for 80yrs old. Those hulls never age! (ie some of the beautiful 'Whale Back' conversions still around)
Thanks for the positive comment, and yes, it''s a great pond, part of the Gulf Harbour development on the Whangaparaoa Peninsula in Auckland. it is home to the Gulf Harbour Radio Yacht Club, the members having built the jetty, and they race a number of times a week. I am about 15 km away in Red Beach but its worth the 15 minute drive on a day such as this one.
Cheers, Nerys