About 10 years old, currently with a DC motor setup Hectoperm but complete base plate can be swapped for a 2 cylinder cheddar models Proteus boiler and steam plant. With ABC boiler control. Lovely detailed model, cruses well on 4 Lead acid batteries in parallel lots of power from the MARXX motor and 60 ~ 70mm I forget, 4 blade brass prop. Actually needs more weight in the back already 4 lumps of lead in the back and some plates of stainless steel. When it gets moving the bow wave is huge. 😁

a 30"scratch built pt. boat, I built hull from .8mm ply using a resized eezebilt 20" plan.
the deck fittings were copied as best as I could from photos and drawings found on line. powered by 2- 2200kv brushless out runner motors through 2 20 amp speed controllers. twin contra rotating props twin rudders fast and light a pleasure to build

2

Dave W
I hope this helps if not let me know & I will take more pictures
i was able to put a high deck in because of the size of the hull
it might be difficult to do this with the smaller hull take a look on SLEC they do the River Police Launch (last picture)it appears to to be risen at the front to take the motor etc

The Vintage Model Boat range are now being produced by SLEC Ltd. All our kits come with all parts cut by CNC router or laser, plus all the necesary strip wood is included, along with building instructions and plan.

The River Police Launch has been based on the old Veron Kit from the 1960's that we all loved at that time. The model is not a scale model but embraces the boat design of that era. The kit is now fully laser cut so all parts are pre-cut and most of the parts are now made out of high quality ply, so obtaining a good finish is easier to achieve. The model can be powered by a 7.2 volts standard buggy battery pack or ic power of .5-1.5 cc engines which is not in the kit, also we have not included any running fittings as we feel a lot of modellers will have or would like to choose for themselves, but we can supply these fittings if required.

Some pics of my favorite build. Made on a barebones fiberglass hull. Runs with a NIHM 10.8 battery, a 540 brushed motor and a 30A controller. Pictures taken by the Olympia Park pond in Munich, Germany.

I built this from a set of plans that i had sized up it measures 43"x12" & runs on a 1400kv Outrunner Motor / 40A esc / 11.1v 5000mah battery 3 bladed Brass 50mm M4 Prop
I was waiting delivery of a new camera so could not record the earlier stages of the build

Original design "Express Cruiser" type boat. Old home-made fiberglass hull built in UK in the 1970s and rescued from previous owner's garage. Model built during April-July 2015. Approx. 1/24 scale. in trying to emulate a Bertram Bahia Mar boat, I ended up with an originally fictitious design. Real life boat could be a 32-footer (9.75m) yacht. 3mm 9v LED navigation lights system. Runs on Mtroniks G2 3A Hyper BEC 6-12V 15A Constant controller, Biao123 A2122 brushless motor, and a NiMH 10.8v battery.

Model kit made on or about 1969 by defunct German firm Robbe based upon Chris Craft Roamer motor yachts of the era. Hull appears to be inspired on 1950s Chris Craft Constellation series. Model tried to emulate a 46 feet version. I got this one half-built and adapted as a gift for my child inspired in the "My Little Pony" characters. Approx. 1/20 scale. Authentic Chris Craft Roamer 46 measured 46 x 15 feet. it runs with a 4-bladed 40mm metal propeller, 320A 7.2V-16V ESC 30A constant, a NiMH 9.6v battery, and a Mabuchi 540 Motor.

With my boats getting routinely stranded in the middle of nowhere, I felt compelled to commission a rescue vessel and "Triton" was born. "Triton" is a Springer-type tug push boat. With a hull and superstructure consisting of an “Indiana” style command cabin, it was built using a pretty basic birch plywood American kit designed for swimming pool water polo. Kit altered to resemble a fictitious Salvamento Marítimo (Spanish Coast Guard) unit following Salvamento Marítimo’s actual boat markings. Equipment and deck layout inspired on actual Springer tug push boats supporting larger vessels and barges found in US and European ports and rivers. Model built during September – October 2015. Approx. 1/18 scale. Real life boat could be a 30-footer (9.14m) vessel. Equipped with 9v LED navigation lights and sound system. Powered by an HPI Racing 1145 Gt 550 Motor, NiMH 7.4v battery, a 3-bladed 44mm propeller, and a 6-12V 320A RC Ship & Boat R/C Hobby Brushed Motor Speed Controller.

Altered Krick Lisa M model kit seeking realism. inspired on 1970s 40, 42 and 43 Hatteras, Uniflite and Viking Double Cabin American yachts. 9v LED navigation lights system. Approx. 1/20 scale. Real life boat could be nearly 39 x 13.7 feet. Similar real-life Hatteras 40 Double Cabin yacht measured 41 x 13.7 feet. Runs with NiMH 9.4v battery, an HPI Racing 1145 Gt 550 Motor 14.4V, and a 40mm 3 blade propeller.😁

22.5 inches RC boat inspired on 1970s Chris-Craft Commander 36, 42 and 45 footer boats. Model equivalent to a real-life 36 footer vessel. Barebones fiberglass hull from a UK manufacturer. Powered with a brushed 500 motor, 30A controller, 9.6v NIHM battery. Video made during first trial at the Eibsee lake in Bavaria, Germany.

PT Boat scale 1/20 length 1.22 m, Motorization one brushless motor and two 550 14 v motors , fiberglass hull, superstructure in acrylic laser cut, details in resin and 3D print.

Purchased on well known auction site. Boat very dusty/dirty but sound. it is from a Robbe kit that was around about 10 years ago and has timber decking, built-in auxiliary motor, navigation lights, etc. A deep clean followed by a re-paint of the superstructure, rub the decking down and varnish, followed by a complete rub down and re-paint of the hull brought her back to a fine yacht. She is about 40 inches in length and sails beautifully and has great presence on the water.