ON THE WAYS: 1:48 SCALE USCG 140' BAY CLASS ICEBREAKING TUG; FIBERGLASS HULL WITH WOODEN CABIN/SUPERSTRUCTURE KIT FROM COAST GUARD MODELS IN CHICAGOLAND. WILL BE REPRESENTING ONE OF THE CUTTERS I SAILED ABOARD IN THE EARLY '80s.
USCGC KATMAI BAY (WTGB-101), H/P SAULT STE. MARIE, MI, USA.
Dave W
I hope this helps if not let me know & I will take more pictures
i was able to put a high deck in because of the size of the hull
it might be difficult to do this with the smaller hull take a look on SLEC they do the River Police Launch (last picture)it appears to to be risen at the front to take the motor etc
The Vintage Model Boat range are now being produced by SLEC Ltd. All our kits come with all parts cut by CNC router or laser, plus all the necesary strip wood is included, along with building instructions and plan.
The River Police Launch has been based on the old Veron Kit from the 1960's that we all loved at that time. The model is not a scale model but embraces the boat design of that era. The kit is now fully laser cut so all parts are pre-cut and most of the parts are now made out of high quality ply, so obtaining a good finish is easier to achieve. The model can be powered by a 7.2 volts standard buggy battery pack or ic power of .5-1.5 cc engines which is not in the kit, also we have not included any running fittings as we feel a lot of modellers will have or would like to choose for themselves, but we can supply these fittings if required.
I like Douglas Adams books. ..(and Terry Pratchett too)
But I was most attracted to Gusty Cat ...
So.. Model of thames barge , build according to modified plans of sb Lady Daphne in scale 1:28 (length cca 1 meter ).
it will be again a model with an auxiliary motor, staysail class.
I am currently grinding the laminate hull with several layers of putty.
It is an ungrateful job.
By way of a contrast I found some video from 2014 at the St Helens Open Day.
Beautiful scale model Crash tender operating at some speed.
Nostalgic or wot.
Great model Paul and well sailed
Dave
1/50 scale scratch built model on a GRP hull. Powered by one electric geared motor and chain driven drive to paddles. Sail her on Mary Stevens Park Pool, Stourbridge.
Built her ten years ago over a period of 5 years
Scratch Built 1:32 scale Dover Harbour Board Tug, DHB Doughty.
The main hull is a standard Damen hull purchased from Mobile Marine Models, see their website for Portgarth.
the hull is fitted with 2 x T12 Motors for the main propulsion,2 x 60 degree kort nozzles for steering, with 2 x purpose made brass props.
Also fitted is a 12v Graupner water pump for the working fire monitor and Fwd spray bar, 2 x Mtronks 15 amp ESC's, Futaba steering servo and Futaba 40 MHz Receiver.
Approx Dimensions including fendering Loa 41" Beam 14"
Recently built from an Aeronaut kit, this is a 1/24th scale Pilot Boat based on a German design. Powered by two 540 brushed motors with 3 bladed brass props it attains something like scale speed. The colour is Volkswagen Bright Orange, courtesy of Halfords and the non-slip deck is acrylic green mixed with silver sand then covered with a silk finish varnish.
The boat was filmed at an illuminated regatta staged by Bournville Model Yacht and Power Boat Club on their lake in Bournville, Birmingham
%u2003
Hi Colin
Yes, I did brush paint the deck with an inexpensive acrylic.
The sand mix was trial and error. I started off with a thin mix and gradually added more sand, testing it on scraps of plastic, until I was happy.
A brushed coat of satin varnish waterproofed and added to the realism.
Best of luck.
Steve
Sunday sailing and a chit chat down at NorthWest Scale Model Boat Club,Squirrel Lane,Horwich,Lancs.Thought I'd put on my first video,just myself and husband watching a couple of the guys on a pleasant Sunday afternoon.
This video shows four New Zealand frigate models, at 1/48 scale, radio-controlled, HMNZS Canterbury leads, then Waikato, Otago and Taranaki. All models built from scratch, from Navy plans.
Build time about 6 months each. 1970's era idea based on a photo of these ships taken sailing in Wellington Harbour.
HMS Nelson, scratchbuilt to 1/8" scale. Powered by two motors driving twin contrarotating shafts with three blade props. She sails on Lake Lisgar, Tillsonburg, Ontario.
I decided on Nelson as she took part in Operation Pedestal, from which I made a 1/216" waterline model of SS Ohio, the ship that saved Malta.
She took a little over 600 hours from solid chunk of basswood to launch. Probably info collection took as long!
1/12 scale kit from Metcalf moulding the most difficult part on this model was the rudder section,you have got to get it right because once fitted the deck goes on and there is no turning back,it has 2 X 550 motors on 8.4 sails very well,not to fast but not to slow either,I sail at king Lear model boat club in leicester when I get a chance,lovely big lake all type of vessels on water,eg"
: steam,electric,ic yachts what ever you like
