HI All, E.Raymond is 36 inches long x 9 inches beam. She is scratch built, plank on frame with 3mm ply deck. I made her from the Cervia plans and enlarged them to 36 inches. She has a 540 type motor which I rewound with 80 turns of 30swg wire, for more torque. She has a 4 blade prop 60mm diam. and powered by a 6v 4amp SLA battery. I started the build last March, she's not quite finished yet, needs an anchor winch making and a set of tyres on the sides and other small details. I sail her at Holyhead Breakwater Park when I can.

Building from plan going to run on a Johnson 600 powered by a 3 cell lipo with a 10" shaft & 42mm propeller it will be going to a pal in Scotland when it is finished

Ahoy
Here is a display model I built it is the late great RMS LUSITANIA scale 1/350 built for show only it took me 7 months to build a one of a kind kit something you don't see everyday built from a kit mostly scratch built did not like some of the kit parts so I made my own.

My own design double acting twin oscillator. Running under steam for the first time. Steam pressure down to 5psi. By the bench on the floor a derelict fire boat, re build one day. installed in Duke of Devonshire.

Designer: Vic Smeed

A 1:12 scale model of a Thorneycroft RAF launch, length 43in., beam 12.5in Suitable for 2.5cc upwards. Excellent for R/C. Completely detailed on two large sheets.
Myhobbystore uk. MM412

I built this Range Safty Launch two years ago and I am now changing the hull paintwork to also include a water line. I never got around to doing this for some reason.

Range Saftey Launch

I purchased the plans for this model after my late father passed away, he too was building this model but failed to finish it before he died. My father was an Ex RAF Patrol boat pilot, hence the design was appropriate. The plans (Two sheets) are really well presented and easy to use. Each of the sheets provide ample detail to construct the basic model and if you are an experienced builder then these should suffice. However, a little research may be required to put the final touches together for the completed model (If you are a perfectionist like me). These plans are suitable for a novice as a first time project. This being my first attempt at a scale model. The boat once completed sails really well. I fitted mine out with electric motors, speed controller etc and when on the water a few heads turned! Fantastic plans GO FOR IT! Roy McCluskey

My first build added nets and radar since video, like to video in slo mo think it looks cool

Scratch built. 1:16 Scale. All data researched from internet.
3D CAD modeled.
IC 16M is a swedish 15.9m. Aluminum Coast Guard Boat driven by 2 800HP Jet'Drives. Max. Speed 50 Knots. Builder: Dockstavarvet.
Model constructed of all glued ABS 1.524mm (0.060") sheets. Deck details under construction.
Powered with two 28mm. Kehrer Jet Drives. 2 Swang Hobby 1200 KV brushless motors 2 90A Seaking ESC 5S / 18.5V - 25C -5000 maH LiPo Hyperion Battery.
Weight included 1 Bat 4300 gr.
Running at Mazenod Road Pond, Winnipeg, Manitoba, Canada. Oct 19th -2014
Jagged video because of stabilized feature from Youtube.

Hey Mates,
This is my first attempt at stick building a boat. it's a DUMAS (model 1203) 33" 1:16 scale Coast Guard lifeboat. Am learning OTJ (on the job)....
The kit is approx 6-7 years old found it on EBAY for $77 USD. Nice wintertime project.
Happy Trails.....

R6M yacht the hull was built from plan by a friend he is building a new R6M Called Romanza I was lucky enough to get this from him it will be getting a coat of paint after I have finish the undercoat and making sure the fin box is completely sealed the new masts & fittings on order from
PJ Wiles hopefully it will be ready for the spring

This is the first post Iv put on any site so ......here goes.
I have 18 boats ..................Yes 18 , and Im still married lol !
Love this boat , just going through a re fit , power wise etc,
just was not powerful enough. and too clean .
so decided to try my hand at weathering .
a bit daunting building something "pristine '' ish
then trying to make it better by roughing it up .

my mate Toms Drifter his 1st build I hope to get him to join Model Boats soon so he can share in the vast amount of knowledge on here

Designed by Vic Smeed in 1966 for the Magazine, Model Maker. Plan No. MM1048. Bought plans from Member and decided to build it as an upgrade to Wee Nip I.e. one sail to two sails. Sailed well. in strong wind had problems with mainsail so fitted a kicking strap which really made a difference.