Hi.all.new to.my.fleet is this lovely 42"x11 tug called Amsterdam. I' am going to put her back to original and use her for towing. But before I start the over hall. I need some help people can't find this kit Any where all the ones I van find are pvc hull and thus one is full wood plank hull and and top and all the fittings are.led.and.brass. So want to no.the.age make and any other info someone has.to make.her.right

This is a 30-inch static model of the trawler that had suffered damage and had most of the deck fittings missing when I got a hold of it.
It was 'de-constructed' by Victor Marcham of the Mablethorpe Model RC Boat Group. Being a static model, it had to be bored through to fit a propshaft, a motor and rudder, and had new decking, mast and working LED lights.
It has yet to be weighted so pond trials can begin.

HI guys I've been luckily enough to of had the chance to buy this boat at the Heywood bring and buy.
It's in 1/16 scale and is four foot long. it's a complete scratch built hull using plastic sign bord.
The hull was built by Nick Rigby from our club in Bury.
All the rest of the detail has been done by his friend.
At the Monment she has the props installed but no motors.
I will be fitting her out with a couple of 900kv brushless motors and a couple of 90amp esc's all water cooled.plus two 11.1volt 5000ma lipo's in parallel to give a long run time. Hope you like the pictures!

This is the fifth of the six sisters of the isle of Man Steam Packet Company, entered service in 1952 and scrapped in 1980. it is built on a Metcalf Models hull, and the superstructure is scratch-built from styrene. Fittings are a mix of scratch and purchased. it is powered by 2 Electronize motors with 2 ESC's by EA Electronics, has a smoke unit from Harbor Models controlled by a Viper ESC, a sound system from Model Sounds inc of Ontario, and powered by NiMH batteries. it is also fitted with a working bow rudder and lights, all controlled from a Robbe F14 Navy radio fitted with 2 twin sticks. Preferred sailing location is Lake Lisgar in Tillsonburg, Ontario.

Super little kit making a great model. Essentially styrene with added mixed fittings then super detailed and weathered.

Video rather shaky as operating camera with one hand and RC with the other - will Improve and add soon.

HMAS Fremantle (my first build and is still a work in progress) is a semI kit, hull and some fittings were supplied, most parts have been scratched built. She is powered by two MFA RE-385 5-Pole DC Motors, each controlled by a Mtroniks MicroViper Marine 10 ESC, supplied by one 6V 3.4 Ah lead acid battery, she has a running time of approx 90 minutes on the lake.

Lady Wooes, by Mobile Marine of Lincoln. SemI kit. I bought the hull all the timber and drawings along with dozens of white metal fittings ages ago, started it and left it for 5 years, moved to North wales and finished it. Drive is 2 Ford Cortina fan heater motors driving a pair of 55mm Prop Shop props by tank steering, reciprocating steam engine sound board, smoke unit and full working lights all from 2 X 12 v 7 Amp batteries........a good and interesting but very frustrating build to get things right.
Sailed at Erias Park, Colwyn Bay Model Boat Club and sometimes at West Shore LLandudno.

Original kit refurbished from a car boot purchase. 2 CH RC. Tried to retain orignal type features only with few extra fittings.

Taycol Meteor motor contemporary with boat controlled by servo operated resistance with sweeper arm on servo to reverse polarity at approx. midpoint.

Motor not powerful enough and max. speed disappointing so am planning to upgrade wiht more modern gear.

Aerokit Fireboat 34"
Boat was given to me in poor condition approx 30 years ago, no running gear and most fittings missing or broken, originally powered with IC motor.
I have installed a 43A 700KV Outrunner Brushless motor, Model No : XYH42-50 and a Hobbywing Seaking 60W / Reverse Program Brushless ESC bought from Giantcod, powered by a 3 cell 2200 mAh Lipo battery runtime 15 to 18min, the prop is a 42.5mm 2 blade racing prop. I am well pleased with the performance of the boat.
I belong and sail at the Hartsholme Electric Model Boat Club, Lincoln.

Hi,
I thought that my recently finished MTB may be of interest.
It consists of 49" GRP hull ply deck / superstructure. The fittings are from a mixture of ABS and metal, to give a good surface for spray painted finish.
The drive consists of twin 850 motors and twin 50mm brass props, controlled by a JetI Navy 600 on 10 cells, this setup gives excellent scale planing, but with 14 cells the performance is outstanding. I use 4600 capacity and only select the top power run in short bursts, which gives me around 20 minutes duration on one charge.
radio is 2,4 ghz so no bother waiting for a free freq.
hope you enjoy
loz.