restin
Basic
Master Seaman · 117 pts
Norwich, United Kingdom
Member since Jan 2015
Last online 5 years ago
restin’s harbour
3 boats(Pleasure Craft) Swordsman
A little underpowered so a work in progress (Motor: MFA RE 540/1) (ESC: Brushed Marine ESC-50) (8/10)
(Other) Dauntless
The original boat, commuted up the river hudson to New York and belonged to the Rothschild Family, it could…
(Pleasure Craft) Precedent Huntsman 31
Performance satisfaction is a work in progress. (Motor: MFA Torpedo 850) (ESC: Brushed Marine ESC-50) (5/10)
Recent uploads
Latest activity
Last posted 11 years ago
Harbour
(Pleasure Craft) Swordsman
A little underpowered so a work in progress (Motor: MFA RE 540/1) (ESC: Brushed Marine ESC-50) (8/10)
417
Harbour
(Other) Dauntless
The original boat, commuted up the river hudson to New York and belonged to the Rothschild Family, it could top 50mph if needed. (Motor: turnigy sk3 3536-1400k…
417
Forum
Counter Rotating Props.
I am soon to start building the Dumas Dauntless boat and I need to decide on the merits or drawbacks of counter rotating props. Also as It has 2 motors I will …
1
1,310
Forum reply
Precedent Huntsman 461/2 Inch
HI Mark, Hope you enjoyed your break. The boat was great this Sunday, planed nicely and was very responsive to the controls. The crack is minor, where the skin…
11,532
Forum reply
Precedent Huntsman 461/2 Inch
HI Mark, Does your method of covering hull with nylon and varnish work on Painted surface (IE acrylic paint)? I found a hairline crack running down the bow, al…
11,532
Forum reply
Precedent Huntsman 461/2 Inch
HI Mark, Prop stayed on OK but will be adding thread lock as you suggested. Boat took a real hammering on the rough water but only took 1 thimble full of water…
11,532
Forum reply
Precedent Huntsman 461/2 Inch
HI Mark, Ready to launch this sunday if nothing goes wrong, Everything responds to the transmitter OK I just hope that the propshaft nuts are tight enough to p…
11,532
Forum reply
Precedent Huntsman 461/2 Inch
Thanks Mark, Checked pushrods and OK, info on Motor noted, thanks. Thanks Paul, Will attempt to upload pics. hope they work this time. Regards Glyn
11,532
Forum reply
Precedent Huntsman 461/2 Inch
HI Folk, Does it matter which end of the motor is used to drive the Prop shaft? I cannot get at the end bolts that hold the motor to its frame unless I turn th…
11,458
Forum reply
Precedent Huntsman 461/2 Inch
HI hutchinson, First time I have fitted servo so I hope I've done it right. Please see pic. I know that I need to cut the spare rod that overhangs on the rudde…
11,458